Ah right fair enough! I shall enquire! Thanks alot mate
Sent from my E5823 using Tapatalk
Type: Posts; User: Chulme123
Ah right fair enough! I shall enquire! Thanks alot mate
Sent from my E5823 using Tapatalk
Also I'm located in Todmorden, West Yorkshire so the closer the better?
Sent from my E5823 using Tapatalk
Hi guys,
Bought a diff a while ago, finally got car on the road etc but it's very whiney and gets louder the faster you go, louder than the exhaust at around 60/70mph
Is there any companies I...
Ye, the S15 speedo is in the rear hubs, not the gearbox, but that's not a concern tbh
Sent from my E5823 using Tapatalk
Hey guys,
Gearbox is on, but I'm just concerned about the prop, as the S14/15 centre bearing is on the front half of the prop, whereas S13 is rear half... Can I just use an S13 non-abs prop? Will...
Well it runs fine, I took the plugs out about a month or so ago and this is what they looked like.
I'll check all the fuel lines etc today and will look at that seal around the fuel pump you...
Alright Jonny it's going up on the ramps today so will check it all out, there's a very slight split in the fuel line where it connects to the pump in the rear but that's after the jubilee clip and...
Nah just standard ones, and ye I expected it to overfuel a bit with this setup but the amount it does at the moment is wayy to much.
Before I had the fuel pump wired up to the battery it seemed...
Well I'm running twin exhaust cams and the timing seems fine to me
No its not hard wired, there is a relay and it has a 20 amp fuse in it
Forgot to mention I have a HKS Actuator fitted to my turbo aswell which sets the actuator pressure at about 0.8 bar boost
Hiya guys, I have a CA18DET with a Stage 2 H-dev chip, now I'm running a T28 with a Gizzmo boost controller and it currently peaks boost at about 1.05 bar at about 4k then after that it's about 0.96...
Hi guys,
My car is going in for its mot later today and just realised I am missing the nut from the stud for the rear seat mount on the the gearbox tunnel,
Does anybody know the thread pitch...
Also just noticed, above, my mate on his Ps13 ran 50mm overfenders aswell forgot to mention
Sent from my C5303 using Tapatalk
18x12 et20 sat a bit further out than the arch on my mates PS13, and he had to run 255/45 tyres to make them fit under the arch without rubbing. He also ran a 5mm spacer to clear the brakes.
Sent...
I'd be interested aswell...
What's the difference between basic and full? I just want to get rid of that massive unit in the engine bay!
Sent from my C5303 using Tapatalk
Not been driven like that just sat there, with a flare they should easily fit with a bit of camber aswell :-)
Sent from my C5303 using Tapatalk
This is an 18x12 et20 GTR D running 255/45/18 on my mates 14, standard suspension
http://img.tapatalk.com/d/14/02/16/zyqezasy.jpghttp://img.tapatalk.com/d/14/02/16/esu7ysun.jpg
Sent from my...
Ah really? My girlfriend lives in Todmorden as do most of my mates that own Silvias ;-)
Hi guys, First off my Name is Charlie and im 20, Ive been into drifting for the past 4-5 years and last year I ended up buying my first drift car which was an E36 325i 4dr which was awesome over the...