777s12 CA18DET wont start!
Hello there!
I recently got this, a nice unfinished project, totally standard except it has a DET mounted in but hasnt been wired up or plummed in etc!
http://3.bp.blogspot.com/-q8X0jtvsGc.../s1600/0ne.jpg
http://2.bp.blogspot.com/-l3oYGkWXx3...0/IMG_0620.jpg
So first thing first was the wiring! Ive wired the relays in except for the fuel pump which im having trouble with, when attach the black/pink wire to the relay it doesn't work, but if I attach a ground it does come on but stays on.
http://1.bp.blogspot.com/-9_uT0iFPhi...0/IMG_0622.jpg
The interior is pretty mint!
http://2.bp.blogspot.com/-5btilNV3G2...0/IMG_0621.jpg
Just needs a clean.
http://1.bp.blogspot.com/-S-0QK-CI_o...0/IMG_0624.jpg
Exterior is pretty scrappy though!
http://2.bp.blogspot.com/-3iekIfqBse...0/IMG_0625.jpg
http://3.bp.blogspot.com/-bKh7_unbeD...0/IMG_0626.jpg
Missing the rear wing :(
And has a dented rear bumper!
http://3.bp.blogspot.com/--zI5OMivY3...0/IMG_0628.jpg
So taking a break from the wiring/head scratching I took a look at the rear bumper. Dont have a manual so working out how to get it off was pretty fun!
http://2.bp.blogspot.com/-4VbqOeHZFz...0/IMG_0631.jpg
I guess this is why its bent.
http://1.bp.blogspot.com/-kYUK5v0rGA...0/IMG_0630.jpg
I hoping a heat gun will make it straight!
[img wi]http://4.bp.blogspot.com/-bN_Qrz-fbLQ/U52-nV36d-I/AAAAAAAACgA/CTNuwRsGyFs/s1600/IMG_0643.jpg[/img]
Should be able to straighten this bracket out.
http://4.bp.blogspot.com/-rPzPlmqQoi...0/IMG_0642.jpg
Theres a bit of rust that needs to be sorted before the bumper goes back on!
http://1.bp.blogspot.com/-79xc6gBJly...0/IMG_0634.jpg
Put on a new hopefully correct slave cylinder? was a 3/4.
http://4.bp.blogspot.com/-h9K4hWP3tA...0/IMG_0639.jpg
Need a new Power steering pulley as this is a v belt one.
http://1.bp.blogspot.com/-BwNtGDFGRc...0/IMG_0648.jpg
My plan is to get it running and then legal for the road, then just muck around in it for the summer, might even lower it ;) Then I will pull the motor and sort the bay out and go through the loom properly eliminating all the spare wires as its a total mess in their right now!