View Full Version : Turbo/Cylinder Head
Mike Dagg
04-06-2001, 14:04
Anyone had a turbo reconditioned/bearing s repalced recently? How much did it cost? I don't really want to pay £450 for getting it re-conned. Also, on the off-chance, any idea how much it should cost to get a valve replaced?
Cheers
Mike
Actual_Ben_Taylor
04-06-2001, 22:12
I paid about 300 for a full rebuild on my T25 (removed and refitted myself).
Ben
------------------
http://forums.evilnet.net/ubb/smilies/pc1.gif
Black '98 S14
my heads in an acid bath as we speak (cylinder head that is), took it off this weekend thinking i had badly seating valves, nightmare job compared to my birds corsa sri i did the week before, only to find that it needs rings aswell, thankfully should get away without needing to rebore it though.
anyway i've got a ballpark figue of around £180 to replace two valves, stem seals, etc. through a mate, so i'd say add vat to that for a rough guide
by the way that includes head gasket/bolts/replacement oil and filter, unless he has to go direct to nissan in which case it may be a little dearer
[This message has been edited by A8-RICK (edited 05-06-2001).]
The valves themselves are about £15+vat each.
Matt
Mike Dagg
05-06-2001, 09:38
Thanks guys - as ever, very helpful on this forum.
Mike
depending on how confident you are at stripping things down. You could rebuild the turbo yourself for peanuts. The urls below has a list price for a t3 rebuild kit for $129 obviously shipping will add to it.
http://www.turbos.com/prod04.htm http://www.turbos.com/breakdown.htm
Just a thought.
------------------
Dan
Red S13
or you could get the adapter kit bits and bobs (about £200) and drop lucky on a cheap T3 and kill two birds with one stone. Nifty turbo and a kick in the back as you put your foot down. http://300zx.co.uk/200sx/ubb/cool.gif
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.