Cheers mate, taking some time but getting there now :)
Printable View
Right.. Other side is now completed just got to seal it up.
http://i1365.photobucket.com/albums/...psiz28ddn9.jpg
Managed to acctually get some 'decent' welds to say it's a cheap welder and I'm far from a welder lol
http://i1365.photobucket.com/albums/...ps1btrdid6.jpg
http://i1365.photobucket.com/albums/...psv0i08rur.jpg
Underside of arch
http://i1365.photobucket.com/albums/...psiscn73o3.jpg
Also been distracted most of today with another side project. Same friend with stage 3 s14 decided at Christmas to buy some new wheel, which required much wider arches :facepalm: so today was further proof that with limited knowledge and experience and the age old blokes moto of 'ahh **** it, it'll be rate' we took an angle grinder to a fairly clean shell :smash: here's how that went
http://i1365.photobucket.com/albums/...psw2v7dsna.jpg
http://i1365.photobucket.com/albums/...pstsatizul.jpg
http://i1365.photobucket.com/albums/...psz2qxlg65.jpg
His new wheels are gorgeous to be honest though, worth the effort.
Started me looking for wheel for mine, feeling these rota mxr's it white with chrome lip.
http://i1365.photobucket.com/albums/...psmcvtitpb.jpg
But might be a while yet before I need them lol :whip:
Been a while again but been back on it with this again, seems to go in fits and starts the motivation for this car :facepalm: The stalling point this time was her indoors wanted a wedding so that was that :smash: not moved on much to look at but its took some effort. I've painted the engine bay finally, took about 4-5 coats of paint to cover the grey primer. Then banged about 3-4 coats of lacquer to try and make it look presentable. Not the best of jobs but i've got a time line to get car out the garage its in and upto my garage so just got it done :indiff:
I then realised i'd not undersealed drives front arch after painting bay :facepalm: :o so ive masked the crap out of it and hope its not gonna seep through :cry: I've also sprayed the brake servo cos i couldn't bring myself to put a rust faded servo back in a freshly painted bay :D
Next jobs are get both subframes blasted and powder coated, so anyone know anyone good in chesterfield area let me know. Then its good to move and when its in my garage jobs are run all new brake lines in copper, and i want to run a swirl pot in boot with and external pump with ptfe braided lines running through car so any advice on routes, sizes and lengths i'll roughly need would be much appreciated. I've got a sheet of ali aswell to make a firewall to seal boot off.
Here's a few pictures of the bay now
http://i1365.photobucket.com/albums/...psp7y8ricl.jpg
http://i1365.photobucket.com/albums/...psct87gogc.jpg
http://i1365.photobucket.com/albums/...psgtfrtzov.jpg
http://i1365.photobucket.com/albums/...ps9aa6zre2.jpg
Seeing as photobucket has died thought I’d bang some images up of the car as it sits now as it’s abit further on aswell. Slowly but surely 🙈😂
A before and after of the bay
https://www.flickr.com/gp/154245580@N07/R1p367
Few more of the bay with the modified subframe and all powder coated
https://www.flickr.com/gp/154245580@N07/v80f05
https://www.flickr.com/gp/154245580@N07/Y2e716
https://www.flickr.com/gp/154245580@N07/00U5j5
https://www.flickr.com/gp/154245580@N07/488020
Rear subframe getting bushes removed and solid bushes fitted after powder coating
https://www.flickr.com/gp/154245580@N07/709v7P
https://www.flickr.com/gp/154245580@N07/27D18d
https://www.flickr.com/gp/154245580@N07/Tp2G4g
https://www.flickr.com/gp/154245580@N07/ZZ2R0T
Donar car stripped of its heart
https://www.flickr.com/gp/154245580@N07/51NC37
Had to try my painted rocker 😁
https://www.flickr.com/gp/154245580@N07/bK5p8v
Bucket seat mounted (the welding burns on floor have since been cleaned and painted 🙈😂)
https://www.flickr.com/gp/154245580@N07/Kotf7T
Sat the front end on just so it looks like a car for the first time 😂
https://www.flickr.com/gp/154245580@N07/Pf2507
And finally today took the hot side off the engine and started cleaning
https://www.flickr.com/gp/154245580@N07/uW3smh
Hoping forums haven’t died off too much with facecrap etc as up to yet I’m struggling to get any info on the next big job. Stripping the loom down and removing abs, ac and anything else I don’t need. Then relocating the fusebox to behind glove box. The relocation is fairly simple just mark cut and extend,it’s removing bits I’m struggling with. Anyway cheers for looking might have some more in another 6 months 😂
Apparently Flickr hasn’t worked either ffs
Thought id try and have another go at uploading some more photos of the build so far...
Some more of the bay and all the powder coated subframes.
https://i1365.photobucket.com/albums...psyjcquqwr.jpg
http://i1365.photobucket.com/albums/...psprkpepwu.jpg
http://i1365.photobucket.com/albums/...ps4lezt3k4.jpg
http://i1365.photobucket.com/albums/...ps4lezt3k4.jpg
http://i1365.photobucket.com/albums/...ps6z3eks9y.jpg
http://i1365.photobucket.com/albums/...psdprzeytc.jpg
http://i1365.photobucket.com/albums/...psaqoslkjc.jpg
http://i1365.photobucket.com/albums/...pse0oylvvm.jpg
Also made a start on cleaning my engine up
http://i1365.photobucket.com/albums/...psqehzblf7.jpg
http://i1365.photobucket.com/albums/...ps3sjdhir5.jpg
Also cars now in my garage with the engine
https://i1365.photobucket.com/albums...spopvoc52.jpeg