in case any one needs to know for future reference its 71 to 86 nm:)
Type: Posts; User: marklee77
in case any one needs to know for future reference its 71 to 86 nm:)
hi does anyone know the torque specs for the hiem joint on rear lower control arm for after market jap speed arms?
cheers thats what i thought
hi guys building a new head should i use new rocker arms with new cams or can i get away with the old ones
thats what i was thinking regarding sleeving seem to b alot of horror stories with sleeves not sealing and coolant mixing with oil
i was not very clear in my first post i am fairly sure it needs a...
maybe up the boost a bit to around 500hp
nothing other than either bore out to 87 fit 87 mm pistons or sleeve the block and fit the 86.5 back in
hi as title says opinions please on sleeving an sr ive got low comp on a 86.5 piston i know i could get a 87 or 87.5 just waying up options
3071 does come with internal gate but from what i can see in the pic thats not big enough to b 3071 i have one on my car
hey guys taken a while to get these bits, but I finally got rear 350z brembos, r33 handbrake cables, r33 backing plates, r33 drum mechanisum, 370z rear disks, pads, adapter brackets and a new nissan...
https://www.ebay.co.uk/itm/HFM-BM57-Brake-Master-Cylinder-Suits-Nissan-Skyline-Silvia-Z32-Non-ABS/163712287175?hash=item261e0341c7:g:Ir8AAOSwx2hdNtP9
non abs?
##just read the decsription saying...
thank you had this page open for a long time b4 repling so had not read your post even thought it is posted after your reply
bm57 is going on the shopping list then:) there are 2 versions abs and non abs what are your thoughts on this my abs is deleted and have made hard lines to all 4 corners direct from the master
both cars sound nice love the rc5 how come you sold the s14? thats very interesting what you say about stopping distance cause I can feel on track the car will stop quicker with more rear grip plus...
hey buddy I did not realise it was you who helped me last time with this I think I am gonna have to whack 350z calpiers and disks on the rear, what are brakes are you running?
hi immy thank you for your reply yes my bmc is the internal front type I have done this and I am still locking the fronts way to early how many shims did you useand what were there total thickness? I...
hi guys n ladies to remove the stock proportioning valve on the brake master cylinder do you take out the spring and its done or do you need to cut off the male phallic bit on the inside of the bolt...
het guys I took my diff apart some time ago cant remeber what sides the half shafts fit am I right in thinking long half shaft on the right?
thats what I said I cant imagine 1mm will make much difference and would rather spend money on the track, porting polishing and shortening of the radius I will do myself got a pal with a milling...
whats a good stand alone for sr20det?
so what kind of bhp are standard valves good to? definatly gonna port the exhaust not really too much to do on the intake
yes I read that thats whats making me think about keeping them I cant imagine plus 1 mm is going to make much difference? although the super tech are nitride and the tomei have a relif cut at the...
what are peoples views on standard vales I am building a new cylinder head have a fairly powerfull motor with a forged bottom end and a garrett 30 71 the cams I am putting in are 272 from bc is it...
hey boys n girls trying to get an idea what kind of fuel pressure my fpr should be at I have got a missfire I ve been trying to diagnose for ages it was only on partial throttle wot was fine I have...
got this sorted today went to a pals house he machined a bar on the lathe and its all back in the car just wanted to say thank you for you help:)