Hi all
Failed the test today on a high lambda reading.
Got a 1.31 when the spec is max 1.03
My hc was only 4ppm and the Co was 0.01
Any ideas?
Thanks
Printable View
Hi all
Failed the test today on a high lambda reading.
Got a 1.31 when the spec is max 1.03
My hc was only 4ppm and the Co was 0.01
Any ideas?
Thanks
Hi James. I’ve had this in the past and I think it’s down to exhaust bore size. This is made worse if the probe isn’t pushed far enough into the system or the car isn’t revved enough during the test. You could suggest they cover up part of the exit pipe (or fit a bung).
I am having emissions problems of my own at the moment. In for a retest on Saturday. Good luck with yours.
get the car proper hot before you take it to be tested.
Right so got a bung for the exhaust to tighten the bore made no difference. Also took off the cat and exhaust pasted all the seals and nothin. Lambda sensor goosed??
Right so got a bung for the exhaust to tighten the bore made no difference. Also took off the cat and exhaust pasted all the seals and nothin. Lambda sensor goosed??