after about 2 years of inactivity i removed the front bell housing of my CA18DET gearbox and installed it on a SR20DET gearbox,
the SR gearbox seams to be the exact same size as the CA after the...
Type: Posts; User: ByReaL
after about 2 years of inactivity i removed the front bell housing of my CA18DET gearbox and installed it on a SR20DET gearbox,
the SR gearbox seams to be the exact same size as the CA after the...
as a side note this is not my engine, someone from Romania opened an CA18DET engine and found this mess, anyway how could that happen i understand the head gasket blows ... but melting like this the...
As the title says, anyone any ideas on what creature could cause such a damage.
http://img385.imageshack.us/img385/2459/95644620su5.th.jpghttp://img385.imageshack.us/images/thpix.gif
...
revive a little fit the thread, i do not believe the jumping of the car is because of the HLSD. and maybe someone will read it an think the HLSD may have some negative effects
i have found 2...
YES you can export your car
registration will be the problem
if you are going to ship any car with CA18DET or SR20DET to California you will not be able to register it. (not without a lot of...
i had 4x 720-740cc Venom injectors, but they were to "good" so i had to switch to same size but Greedy ones witch runs perfect even at idle.
i would not recommend them, you get what you pay for.
GT2871R has almost 0 lag when you run 160km/h or faster :)
I ended up with Greddy 720cc, and i can say they work grate.
SARD FPR (set at standard fuel presure) + Walbro 255
i believe AFM data will be used for calculating the load value, and at a certain load and certain rpm a certain amount of fuel and advance will be sued, so it it will do the physical fiting of...
in fact i tried to use one on the 200SX but it is longer then the space between the pop up lights if i member correctly,
and i also remember that both iveco and sprinter have plastic ends....
...
if you have the chance look at a:
- VW1.9 TDI IC
- iveco or mercedes sprinter intercooler
- truck intercooler
the truck ones seams to have bigger space between tubes and also bigger tubes,...
take a spare gearbox with you :p
but they have them for about a half a year or a year listed on the website
http://www.wiseco.com/PDFs/Catalogs/SC08/NissanSubaruToyotaVW.pdf
but:
1) you cannot order if you are not from US (or...
Maybe depends on witch power do you prefer 400 HP of blue line or 450 HP of red line
http://img528.imageshack.us/img528/8334/powerbr9.jpg
i say that because i got something like the red line...
maybe because the turbo is not all, maybe porting, head cams and other mods..... and on top of that hardware mods mapping, have something to say to the final HP figure
GreeceS13 are you on standard diameter tires or close?
at that rpm in 5th gear you should have about 250km/k
please correct me but i believe that you increase the fuel pressure enough you will e able to supply the needed fuel, but increasing fuel pressure, may result in other problems. and you will also...
so at what EGT point standard / forged pistons start to melt or engine take damage?
where you measure EGT? (where the EGT probe is placed)
i placed mine just before the turbo in the exhaust...
sustained (for long time) 950'C like in circuit racing or short burst like in drag racing ?
what will be good EGT values for:
standard internals short bursts or long hi speed driving
forged internals short bursts or hi speed driving
or other engine load points and RPM and a good EGT...
i went also to take the weight of my car with another 200SX friend
200SX no abs or aircon half tank of fuel = 1240kg (with driver 1320kg)
200SX with abs and aircon empty tank of fuel = 1280kg
crower do custom stroker kits all parts are forged from what i understood
4000 usd for 4 cylinders engine
5600 usd for 6 cylinders engine
look on theyr website for more details
i have something like on HD website, and works grate electronic devices are just more complicated and with same results or worse (not talking about expensive devices with lugging and ...)
2.6L engine, 2 turbos => each turbo works on a 1.3L engine witch is smaller then our 1.8L engine...
~300 HP @ 1 bar mapping and other mods will make teh diference
GT2871R, 720cc inj , Z32 afm......
Dyno: 282 boost sowere betwen 0.8 and 1 bar...