Propshaft Question

I am starting a spec s to sr20det conversion

Can anyone tell me if the spec s prop is ok. Obviously it will fit as im using the spec s gearbox just not sure if its different to the s14 prop

Thanks

Pretty sure ours just has a s14 sr20det front half prop with the s15 rear but not 100 percent it was a while ago now nut I have a rear s14 prop on the shelf so im guessing it was the other half used.

Spec S has a smaller diameter prop than S14 and Spec R.

Im going to gomand have a look under it arent I.

Thanks, will it handle a sr20det worst case I suppose I could have Dr prop beef it up a bit

What gearbox you going to use? The spec s 5 speed. If so the prop will be fine

The misses spec s has a s14a diff with different diff back plate(aftermarket colling plate?)

Still pretty sure its justa standard s14a sr20det prop

It's pretty weedy, having said that mine has held up fine after 2 years of abuse with 290lbft at the motor.

OK thanks for the replies I'll go with the standard for now as will be near standard to start off with