3D printing components [SX specific] PLA / Green-Tec Pro

Hello, I have constructed a couple of 3D printing parts for my 200SX S13 and thought, maybe someone is interested in something like that.

Features Gauge Holder 3x52mm LHD/RHD:

- Space for 3x 52mm gauges
- Holding plate is firmly clamped / screwed to the dashboard
- Robust construction
- Weighs just under 70g
- Material (PLA in black) is easy to paint
- Thanks to the conical design, the displays sit very securely in the housing
- Gauges are inclined 20 ° to the driver for optimal reading
- high accuracy of fit
- came with installation guide (via .pdf)

Pictures:

https://s19.directupload.net/images/191216/zun7ssum.jpg

https://s19.directupload.net/images/191216/ddkladai.jpg

https://s19.directupload.net/images/191208/npwlapuh.jpg

https://s19.directupload.net/images/191208/nuf23quv.jpg

https://s19.directupload.net/images/191208/5eryrxur.jpg

https://s19.directupload.net/images/191211/z35ihzxy.jpg

https://s19.directupload.net/images/191211/ijo39m6k.jpg

Asking price: 35€ + postage and paypal-fees

Features cup holder V1 up to 67mm diameter LHD/RHD:

- fits perfectly for 67mm cans (330ml / 500ml) and 58mm cans (e.g. Cola) due to variable nose
- 250ml cans (53mm, like Redbull and Co) still hold their position reliably
- cup holder is securely clamped in position and does not wobble
- Robust construction
- Weighs just under 75g
- Material (PLA) is easy to paint
- high accuracy of fit
- came with installation guide (via .pdf)

Pictures:

https://s19.directupload.net/images/191211/2gjmjw3m.jpg

https://s19.directupload.net/images/191211/3xybnvzh.jpg

https://s19.directupload.net/images/191211/ltte6pqc.jpg

https://s19.directupload.net/images/191211/he6f5xbs.jpg

https://s19.directupload.net/images/191211/66k9tq7d.jpg

https://s19.directupload.net/images/191211/6rxikdoy.jpg

https://s19.directupload.net/images/191211/oti66nzi.jpg

https://s19.directupload.net/images/191211/i96x5hac.jpg

Asking price: 40€ + postage and paypal-fees

Features Audi R8 ignition coil adapter:

- Gives the Audi R8 ignition coils a secure and firm hold
- Robust construction
- Weighs only 30g per ignition coil
- Material (Green-Tec Pro) is very temperature stable (up to 160 ° C)
- high accuracy of fit
- Material does not transmit temperature to the ignition coils as strongly as e.g. Aluminum or steel
- fit CA18/RB25/RB26
- came with installation guide (via .pdf)

Pictures:

https://s19.directupload.net/images/191224/wuaaeezi.jpg

https://s19.directupload.net/images/191224/dmsn493c.jpg

https://s19.directupload.net/images/191224/e9y4ew2w.jpg

https://s19.directupload.net/images/191224/8mzjbhx5.jpg

https://s19.directupload.net/images/191224/coljgtuv.jpg

https://s19.directupload.net/images/191224/nzcf3lft.jpg

Asking price: 40€ + postage and paypal-fees

Best Regards, ludi

I'd be interested in the STLs.

Nice! Mind me asking what 3D printer setup you're using?

Quote:

---

Originally Posted by stoofer

I'd be interested in the STLs.

---

I'm not sure that would be for sale.

Quote:

---

Originally Posted by stoofer

I'd be interested in the STLs.

---

Hey, I will not share the STLs.

Quote:

---

Originally Posted by LukeShepp

Nice! Mind me asking what 3D printer setup you're using?

---

What you want to know? I use normal settings for PLA. :)

Best Regards, ludi

Quote:

---

Originally Posted by ludi

What you want to know? I use normal settings for PLA. :)

---

What printer is it that you're using? Looking at getting one but not sure what what to go with, too many choices [emoji23]

Sent from my SM-G960F using Tapatalk

Quote:

---

Originally Posted by LukeShepp

What printer is it that you're using? Looking at getting one but not sure what what to go with, too many choices [emoji23]

Sent from my SM-G960F using Tapatalk

---

I have a Creality CR-10 and I´m really happy.

