Printable View
I have searched but can't find exactly what I'm looking for.
I have a PowerFC, I've connected it up to my car and it powers on but not tried anything beyond that, id like to see if it works correctly
I'm looking for a set of parameters/settings (and where to find and adjust them) that I can apply to a PowerFC to see if it'll work with my car and run/idle properly.
Its an S15 with 555cc and a Z32 AFM
I'm sorry if this has been covered like millions of times....
Should be enough to just set injectors to 0.8 and select Z32 from the AFM list.
Superstar thank you
It's option 4 for the AFM - 80,VG30 and I think you might need to do 80 rather than 0.8 for the injectors
duly noted, thank youQuote:
Originally Posted by Actual_Ben_Taylor
Sorry for being this post back.
I had a chance to throw the ecu into my car, I set everything as instructed but it won’t start, it cranks but that it.
Should there be a map on it? Or have I missed something else?
I set ink 1-4 to 80.0%, set Maf to 4
I did see somewhere about turning boost control off then on again?
I have an apexi Avcr already plumbed in.
Not sure how the boost control would stop the engine from firing up
Any other suggestions?