Search:

Thanks for your help. One of the nitrile flexible hoses from tank is leaking so I'm going to replace both the outlet and return hoses connecting pump to the hardlines. I'll get some high pressure SAE...

Hi, Does anyone know the diameter sizes for the fuel outlet hose and the return hose to fit an original fuel pump? I'm assuming I can replace the existing ones by threading new ones down from top of...

Thanks everyone I've found a BM44 for an ABS Tokico system now so should be ok once fitted.

Thanks looked at item but it doesn't look like my BM44. Mine is for an ABS car and just has 2 outlets to brake lines on the side, nothing else. Thanks anyway.

Thanks. Is it one for an ABS brake system?

Thanks Slamz. I think rest of brakes are good. You don't happen to know if the S14 BMC bolts on the booster in the same position as my current S13 one and the 2 outlet ports connect to the 2 brake...

That's a BM50 right? My BM44 is 15/16" diameter and BM50 is 1" so about 14% more surface pressure from cylinder on pipes and ABS unit, which are getting on for 30 years old. I don't want to put over...

Hi, Be grateful for any advice. My BM has developed a leak at the brake booster end seal where there is fluid stain on the booster cover (Low reservoir warning light came on). What's best: try to get...

Thanks for that and the link. Going to try to get a used one first as that is a simple remove and replace. Like the 2 options though and there seems no reason not to swap the tanks unless the bottom...

Thanks mate

I'm trying to get a rad for my s13 auto. Anyone know if I get a manual one can I swap my current bottom tank with oil cooler onto the new manual one. Are the bottom tanks the same size? Dealer told...

Hi, Anyone know where I can get a rad for an 1990 S13 auto transmission? I want to keep car original but only seem to find manual ones. must be loads of auto rads pulled out to upgrade....any help...