Loving it! Will handle so well!
Printable View
Loving it! Will handle so well!
That's the idea! I haven't increased the power too much, want it handling and braking really well first. Looking at getting some dba rear discs now, new pads,and a fluid change,
Oh and braided line just for the front..rears been done.
I need to source new brake lines. As mine were getting pretty worn out now.
Only the ones running to the rears.
The copper ones? Andy replaced them for me when he did the subframe as they wouldn't have passed the mot next year.
http://i208.photobucket.com/albums/b...pshuw9u0yq.jpg
All painted and ready to go on.. Whitleine front arb.
Updated list..
Current mods,
Engine: -
Apexi air filer
NGK colder spark plugs
HKS bov
Gizmo boost controller
Japspeed front mount intercooler
3' front pipe
Decat
Japspeed 3' exhaust
Catch can and breather
Japspeed 52mm alu radiator
Silicon hoses and mikalor clamps
H-Dev stage 2a chip
Deatschwerks DW300 fuel pump
Oil filter relolation kit and 19 row oil cooler
Chassis: -
Superflex poly bushed sub frame
Hubs and back end from an R33 and handbrake.
Hard race rear camber arms
Hard race subframe brace
Standard front tension arms with Superflex camber adjustable bushes.
Superflex power steering rack bushes
Superflex rear arm bushes
R33 gtr rear anti roll bar with Superflex bushes and drop links.
Super pro front anti roll bar bushes and drop links.
Japspeed short shifter
EPR tow straps
BC coil overs BR series, custom setup.
Ultra racing lower front brace
Ultra racing 4 point lower brace.
Exterior: -
17' crazy purple wheels! (To be changed)
S14A rear lights
Clear side repeaters
Front bumper cut to suit larger front mount.
Rear spoiler removed by previous owner
Ganador style wing mirrors
Rear wiper removed
Kouki front grill
Interior: -
Deep dish steering wheel
HKB boss
Driftworks handbrake button
Carbon gearknob
Defi boost gauge
Defi oil temp gauge
Defi water temp gauge, with GK tech water temp sensor plate.
Fitted these today.. The oil cooler was a really tight fit, I had to adjust the bracket 3 times so that the front bumper fit back on.
http://i208.photobucket.com/albums/b...psm9kf4crz.jpg
http://i208.photobucket.com/albums/b...pswnntvahi.jpg
Thinking of getting some of them braces for mine, how they sit on car? Do they sit lower than subframe
My new gauges, loving them, all wired bar the sensors, having a forged engine put in, in a few weeks, and an ACT 6 puck sprung clutch and new turbo. So wil wire the sensors when the new engine goes in.
http://i208.photobucket.com/albums/b...psf6rqydtq.jpg
Looks like an amazing spec! keep up the hard work!
Is that a gimo boost conrtoller ontop of your steering wheel in that last pic?
New turbo going on soon... It's a got a billet comp wheel for faster spool, and a 3' anti surge comp housing too, fits in place of the standard too, I can't wait, rated to 480bhp
http://i208.photobucket.com/albums/b...pskqnrazot.jpg
http://i208.photobucket.com/albums/b...psa3x4yish.jpg
http://i208.photobucket.com/albums/b...psy2vzyfth.jpg
Braided clutch line fitted, damper loop removed, weight saving.. ����
http://i208.photobucket.com/albums/b...psvn0b4iil.jpg
Underbody shot of the Ultra racing braces and Whiteline arb, worth every penny!
http://i208.photobucket.com/albums/b...psvrjx1qsv.jpg
New forged engine fitted..
http://i208.photobucket.com/albums/b...psnbixo8wh.jpg
New Kinguwa turbo installed,
http://i208.photobucket.com/albums/b...pspcm2ddxf.jpg
Just ordered a set of Nakang ns2-r for s14, ready for the track day at the end of the month. .mapping at H-dev at the end of the month too, I'm like a kid at Christmas!
Double post.