Printable View
Hi Guys,
Recently acquired my first 200sx 2 weeks ago, so a newbie to all of this!
The car has been a project car for the previous owner who fitted a SR20DET engine out of an S14. Theres quite a few bits that want finishing off but the only one I need some assistance with is making the Speedo work? He told me something about fitting a resistor to it? I'm sure this is a common problem doing this engine swap, so any assistance and ideas would be much appreciated!:)
Cheers,
Alex
It doesnt work at all or it's not correct. If it works, but points wrong speed values, indeed your speed sensor is from the s14 (i.e gearbox), which is different to the s13 ca18 sensor.
If it doesnt work, you'll need to double check the connections in the transmission harness if they go to the ECU and then to the dash via plugs M47 and M48, and the dash plug F1/M53. This might be tedious...
BUMP!
Having done some chasing under the car, there are no wires heading to the speed sensor and there isnt a connector on the speed sensor... Can i just hardwire from the speed sensor direct onto the back of the cluster unit??