Search:

I want to install an aftermarket alarm and immobiliser on my 14a, can anyone recommend a kit and a install guide or recommend someone who can install it,
Thanks


Sent from my iPhone using...

I'll have a look, thanks. Easy enough to fit?


Sent from my iPhone using Tapatalk

My mate has a uk s13, 1989, he's after a after market alarm with remote locking, anyone have a wiring diagram and recommend a kit.
Thanks


Sent from my iPhone using Tapatalk

I have one off my Nissan s14a if interested


Sent from my iPhone using Tapatalk

Once fuel was removed from bores and plunges removed the engine turns over freely, head is now off. Leak test on valves ok, head gasket is looking ok, am going to remove the Pistons over the weekend...

The small caps that hold the small I-ring at the end of the injector are not fitted. The fuel will now pass the inlet on the injector and fill the bores with petrol. I have a conventional compressor...

http://images.tapatalk-cdn.com/15/04/28/7d6a93a844587e92c7f5e6a0bb406c07.jpghttp://images.tapatalk-cdn.com/15/04/28/9ef3e6cffe5ed4bc837c882bc9c3b4a5.jpg

Only cylinder 2 had the o-ring intact. It...

Hi guys. I've got s14, the o-rings railed on my sard injectors and filled the bores with fuel, the engine misfired, smoked then locked up. I removed fuel pump fuse, oiled the bores and done a...

Ok I will order a set up now. Thanks a lot mate.


Sent from my iPhone using Tapatalk

Ok. Well it's running a 2871r, 850 sards, 1.25 bar and 372bhp. Should I go a grade higher?


Sent from my iPhone using Tapatalk

Bkr7eix mate


Sent from my iPhone using Tapatalk

I've been told it's to do with weak valve springs but I'm not 100% sure


Sent from my iPhone using Tapatalk

Hi. I have a slight misfire when in I'm on wot and max boost. It's not a massive misfire but I can feel and hear it. I have 2 setting on my avcr, 1.25 bar and 1 bar. The misfire only happens on the...

Hi guys. A friend of mine went for mapping last week at h-Dev, he has nismo 740cc injectors, gt2872r, z32 maf and all the other supporting mods. On the rollers it only made 326bhp. Jez said that ...

I've just had a map by jez, I've got a gt2871 0.60 housing, sard 850cc injectors, z32 maf and the obvious supporting mods, on 1.25 bar it made 372bhp (316rwhp)


Sent from my iPhone using Tapatalk

Well i have had the car mapped by jez and the car has changed massively! With the set up listed but without the cams I made 372bhp. More than happy with how the car feels now.


Sent from my...

rather than starting a new thread ill put it up here. im going to hard wire my fuel pump and was wondering in i need a relay with a built in diode...

Same as above. I bought a sheet of gasket paper and a smear of high temp gasket sealant.


Sent from my iPhone using Tapatalk

Haha. Turbo has already been sold. The injectors are coming out next week matey


Sent from my iPhone using Tapatalk

Woooooo. I'm only going off the figue on the dyno sheet! Lol. It was mapped by jez on his rollers, the car came with the different turbo so maybe it has s15 injectors?


Sent from my iPhone using...

as above, i used a genuine nissan gasket from conceptua tuning with m8 lock nuts from jez at horsham developments, been ok for 6 months now.

i went for some 264 brian crower cams and bc springs as i got a bargain of a deal from conceptua tuning, with the mods listed at the top, will i be ok with my bkr7eix plugs or will i need a different...

My mate who is doing it has the tool but not the airline connector


Sent from my iPhone using Tapatalk

http://tapatalk.imageshack.com/v2/15/02/06/3f1060766866aaf7f73ec9e772be6e44.jpg

Will that do the job?


Sent from my iPhone using Tapatalk

Hi. I'm changing my cams and springs very soon and wondered if anyone knew where I can purchase the tool to pressurise the cylinder to enable me to leave the valve in place. I know you can get a tool...