Search:

I realize this post is a bit old, but where can I get the connectors to make this Y-cable? Do you have a part number for the connectors or even the cable pre-made?
...

Z33 MAF and housing. All the cool kids are calling it a R35 GTR MAF, but it's literally the same part number.
Think I saw that Apexi also sells a housing for the MAF of you wanted to run that.

Apexi makes a good induction kit to replace that rubber intake. Easy to swap out the MAF for a straight pipe to the filter. ...

It's active, but it takes a line side input. I just teed off the left rear speaker. I can get a picture of the wiring diagram if you need it. The sub technically has two small woofers in there.
...

I fitted up one of those Bose spare tire subs from a newer Nissan. Provides just enough kick that the music doesn't sound all flat. Downside is that it didn't fit in the standard S14...

When I added my FMIC, I just followed the directions from Greddy and fed the wastegate from the smaller line on the carbon canister.

Hard to tell, but if your feed is off one of the small ports on...

Well Photobucket broke the internet, lots of forums have broken pics now. A few threads on this site came up when I was searching R33 GTR wheel and tire fitment.

I went with 245/40R17 all the way...

Probably already got it sorted. But just in case:
Red is coolant
Blue is idle air
Cap off one of the green, run other to wastegate (if using a front mount) these won't see vacuum.
Orange looks...

Had to flip two wires at the connector, and bypass ptu.

Pretty easy to move the wires in the connector.
If looking strait at the connector (terminal side), the pins should be:
S13/S14 - [ - +...

SSQV S14/S15 kit in stock location tied into stock tubes. I think the kit came with recirc adapter in the box, don't recall.

I personally don't mind paying a little more for the chassis specific...

I put up a WTB thread on a local forum and someone gave me 2 bad ones for free, I just paid shipping cost. Might be another option than tearing apart a perfectly good PTU.

Lol, that was the company I used. Glad they liked my "crazy" idea enough to make more than the initial batch of 10 I bought.

I did mine about this time last year. Couldn't find male ends, and wiring specialities didn't offer that bypass harness (they were the first I asked). I ended up having a batch of dummy bypass PTUs...

Use the oil filter for a Nissan V8. It's about 3/4" longer than the regular filter, but the same thread and diameter.

Standard OEM part number is 65F00, long would be 9E000. Mobile 1 parts are...

Sure thing.

Still live here: http://www.nicoclub.com/archives/nissan-240sx-factory-service-manuals.html

I also have a copy if that doesn't work for some reason.

Question: How does the boost curve behave on a standard S15 sr20det?

Details: I currently have a 98 S14a SR20DET running with S15 Injectors and ECU. After lots of wiring diagram comparisons, I...

First, THANK YOU for putting this together! This has been a life saver so far.

Now, does anybody have the S14 Supplement #2? This covers the changes for 97-98 models. I'm mainly looking for the...