hi, ive got a alternator thats just over 12months old, ive been running it on my drift car no problems, it stood for 3 months put it onto my daily and now its charging at 15.2v could the alternator...
Type: Posts; User: cooltiger
hi, ive got a alternator thats just over 12months old, ive been running it on my drift car no problems, it stood for 3 months put it onto my daily and now its charging at 15.2v could the alternator...
i ended up taking everything apart disconnecting everything changed location of sensor to other port on sandwich plate and gave it a oil change, i dont know which one fixed the issue but its fine now
It's a brand new gauge and sensor I know that doesn't eliminate it being faulty but you'd like assume it would be working correctly. I'll see if I can get hold of a mechanical one but if not I might...
Put a innovate oil pressure gauge in my car lastnight and noticed the oil pressure fluctuates alot and as I accelerate it drops rather than raises anyone happen to come across this before, I changed...
hi my alternator has died on my s14 just wondering where there is any uk upgrades i could buy before i buy a standard, i see in america they use nissan quests and have a ls conversion kit, i tested a...
my customized emerald green haha i was never really a big fan of the colour
https://i.imgur.com/8MKVm3h.jpg
sorry i dont have the answer but just wondering weather you or anyone else knows if i need a immu plugged in to start the car ill be running a powerfc
Hi can anybody help me i am just wondering what goes to do these plug into or what plugs into them
passenger footwell of a s14 the engine - ecu loom
https://i.imgur.com/1CTUP5A.jpg
happened to me once i actually heat seized onto flywheel how i did it was got upto 30mph (rev matching) then left it in gear put foot on clutch and slammed on using handbrake aswell and it unstuck it...
was the cam angle sensor installed properly >? i didnt read up when i rebuilt my engine had starting issues and finally find out you have to line the gear up on cam angle sensor haha
cheers for your input i will go the .72 housing on the g25 550 but in the meantime ill throw another bar of boost at this holset im running a blitz controller on a 38mm tial gate and the engine is...
That was the plan but boost controller wasnt working on dyno haha, I'm pretty sure its 10cm housing, it's a wastegate housing but I've got it welded closed and running external gate. As for manifold...
Hi I built my car end of last year and I came across a decent manifold for cheap that came with a hy35 i soon found out that turbo is way way to big and very leggy I'll post dyno graphs at bottom.
...
you can buy eye bolt spreader plates which you drill a hole and put the plate behind
https://www.demon-tweeks.com/uk/search/shop-by/q/eye%20bolt%20plate/
cant remember off top of my head but i was really surprised how little i had to do, alot of the wires in the loom come from inside the car to the fusebox and back into the car to a switch, its only...
you only need to extend about 6 headlight wires ive relocated mine under airbag panel on dash
Yes I am
https://imgur.com/a/SGsAYTB
https://imgur.com/a/SGsAYTB
Am i right in thinking
1 is switched live from full beam
2 is earth
3 is power to dip
5 is power from high
Thanks for your quick response hopefully I can get to the bottom of it
If anyone is passing through that knows abit about headlight / general wiring can I pick your brains
As the title just a quick question, I've relocated my fusebox one of my dips stay on with full one doesn't so just wondering which one is playing up haha
Cheers for your reply, worst thing is I wasn't booting it I was sat at 40 - 50 on a b road when I started to climb
I've just had it mapped afrs are perfect
Turbo doesn't have water fittings,
Crazysx it's oil temps would water pump and stat effect oil temp ?
Hi I've just built my s14 took it out for it's first longish drive I had to pull over because oil temp got up to 262 F i let it cool down then it sat at 215 - 220 for the remainder of the drive since...
Hi guys I'm in the middle of building my sr20 back up after a year of it being stripped I'm just a little stumped what goes to the little pipe that comes off the main water pump pipe any help is...
front and rears are available also the trim that the front clips into rear is 80ish front outer trim in 60ish and the trim the outer clips into is 50ish i bought all 3 last monday