Reason I asked is just see how the turbo was holding out.
Type: Posts; User: wardy88
Reason I asked is just see how the turbo was holding out.
You still running same turbo Adam ?
I'll pm you Finch :)
I agree
I'm pre Facebook so still relay on carrier pigeon :)
Bump will even make a brew :)
Anyone ?
Sounds like you 'may' have put the preasure plate in the wrong way round. Have you checked it ? you have all the symptoms
Andy
Free to good home just want these out of the way by the weekend preferably.
perfectly good for skidding or to get you to next payday.
2 x Maxxis Victra ma z1 225 45 R17 ( 2mm ish )
2 x...
I ran viscous fan on my RB s14a cut into the front panel 30mm iirc
It looked factory how I did it :)
Oh dear what you getting next ?
Top man would highly recommend. Your car will be in safe hands another thing with mat is he's a no nonsense no bull sh*t guy.
Oh yes what a car And 90% of the work was done on his drive! what a guy only great builds will ever come from his company wish you all the best with future projects :)
I know this will be a very high attention to detail build . I saw what the man with four toes (Bob) did with his 32 gtr.
All the best men :)
I had a rb30/26 in my s14a it was ok for work and back ...... if you had over laid lol as for weight ratio theres nothing in it ill dig my alignment sheet out.
Mine deliverd the power brilliant .
if the screamer pipe is venting at idle. it will be a vacuum problem hoses wrong way or faulty solenoid on the controller.
just double check i had a starlett the other day made a 3" system fired...
If your going to cut the turbo housing and weld a v band closer why not weld a bend straight off the housing then a v-band?
TBH i think its too much hassle with what your up against.
* heater...
Mega restrictive that one I'm affraid. Is the exhaust manifold cast ? Can't say as I've ever seen a set up like it.
On a side note engine bay looks epic.
The perforated tube on the inside is crossed :) I'll dig some pictures out of the fabrication of the box.
Just thought id post some recent stainless exhaust work up.
Subaru powerd VW camper exhaust system
http://i1291.photobucket.com/albums/b555/wardy88/camper%20subaru%20engine_zpszytndgb2.jpg...
+1 it does look good without a spoiler
Is anyone going to squires on Tuesday obviously weather permitting?
Eyup Pal
Unplug your injectors and put a 501 bulb in the connector ( you will have to bend the prongs out ) As your crank it over it should flash indicating the injectors are pulsing.
Also...
Congratulations to you and the misses. I've got 3 kids pal and it's not that difficult tbh it's just a ball ache buying nappys again. Lol
You have more early birthday presents than anyone I know :) cars looking good tho pal