Sent you a pm. Thanks
Type: Posts; User: jamesd
Sent you a pm. Thanks
Any idea which type to get? Also seeing as mine are screwed, would it explain water in the footwell? This post should've been windscreen trim instead of seals on reflection
Anyone ever use universal ones? Amayama want a bomb too
If these seals are knackered, would I get water in the drivers footwell?
Hi all
Are s14a windscreens bonded in?
The surrounds on mine are perished at the corners and some of those insert clips are gone too.
Will that affect the seal on the screen at all?
Also where...
Hi all
I'm changing the cam cover gasket and was wondering should I be using some short of sealer as well as the gasket?have the replacement rubber one to go on
Thanks
I wasn't planning it as the discs are in good condition
Are S14 and r33 gtst the same pads?
Thanks everyone for the feedback. I'm gonna try the yellow stuff and see how I get on.
Thanks everyone for the feedback. I'm gonna try the yellow stuff and see how I get on.
My hyundai i40 stops better than my 300hp S14 so think there's an issue I took the calipers off and moving freely. I'll give the pads a go anyways. Thanks everyone
Have a bm57 as I have z32 rears too
Thanks all. Mark would I not have juddering or pulling to one side of the caliper was sticking?
Hi all
Have skyline gtst front calipers on my S14 but the stopping distance is pretty poor. I re bled everything and checked the pistons but all OK. Think it may be the standard pads.
I was...
Hi all
Has anyone run one of these?
What are they like spool and power wise. Wondering about it as an alternative to a 2860rs.what are the differences?
Thanks
Ya they are. Bled myself and got the garage to do them too before the test
Sorry for not updating. They were bought as a set discs calipers and pads. Fitted a few years ago but car wasn't driven as was restoring. Passed the brake test on the yearly test when it went on the...
Oh I thought it was an upgrade. Have a bm57 cos I put z32 on the back. Fluid is new cos I did the full system when I replaced the calipers
They are old I suppose so would make sense
Hi all
Fitted these to my S14 and not overly impressed with the braking. Seems to take a while to stop and I was expecting it to stop much faster.
There's plenty of meat in the pad, bled properly...
Right so got a bung for the exhaust to tighten the bore made no difference. Also took off the cat and exhaust pasted all the seals and nothin. Lambda sensor goosed??
Right so got a bung for the exhaust to tighten the bore made no difference. Also took off the cat and exhaust pasted all the seals and nothin. Lambda sensor goosed??
I'm literally just back from there with it
HI all
I bought a set of s13 front coilovers and was wondering who makes the sleeves to takes the 14mm s14 bolt down to a 12mm?
really dont want to drill the coilovers
Thanks
Hi all
Failed the test today on a high lambda reading.
Got a 1.31 when the spec is max 1.03
My hc was only 4ppm and the Co was 0.01
Any ideas?
Thanks