Hi
Don’t drive the 200 much but yesterday I did and noticed at idle the oil pressure is very low (under a bar and it does follow the revs up when I put my foot down, is that normal when warm?
...
Type: Posts; User: flinty303
Hi
Don’t drive the 200 much but yesterday I did and noticed at idle the oil pressure is very low (under a bar and it does follow the revs up when I put my foot down, is that normal when warm?
...
Yep mine Hdev 2a [emoji2371]might get a propper tune on it see what happens
Sent from my iPhone using Tapatalk
Just out of curiosity, what’s the likely cause of a high idle? It sat for ages and just ran it in for mot, before it sat I took it for a really long drive and on way back I noticed the high idle but...
I’ve just had all my sills replaced and they had to replace inner sills and loads of support stuff inside, I had jacking plates made and built into the frame structure where you would normally jack...
Hi
Does any one know the right connector for these?
https://uploads.tapatalk-cdn.com/20210115/a9b8f88ba6c8e7b74d21bfc137fd8e77.jpg
Sent from my iPhone using Tapatalk
Hi
Does any one know the best replacement or upgrade for the washer bottle pumps?
Sent from my iPhone using Tapatalk
Hi just sent the car off for mot and discovered it’s needs some welding as the sills have been badly patched before and I want a proper job, I’m on the coast in East Sussex can any one recommend some...
Ordered, cheers
Sent from my iPhone using Tapatalk
Hey couldn’t find any thing but 7777 and these look completely different, can you test if they work with out rubbers in them??
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/20200430/1ca68ad4cb57227323a4519541b38fc3.jpg
I only have these 2 I’m pretty sure, what can I do with them
Sent from my iPhone using Tapatalk
Hi am after getting my central locking back as when I bought the car all the fob runners were missing and they didn’t work! Does any one know where I can get new fobs and how they can be connected to...
So I have bigger bm disc’s and adapters for my 200, I ordered the hilux pads as I was told they were deeper to allow for the larger surface area but they are the same size as my old pads? Can some...
Just assumed there was a link on here or a page with all the torque figures for an engine?
Sent from my iPhone using Tapatalk
Hi can some one guide me to the right location for engine torque settings please
Cheers
Sent from my iPhone using Tapatalk
Ohhh didn’t even think of that, as easy as changing the wires over and getting red bulb???
Sent from my iPhone using Tapatalk
Hi got an after market rear bumper and taken the rear fog off, where is the easiest place to fit one or or wire into rear lights?? What have others done?
Sent from my iPhone using Tapatalk
Following!
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/20190817/3dd9ee4b99801d1c0ff199a8274e9056.jpg
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/20190817/67ab27f85132de10a15394c0f6a4270b.jpg
Japspeed bgw!! [emoji108]
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/20190530/9eeb97c22ccf20d4cdc23eebc74a3350.jpg
I’ve just fitted these and they sound banging really easy!
Sent from my iPhone using Tapatalk
Just checked their location and yer they have moved another hour and half away [emoji849] how much you want for the injectors?
Sent from my iPhone using Tapatalk
Going to keep standard cams and just see where I am with what I have it barley gets used and want it reliable
Sent from my iPhone using Tapatalk
Is Jez at Horsham ??
Sent from my iPhone using Tapatalk
That’s cool I already have every thing but I have a spare built engine 90% done on a stand in the garage so just some thing for now.
Sent from my iPhone using Tapatalk
Basically have every thing but cams, injectors and power fc, I’m running a Horsham board at the mo so will take it along to them and see what I get,
Sent from my iPhone using Tapatalk