1.broken afm's don't always give fault codes - you should try a known working one.
2.it could be a boost pipe come off - check all connections
3. electrical plug which have come loose as you...
Type: Posts; User: Turbozx
1.broken afm's don't always give fault codes - you should try a known working one.
2.it could be a boost pipe come off - check all connections
3. electrical plug which have come loose as you...
cool thanks bud
Got a project s13 and the previous owner cut the plug off with the 2 wires that go to the gray plug on the alternator.
I have a new plug of an almera but the colour of the wires is different.
...
cool so the carrier is the same but the release bearing is different? is that right
can i use the release bearing and carrier from a CA gearbox or CA bearing carrier and s14 bearing
or do i need to get both items from an s14?
i dont understand whats different, is the turbo in a different place on the sr20 or does the CA elbow not bolt to the 180sx t25g turbo?
problem is the mongoose exhaust doesn't have a flange between the down pipe and cat back - its clamped together
is it a case of cutting and re welding?
Im putting a redtop sr20det from a 180sx into a ca uk s13.
the car has a CA mongoose exhaust from the turbo elbow back.
Can i fit the full exhaust with CA elbow to the SR?
looks good but i would imagine they are rubbish at night as they would be too low
it maybe be that the gasket is ok and the nuts have just come a little loose, had this before
see if you can get to some of the nuts and try and tighten them up
the one nearest your phone goes from the inlet manifold to the alternator mounting bracket
i would rather a redtop loom and ecu as the black tops are a bit different and involve more work wiring into a uk s13
thanks guys saves me messing around - need to find a redtop ecu
basically im going to put a redtop sr into an s13, and my mate has a s14a engine loom I could have.
I would have thought all the plugs would fit the redtop engine even if some of the wires need...
As above really, i can imagine i would need to swap some wires on the ecu plug but will an s14a loom bolt to a redtop sr20det ECU?
thanks for the replys people, i like the jdm options as the mapping is normally a little more aggressive.
im looking for the cheapest option tbh, its simple enough to wire the nats stuff in its just buying it id like to avoid
Firstly I dont expect an answer on how to do this, But if someone would like to PM me that would be great. I understand the sensitive nature.
Basically Im doing an sr20 engine into an s13 and have...
How do you mean hit or miss -90% of the time they will not show an error code when they are actually faulty?
Does nt seem to be leaking from round the injectors - a mate has a snap on fault code reader, i take it you dont need a fancy unit to check the live data.
Thanks
thanks could the clacking noise be diesel knock, it really is quite loud and sounds like it coming from the back of the head
Both the inlet and exhaust manifold are at the back.
How could i...
I recently brought a 2007 Ford Focus zetec climate with the 1.8 TDCI engine, it has a problem with the engine -
There is a loud tapping/ clacking sound comming from the top of the engine and...
Hi,
Lost 2 centre caps on my Rota Boosts 17x8, they are the carbon fibre type with the bolts in round the outside.
How much for 2 including delivery? (royal mail if possible) how do you take...
could well have been like that from the factory, it would'nt have been noticed with std wheels, 5mm tolerance isnt a great deal
i had 0.3mm skimmed off mine 30,000 miles ago - not had a problem, although i had no heat spots