Search:

Type: Posts; User: bahis

Page 1 of 20 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    17
    Views
    279

    Yeah stay clear of the Greddy copies... I have...

    Yeah stay clear of the Greddy copies... I have one and it was not a bolt on part. Had to do several modifications to make it fit.
  2. Replies
    1
    Views
    74

    That should work or you could run the original...

    That should work or you could run the original 12V feed to the relay through the switch?
  3. Thread: R8 coils removal

    by bahis
    Replies
    11
    Views
    518

    I have 1.8t coils and this cover:...

    I have 1.8t coils and this cover:
    https://frsport.com/titek-cfp-030114-carbon-fiber-spark-plug-cover-s14-s15-sr20det
  4. Thread: R8 coils removal

    by bahis
    Replies
    11
    Views
    518

    You can get vented covers. If you want to use...

    You can get vented covers. If you want to use shorter coils get one of them.
  5. Replies
    7
    Views
    258

    You should never use the stock pipe with a ball...

    You should never use the stock pipe with a ball bearing turbo. The return pipe should go straight down without any bends.
  6. Thread: Cooling fans!

    by bahis
    Replies
    5
    Views
    304

    I have had Apex twin fan setup for like 10 years...

    I have had Apex twin fan setup for like 10 years and it has worked great. Gives .a lot of room compared to the oem setup

    I have Apex aluminium rad, apex fan shroud and two fans. I'm using a...
  7. Replies
    851
    Views
    173,565

    What I have noticed with mine is that the more...

    What I have noticed with mine is that the more power it has the higher mpg it gets...

    That 28.5 is nice.
  8. Replies
    21
    Views
    5,351

    I got a Driftworks BGW. ...

    I got a Driftworks BGW.

    http://www.at-r.fi/content/images/media/project_200sx_s14/s14_p09_013.jpg

    http://www.at-r.fi/content/images/media/project_200sx_s14/s14_p09_009.jpg
    ...
  9. Replies
    4
    Views
    485

    My block doesn't touch the flange.:(

    My block doesn't touch the flange.:(
  10. Just like Chriscooke said. FPR goes to the engine...

    Just like Chriscooke said. FPR goes to the engine side of the plenum. Are you replacing the stock FPR with something else?
  11. Number 2 goes to the thermostat housing. Here is...

    Number 2 goes to the thermostat housing. Here is a pic:
    http://at-r.fi/content/images/media/random/line2.jpg

    Number 1 goes to the intake manifold. Don't think I have a pic of that atm.
  12. Thread: Big end bearings

    by bahis
    Replies
    5
    Views
    266

    I have used ACL before and just put a new set for...

    I have used ACL before and just put a new set for big ends and mains...
  13. 1/2 are water lines. 6 goes to fpr.

    1/2 are water lines. 6 goes to fpr.
  14. Replies
    13
    Views
    450

    You do know that the engine is all aluminium so...

    You do know that the engine is all aluminium so there shouldn't be any rust in the cooling system... Well the rotor of the water pump is steel so if you are running only water it might rust...
  15. Luckily no. . It has been in there for the last 5...

    Luckily no. . It has been in there for the last 5 years.... :D
  16. Replies
    0
    Views
    110

    Oil pump o-ring size.

    I need the o-ring that goes between the oil pump and the block. Does anyone know what size it is?
    I could get one from Nissan, but it would take two weeks...
  17. Sorry to bump an ancient thread, but I found the...

    Sorry to bump an ancient thread, but I found the shim!

    It was....
  18. I have almost identical setup. (Except I have...

    I have almost identical setup. (Except I have GTX2867R Gen2 with 0.64 A/R housing and Nistune) I'm building the engine now so don't know yet how much power it will make. Will let you know when I get...
  19. Replies
    1
    Views
    194

    crank main bearing caps

    I started to put my engine back together, but can't rememer which way the main bearing caps should go.
    Does the notch in the bearing go to the same side as the notch in the bearing in block or to...
  20. Replies
    24
    Views
    1,160

    Or valves can be machined to same height, then...

    Or valves can be machined to same height, then you can use the original shims that are all the same thickness. (At least mine were)
  21. Replies
    6
    Views
    329

    With some csms you can keep the vvt, but when...

    With some csms you can keep the vvt, but when using stiff valve springs the vvt sprocket will start to rattle very quickly...
  22. Replies
    37
    Views
    913

    But if you get stiff springs your vvt will most...

    But if you get stiff springs your vvt will most likely start to rattle very quickly.
  23. Replies
    37
    Views
    913

    My gearbox lasted a few years with ~430hp before...

    My gearbox lasted a few years with ~430hp before the third gear exploded...
  24. Replies
    5
    Views
    327

    At least with gt3071r using a restrictor was not...

    At least with gt3071r using a restrictor was not recommended as it has one built in. I asked it from local garrett importer... But it's very important to have oil return without any bends. That said...
  25. It was a set with both SAE an metric sizes marked...

    It was a set with both SAE an metric sizes marked in the sockets, might actually be something from between... I need a new set :wack:
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4