Time to admit defeat. Have owned since 2005, had a small bump Sept 2013. Always my intention to build into Fast road car, but I knacked my back a few years ago and now my knee has gone. Just want everything gone now, move on with life.
1994 S13 on rotisserie. Was involved in light front end bump, Squashed headlight housing down and bent top of N/S inner wing. New Nissan front end (cross member, uprights and slam panel) . In the process of the few bits of rust repair (mostly done) and some shell strengthening. Rotisserie included.
Have everything apart from: Windscreen, Rear seat, Bonnet hinges, some Hot side FMIC pipework. Messed up rear windows taking them out, but have them. Have front wings, but they are horrible, bought just to make sure repairs were good.
What it looked like
http://i555.photobucket.com/albums/j...ps46640397.jpg
https://i555.photobucket.com/albums/...psfcdfe40a.jpg
New front crossmember
Engine was rebuilt after Flexhoning, new rings, oil and water pumps, all new gaskets, Cometic metal head gasket. Head had some mild inlet porting and more excessive exhaust porting. Completed app. 2400 miles. Has sat for 5 years, but turns over fine. GT2560R (T28R) bought new from TD, done app. 1800 miles. Apex large downpipe and “Sensible” twin exit exhaust.
New parts
FMIC
S14 Roll centre correction balljoints
Front and rear Lower Arm bushes
Full set CA18 engine hoses.
Parts
Apex/BC 5/4 Comfy coilovers
Fibreglass Rear tailgate with Lexan screen
Set of R33 Wheels with Dunlop Sport Maxx 225/45 and 255/40
Set of F+R S13 Hardrace bushed Alignment arms
Godspeed F+R Anti roll bars
R32 Rear brakes
Set of Wiseco pistons and forged rods
Pair of Z32/R32?? Ali hub carriers
S14 Lower arms
S14 Hubs (rears already on subframe)
S14 four pot calipers and discs
50mm Ali Radiator
R32 rear ARB
Was running HDev Stage 2, have Nistune Stage 3 ECU and Z32 MAF and 444 cc Injectors
2 Spare CA18s in bits
2 spare gearboxes
Spare wiring loom
Pair of S14 wheels, pair of 4 x 114.5 7 x 15 Pro race 1.2s
£2200
Car is in Worksop, Notts. Car can be put on subframes, rear is built up and front won’t take long. Two people can take it off rottiserie, I can’t be one of them.
Will sort photos if required
