I shall have a look at them and see what the issue could be. They were eBay ones, but I’d have thought that if it is made of polyurethane that it should be similar to the branded ones. They arnt...
Type: Posts; User: lewi565
I shall have a look at them and see what the issue could be. They were eBay ones, but I’d have thought that if it is made of polyurethane that it should be similar to the branded ones. They arnt...
I’ve recently had my engine rebuilt, and I decided to go for Polyurethane Engine mounts.
Now I’ve heard these can cause abit of rattle which I didn’t mind the idea of...... until I took the car...
So I’ve had lots of trouble getting my car to start after being rebuilt. The best I’ve managed to get my compression is C1 - 168psi C2 -150psi C3 - 150psi C4 - 100psi. I had to play around with the...
I have no washers on my headbolts, but would have thought they would come with the headbolts when you buy them if this was the case. But it would be interesting to know
It just seems to be little cracks in the spark plug holes, not the valves themselves. Over ordered some new valves just incase and all lap them in. Also the piston rings are fine, I’ve had oil sat...
Yeah at first I didn’t know about this, but once I googled around I made sure it was lined up
A
I have actually noticed slight cracks around the spark plug holes! But they arnt deep cracks
So I’ve taken the valves out today. And every single one is straight....... so I have no clue what so ever why I have little compression!
Yeah I think the timing had been off, took the head off today, seems to me like the exhaust valves have touched the pistons, I’m guessing they are bent, so will be ordering some new valves once I’ve...
It was a mate of mine that rebuilt the engine, It has been timed correctly at TDC. The Valves weren’t changed, it may possibly be them. I tried something flammable in the intake and it didn’t...
So I’ve been trying to diagnose why my freshly built engine is having trouble starting. After lots of issues, I’ve managed to get spark and fuel, so the last thing to do was compression test the...
I’ve found my problem, the friend who rebuilt my engine, put my Greddy Cam sprockets on the wrong way
I shall check my CAS is positioned correctly, and I’ll check the relay for the immobiliser. Will report back shortly
Yes I’ve connected the coil loom earth. And I shall check the CAS
So I’m getting really frustrated with my car. I’ve had an engine rebuild and I’m trying to get my engine running.
It’s cranking over, I’m getting fuel pressure, but no spark from any of the coil...
I have a photo but i don’t know how to upload it. And the earth is connected to the block. I’ve searched online and it says it may be the Check Connector for the tachometer, which is just in...
Hi guys,
My S14 has been off the road for the past 2 years due to an engine rebuild and major rust repair.
The engine is back in the car, and is cranking but I can’t seem to get any spark from...