PDA

View Full Version : Mazworx SR20 Oil Block Adapter


MazworxRacing
09-03-2010, 19:41
http://mazworx.com/pics/30000_sm.jpg

http://mazworx.com/pics/30000_1_sm.jpg

Factory OEM oil block tends to break and lose oil pressure which can lead to devestating engine failure. This can also be used for external oil coolers or oil filter relocation. You can utilize your factory oil pressure sensor and additional port for aftermarket gauge or whatever you may want to put to it.

Made from 6061-T6 billet aluminum. CNC Machined. Comes with:

(2) -10an ORB Fittings

(2) 1/8" NPT Oil port plugs

(2) O-rings

(1) Oil block adapter

215.00USD shipped!
MazworxRacing
10-03-2010, 14:29
PMs replied Thanks!
MazworxRacing
19-03-2010, 14:30
Pm's replied Thanks!
BBB
19-03-2010, 14:36
Hi there. Can you fit this with the engine in place? And do you have to remove any other OEM feed pipes to fit it (water for example)?
MazworxRacing
19-03-2010, 15:11
Yes it can be fitted with the engine in the car. Just take the factory oil filter/block adapter off and replace it with this one. Pretty simple and straight forward.
BBB
19-03-2010, 15:21
Sorry if I'm being a bit thick here, but what happens to the oil cooler water pipes and the oil pressure relief valve?
MazworxRacing
19-03-2010, 15:48
You would run an external oil cooler.
DeanS15
19-03-2010, 16:19
is there even any benefit to having the s14 oil cooler thats built into the filter housing? on the s15 nissan didnt even bother to fit it and that was on a slightly more tuned sr.......

cant see the point of the stock cooler myself - do away with it:nod:
ex-ctr
19-03-2010, 17:19
Sorry if I'm being a bit thick here, but what happens to the oil cooler water pipes and the oil pressure relief valve?

dump the cooler and fit a proper cooler with remote filter :nod: makes changing the filter so much easier, and its a much cleaner install than a sandwich plate type oil-cooler and much less likely to leak:nod:
BBB
19-03-2010, 18:01
dump the cooler and fit a proper cooler with remote filter :nod: makes changing the filter so much easier, and its a much cleaner install than a sandwich plate type oil-cooler and much less likely to leak:nod:

That's the reason I'm asking as that's exactly what I want to do. My question is probably better rephrased as - when I take the stock filter housing off, what do i do with the cooling hoses that are there, trace them back and plug them up ? And how easy is that to do with the engine in place?
ex-ctr
19-03-2010, 18:04
That's the reason I'm asking as that's exactly what I want to do. My question is probably better rephrased as - when I take the stock filter housing off, what do i do with the cooling hoses that are there, trace them back and plug them up ? And how easy is that to do with the engine in place?

put a joiner in the water lines, it can be done while the engines in the car, can be fiddly but worth it:nod:
BBB
19-03-2010, 18:11
put a joiner in the water lines, it can be done while the engines in the car, can be fiddly but worth it:nod:

Thanks :thumbs: May pick your brains on this later.
t51rjohn
23-03-2010, 16:09
pics not working for me, was going to buy an obx version of this but would prefer yours if i could see this
ex-ctr
23-03-2010, 16:18
pics not working for me, was going to buy an obx version of this but would prefer yours if i could see this

http://www.mazworx.com/index.php?l=product_detail&p=3152
MazworxRacing
23-03-2010, 17:12
Sorry pics fixed. Thanks ex-ctr!
MazworxRacing
29-04-2010, 20:43
PM's replied Thanks!
MazworxRacing
04-05-2010, 13:30
Pm's replied Thanks!
MazworxRacing
05-05-2010, 16:47
PMs replied Thanks!~






http://mazworx.com/pics/30000_sm.jpg

http://mazworx.com/pics/30000_1_sm.jpg

Factory OEM oil block tends to break and lose oil pressure which can lead to devestating engine failure. This can also be used for external oil coolers or oil filter relocation. You can utilize your factory oil pressure sensor and additional port for aftermarket gauge or whatever you may want to put to it.

Made from 6061-T6 billet aluminum. CNC Machined. Comes with:

(2) -10an ORB Fittings

(2) 1/8" NPT Oil port plugs

(2) O-rings

(1) Oil block adapter

215.00USD shipped!
MazworxRacing
07-05-2010, 15:13
PM's replied Thanks!
MazworxRacing
13-05-2010, 16:29
Pm's replied Thanks!



http://mazworx.com/pics/30000_sm.jpg

http://mazworx.com/pics/30000_1_sm.jpg

Factory OEM oil block tends to break and lose oil pressure which can lead to devestating engine failure. This can also be used for external oil coolers or oil filter relocation. You can utilize your factory oil pressure sensor and additional port for aftermarket gauge or whatever you may want to put to it.

Made from 6061-T6 billet aluminum. CNC Machined. Comes with:

(2) -10an ORB Fittings

(2) 1/8" NPT Oil port plugs

(2) O-rings

(1) Oil block adapter

215.00USD shipped!
t51rjohn
18-05-2010, 11:31
wanting to pay for this i have sent you an email, to your sales address
MazworxRacing
18-05-2010, 17:08
wanting to pay for this i have sent you an email, to your sales address

Email sent Thanks!
t51rjohn
15-06-2010, 15:09
trying to sort out price on your website but shipping is 150.50 on the site, wanna pay credit card as paypal playing up how else can i do it?

Thanks John
MazworxRacing
15-06-2010, 16:22
trying to sort out price on your website but shipping is 150.50 on the site, wanna pay credit card as paypal playing up how else can i do it?

Thanks John


Go ahead and order it from the site and check out with a credit card. We will manually adjust the shipping from this side.

Thanks!
t51rjohn
11-07-2010, 08:21
Order made, order number 291.

Thanks John
MazworxRacing
13-07-2010, 21:43
PM's replied Thanks!
t51rjohn
14-07-2010, 09:48
Item received, its awesome thanks for getting it here so fast, well packaged.

Great service guys!!

Thanks

John