Best Regards, ludi

Features Audi R8 ignition coil adapter for SR20:

- Gives the Audi R8 ignition coils a tight fit
- Robust construction
- Weighs only 20g per ignition coil adapter
- Material (Green-Tec Pro) is very temperature stable (up to 160 °C)
- high accuracy of fit
- Material does not transmit temperature to the ignition coils as strongly as e.g. Aluminum or steel

Pictures:

https://s19.directupload.net/images/200119/kja4mugx.jpg

https://s19.directupload.net/images/200119/jrzzm6sf.jpg

https://s19.directupload.net/images/200119/t5gx25ab.jpg

https://s19.directupload.net/images/200119/tcn8yqee.jpg

https://s19.directupload.net/images/200119/fap9wlcx.jpg

Adapter mounted:

https://s19.directupload.net/images/200119/c62yzb6a.jpg

https://s19.directupload.net/images/200119/k74wyyeb.jpg

https://s19.directupload.net/images/200119/oshl9yoe.jpg

https://s19.directupload.net/images/200119/sf2h7im7.jpg

https://s19.directupload.net/images/200119/ey6rocza.jpg


Asking Price: 40€ + postage and paypal-fees.

Best Regards, ludi

Quote:

---

Originally Posted by LukeShepp

What printer is it that you're using? Looking at getting one but not sure what what to go with, too many choices [emoji23]

Sent from my SM-G960F using Tapatalk

---

I have a MonoPrice Voxel - It is great too and cheap. Although, small build plate (150mm ^3)

Is there room for the loom to plug into the R8 coils with them fixed like that? Interested if this can be confirmed

Quote:

---

Originally Posted by Sean-B

Is there room for the loom to plug into the R8 coils with them fixed like that? Interested if this can be confirmed

---

https://s19.directupload.net/images/200125/9nu8alpy.jpg

I think it is the typical position for the R8 Coil swap. The same direction as the OEM ones ... :nod:

Best Regards, ludi

Do you do a 3x52mm gauge holder for an s14a?

Quote:

---

Originally Posted by Gazmondo

Do you do a 3x52mm gauge holder for an s14a?

---

At the moment not, but I can have a look for a solution.

Best Regards, ludi

Great quality gauge holder. I love it.

Thanks

Quote:

---

Originally Posted by acs

Great quality gauge holder. I love it.

Thanks

---

Hey, big thanks for your positiv feedback! And nice to hear, that all goes well with the shipping to your countrie. Was the first time to send something to Jersey. :)

Best Regards, ludi

could you contact me via DM ? email of facebook link so we can have a chat

Nice quality and smart easy to use installation. In my opinion it needs no painting as the surface finish is so good.

https://i.ibb.co/2ZCx9f5/Screenshot-...49-Gallery.jpg

Warning:

Car dashboards can hit over 69 C after being parked in the sun on a hot day for only an hour ( https://www.livescience.com/62651-how-hot-cars-get.html https://www.sciencedaily.com/release...0524081730.htm ). The glass transition temperature of PLA is between 60-65C - this is the point the plastic starts to go soft and can bend and deform.

PLA is a bad material choice for this application.

Quote:

---

Originally Posted by stoofer

Warning:

Car dashboards can hit over 69 C after being parked in the sun on a hot day for only an hour ( https://www.livescience.com/62651-how-hot-cars-get.html https://www.sciencedaily.com/release...0524081730.htm ). The glass transition temperature of PLA is between 60-65C - this is the point the plastic starts to go soft and can bend and deform.

PLA is a bad material choice for this application.

---

You are right. I have been using GreenTec Pro for a very long time now:

https://www.extrudr.com/en/products/...-schwarz_2284/

If anyone gets problem with a product of mine with PLA, please contact me! There is a free replacement from Greentec Pro.

Best Regards, ludi

I made my own rings for the R8 coils ages ago on the printer at work using PLA. Been on there for months including track days with no sign of deterioration :). Not sure what the temp is there to be honest, but it’s far from cold.


Sent from my iPhone using Tapatalk