JohnD76
20-08-2001, 13:18
Have recevied my Ecotok valve and want to fit it, just don't quite know which is the Brake servo vacuum hose on the S14a.
Anyone any ideas?
"The same Ecotek CB-26P fits almost all petrol engine cars and uses the vacuum created in the inlet manifold to cause turbulence in the fuel air mixture.
It needs to be fitted so that it can allow small quantities of turbulent air into the manifold. This is normally accomplished by fitting it to the vacuum servo hose from the brake servo or to a breather hose from the plenum chamber or the manifold."
Thanks,
------------------
John (S14a)
Blitz Nur Spec R, SUS, MSTT, Dump Valve.
TC in box and EcoTek CB26P enroute.
Currently investigating De-Cat pipe too :)
222.8hp @ 6062 RPM
206.2lb ft @ 4755 RRM
http://mysmilies.com/s.php?archive=contrib/owen&rand=show
Anyone any ideas?
"The same Ecotek CB-26P fits almost all petrol engine cars and uses the vacuum created in the inlet manifold to cause turbulence in the fuel air mixture.
It needs to be fitted so that it can allow small quantities of turbulent air into the manifold. This is normally accomplished by fitting it to the vacuum servo hose from the brake servo or to a breather hose from the plenum chamber or the manifold."
Thanks,
------------------
John (S14a)
Blitz Nur Spec R, SUS, MSTT, Dump Valve.
TC in box and EcoTek CB26P enroute.
Currently investigating De-Cat pipe too :)
222.8hp @ 6062 RPM
206.2lb ft @ 4755 RRM
http://mysmilies.com/s.php?archive=contrib/owen&rand=show