As low as £99! 2 week manifold offer!!

HI SXOC :sxoc:

We thought it was time to once again offer you our FAST selling manifolds to you for a super low price!!

This offer is for a LIMITED TIME ONLY so do not miss out!!
( Offer Ends on Monday 2nd September 2013 )


Our high quality stainless steel manifolds will replace the standard cast iron unit.
Our Manifolds are CAD designed for optimum gas flow, and allow exhaust gasses to exit the turbo faster, therefore speeding up spool up time and reducing turbo lag.
These are extremely high quality and we have them at a great price for you!

Below I have listed each manifold and included a picture and there features along with the 2 week offer price!!! DO NOT MISS OUT ON THIS OFFER!!!

Nissan SR20DET Tubular Manifold

http://i709.photobucket.com/albums/w.../_DSC91422.jpg

http://i709.photobucket.com/albums/w.../_DSC91482.jpg

http://i709.photobucket.com/albums/w.../_DSC91522.jpg

http://i709.photobucket.com/albums/w.../_DSC91492.jpg

Features:

* High quality grade T304 stainless steel manifold.
* 3mm thick, mandrel bent, polished stainless steel.
* Fully TIG welded.
* Huge weight reduction, weighs only 3.8 Kgs.
* Significantly increases torque and BHP over the entire RPM range.
* Improves throttle response and improves exhaust gas flow.
* Direct bolt-on replacement.
* Gaskets included.

Fits S13, S14, S14a, S15 with SR20DET engine.

These are advertised on our website for £149.00

The best bit is we can provide these to you guys as part of our 2 week offer for £99.00 delivered to your door.


Next up is our Nissan SR20DET SPEC T Manifold

http://i709.photobucket.com/albums/w...ds/00012-4.jpg

http://i709.photobucket.com/albums/w.../_DSC29492.jpg

http://i709.photobucket.com/albums/w...ds/00032-2.jpg

http://i709.photobucket.com/albums/w...s/DSC_2440.jpg

The Equal length of the Spec T manifold allows an improved flow of gasses Further improving the up spool up time and reducing turbo lag.
Again this item is manufactured from quality stainless steel and is a direct replacement for the standard cast iron unit.

Features:

* High quality grade T304 stainless steel manifold.
* 3mm thick, mandrel bent, polished stainless steel.
* Fully TIG welded.
* Huge weight reduction, weighs only 3.8 Kgs.
* Significantly increases torque and BHP over the entire RPM range.
* Improves throttle response and improves exhaust gas flow.
* Direct bolt-on replacement.

Fits S13, S14, S14a, SR20DET engine.

These are advertised on our website for £199.00

The best bit is we can provide these to you guys as part of our 2 week offer for £149.00 delivered to your door.

All these prices include VAT and delivery.[/B]

Remember this offer will be running Until Monday the 2nd of September So make sure you don't miss out!!

To get your hands on these all you need to do is call on 08450 212 312 to pay by debit card.
Or if you prefer you can send a paypal payment to sales@japspeed.co.uk with a note attached to the payment providing me with your contact details, shipping address and a note of the product you wish to order.


I look forward to getting a few of these out to you guys and look forward to hearing your feedback.

thanks

Paul :thumbs:

No ca fanimolds?

Quote:

---

Originally Posted by MEL

No ca fanimolds?

---

PMSL!! That made me chuckle!

Sorry we do not produce a CA18DET manifold!

I sent you guys a payment through paypal for one at the weekend, hopefully you got it

Yep received your payment and the item should be with you tomorrow. :)

Bump to the top! Grab one before the offer ends ;)

BUMP TO THE TOP!!!

We thought it was time to once again offer you our FAST selling manifolds to you for a super low price!!

This offer is for a LIMITED TIME ONLY so do not miss out!!
( Offer Ends on Monday 2nd September 2013 )


Our high quality stainless steel manifolds will replace the standard cast iron unit.
Our Manifolds are CAD designed for optimum gas flow, and allow exhaust gasses to exit the turbo faster, therefore speeding up spool up time and reducing turbo lag.
These are extremely high quality and we have them at a great price for you!

Below I have listed each manifold and included a picture and there features along with the 2 week offer price!!! DO NOT MISS OUT ON THIS OFFER!!!

Nissan SR20DET Tubular Manifold

http://i709.photobucket.com/albums/w.../_DSC91422.jpg

http://i709.photobucket.com/albums/w.../_DSC91482.jpg

http://i709.photobucket.com/albums/w.../_DSC91522.jpg

http://i709.photobucket.com/albums/w.../_DSC91492.jpg

Features:

* High quality grade T304 stainless steel manifold.
* 3mm thick, mandrel bent, polished stainless steel.
* Fully TIG welded.
* Huge weight reduction, weighs only 3.8 Kgs.
* Significantly increases torque and BHP over the entire RPM range.
* Improves throttle response and improves exhaust gas flow.
* Direct bolt-on replacement.
* Gaskets included.

Fits S13, S14, S14a, S15 with SR20DET engine.

These are advertised on our website for £149.00

The best bit is we can provide these to you guys as part of our 2 week offer for £99.00 delivered to your door.


Next up is our Nissan SR20DET SPEC T Manifold

http://i709.photobucket.com/albums/w...ds/00012-4.jpg

http://i709.photobucket.com/albums/w.../_DSC29492.jpg

http://i709.photobucket.com/albums/w...ds/00032-2.jpg

http://i709.photobucket.com/albums/w...s/DSC_2440.jpg

The Equal length of the Spec T manifold allows an improved flow of gasses Further improving the up spool up time and reducing turbo lag.
Again this item is manufactured from quality stainless steel and is a direct replacement for the standard cast iron unit.

Features:

* High quality grade T304 stainless steel manifold.
* 3mm thick, mandrel bent, polished stainless steel.
* Fully TIG welded.
* Huge weight reduction, weighs only 3.8 Kgs.
* Significantly increases torque and BHP over the entire RPM range.
* Improves throttle response and improves exhaust gas flow.
* Direct bolt-on replacement.

Fits S13, S14, S14a, SR20DET engine.

These are advertised on our website for £199.00

The best bit is we can provide these to you guys as part of our 2 week offer for £149.00 delivered to your door.

All these prices include VAT and delivery.[/B]

Remember this offer will be running Until Monday the 2nd of September So make sure you don't miss out!!

To get your hands on these all you need to do is call on 08444 489 080 to pay by debit card.
Or if you prefer you can send a paypal payment to sales@japspeed.co.uk with a note attached to the payment providing me with your contact details, shipping address and a note of the product you wish to order.


I look forward to getting a few of these out to you guys and look forward to hearing your feedback.

thanks

Paul :thumbs:

Bump to the top!

Sent a few of these out to you yesterday and you guys should be receiving them today! :)

Its a great offer and only available for 2 weeks so dont miss out!!!

Regards
Paul

If you are looking to place an order in time for the weekend then get in touch today by calling our sales team on 08444 489 080 or alternatively you can send a paypal payment providing us with your:

Full name
Shipping address
Contact number
Email address
& a note reminding us of the items you wish to order.

We can then process your order at the first opportunity and have our dispatch team send the item for next day delivery!

If you have any questions then post them up, send a PM or call us on 08444 489 080 and our friendly staff will be happy to assist you.

Regards
Paul