PDA

View Full Version : Rota Torque Drift



Evilchap
17-07-2009, 16:40
Torque Drift
http://i1005.photobucket.com/albums/af175/rarerims/torque_drift_c_web.jpg

Available in the following fitments:
17x8
ET35 (4x114) - Bronze / Gunmetal / Silver / White
ET35 (5x114) - Bronze / Gunmetal / Silver / White
ET48 (5x114) - Bronze / Gunmetal / White

17x9
ET30 (4x114) - Bronze / Gunmetal / White
ET35 (5x114) - Bronze / Gunmetal / White

17x9.5
ET12 (5x114) - Bronze / Gunmetal / White
ET30 (5x114) - Bronze / White

18x8
ET35 (5x114) - Bronze / White
ET48 (5x114) - Bronze / Gunmetal / White

18x8.5
ET30 (5x114) - Bronze / White / Black with Red Lip
ET35 (5x114) - Bronze / Gunmetal

18x9.5
ET12 (5x114) - Bronze / White / Black / Gunmetal
ET30 (5x114) - Bronze / Chrome / White
ET35 (5x114) - Bronze / White

madAl
26-09-2009, 17:10
The 17x9 et35 fitment 5x114 what will the fit be like to a 200 sx in terms of them filling the arch without the need of spacers

Evilchap
26-09-2009, 18:00
I would suggest ET30 would be the best fit with standard arches :) ET35 will be ok... but is not the best. :)

mags200
16-11-2009, 18:19
Evil chap - im getting prices together for after xmas buy...

Can u give a price on
18x9.5
ET12 (5x114) - Bronze

posted

:thumbs:

martinbattye
16-11-2009, 18:30
pm me price on the 17x8 x2 and 17x9 x2 plz.. all in 4stud

Evilchap
16-11-2009, 23:59
All pricing is on the website chaps :)

Paid up members get 10% discount ;)

I'll look up specific prices tomorrow for you, but if you cant wait until then, have a browse of the site :thumbs:

mags200
17-11-2009, 07:56
Paid up members get 10% discount ;) :thumbs:

ill be a full memeber before i order.... actually ill be one by the end of the week cause i get paid :):thumbs:

markcro
11-12-2009, 21:08
What would be the best fit for standard arches/ suspension - 17/8/ ET35 ? I want to avoid spacers if possible. Cheers.

Evilchap
11-12-2009, 21:11
which car do you have? :-) you cant go far wrong with 17x9 et30 on most 200s :-)

markcro
11-12-2009, 21:22
which car do you have? :-) you cant go far wrong with 17x9 et30 on most 200s :-)

Yeah sorry, that would help! :) It's a S14a. I don't intend going mad as this is going to stay as a GT car- back road cruiser. So comfort versus performance is a balance that I want to keep. I was thinking of 225/45/17 tyres all around. A 9 inch rim would be a big wide for those?

She's on standard suspension, maybe down the line I might up grade to Nismo S-Tune but that would be ablout as far as I'd go with it.

rd200sx
18-12-2009, 17:19
cud u pm me a price on a white set,114x4 et 30 17x9 thanks

Evilchap
18-12-2009, 17:29
Will do :)

Real Mark D
01-01-2010, 23:25
whats the best fit for an s14 on coilies with standard arches, 18 inches, et30?
any advice appreciated
cheers
mark :)

Evilchap
06-01-2010, 12:30
18x9.5 ET30 would be easy mate... depending on which coilies you have ;)

Real Mark D
06-01-2010, 21:20
i have dw cs1's n camber arms as well. so no need for spacers? clearence ok i take it

Evilchap
06-01-2010, 22:17
Yes, it'll be fine :) I have put the same fitment wheels on many cars :)

Apex Gen 1s are just a bit more of a challenge, that's all :)

ClaneO
06-01-2010, 22:24
sorry for the Q, will these fit an S13?

Evilchap
06-01-2010, 22:50
You'd be better with 17s IMO, 17x9 4114 ET30 or ET25 would be a good bet.

But yes, you can have wheels that look exactly like these for an S13 :)

ross200sx
27-01-2010, 18:37
hi there lookin for some help not a clue about the best size to fit its an s14a lowered what would be the best 17" to fit ?? cheers

Evilchap
28-01-2010, 10:30
Depends on what fitment you would like... 17x9 or 17x9.5 ET30 or ET25 would be pretty ideal unless you want stretched tyres and/or rolled arches :)

Drop me a PM if you'd like any more details info :)

Real Mark D
29-01-2010, 18:56
18x9.5 ET30 would be easy mate... depending on which coilies you have ;)

right my payday is on the way and my shitty rx8 rims need replacing. can you pm me a members price for stated above in white, and what tyres would be needed to fit standard arches without any problems, i got some 225's lying around but iv been reading that it requires archwork or summit, so tyre advice wld be good ta :)

b16 nyk
31-01-2010, 21:27
What 17"dia width/offset would you suggest for a S15,lowered c50mm with standard,non rolled arches?
Was thinking 8"front et35,9"rear et35 with 225 and 235 rubber

Evilchap
01-02-2010, 11:02
right my payday is on the way and my shitty rx8 rims need replacing. can you pm me a members price for stated above in white, and what tyres would be needed to fit standard arches without any problems, i got some 225's lying around but iv been reading that it requires archwork or summit, so tyre advice wld be good ta :)

846 is members price now, prices just went up a little, full price is 940 :thumbs:

Exchange rates have been ruining us, so the small increase is in effect from 01/02/10


What 17"dia width/offset would you suggest for a S15,lowered c50mm with standard,non rolled arches?
Was thinking 8"front et35,9"rear et35 with 225 and 235 rubber

8" front ET35 would be easy fit, ET30 would also be fine, rear you could have ET30 is you went with the 225, 235 ET35 probably is best. That's pretty much what I have on my car :)

b16 nyk
01-02-2010, 21:36
Ah,didn't realise the Torque drift came in et30 on the 8x17

Would you have a set of these(8x17et30 and 9x17et35)in bronze in stock?

Evilchap
02-02-2010, 09:56
Both in stock mate :)

Evilchap
03-02-2010, 15:24
After a slight balls up by me, wheels b16 nyk now sorted :thumbs:

tomarse121
30-03-2010, 23:15
hey, was just woundering if 9.5 * 18. would fit on an s14a, and what tyres would fit best

sil80shwa
04-04-2010, 15:43
hi there. please could i have a price for torque drift in 4 stud (2 times 8x17 et35 and 2 times 9x17 et30, both in gunmetal)
i was thinking of going 9x17 on the front too but will they fit in standard arches ok??
could i have price for the set with tyres and price with no tyres. (also, do you have any seconds in these? if so, again, prices please)

many thanks
josh:thumbs:

Evilchap
06-04-2010, 16:37
hey, was just woundering if 9.5 * 18. would fit on an s14a, and what tyres would fit best

They will, but it will depend on whether you have coilovers, if you want stretched tyres, and how low your car is ;)

For an easier time of fitting, most people go with 225/40/18 tyres.


hi there. please could i have a price for torque drift in 4 stud (2 times 8x17 et35 and 2 times 9x17 et30, both in gunmetal)
i was thinking of going 9x17 on the front too but will they fit in standard arches ok??
could i have price for the set with tyres and price with no tyres. (also, do you have any seconds in these? if so, again, prices please)

many thanks
josh:thumbs:

Used wheels are all on the list, but I dont think we have a set like this in there.

That staggered setup is 645 + delivery new. Price with tyres will depend on which size you would like :)

sil80shwa
06-04-2010, 17:56
That staggered setup is 645 + delivery new. Price with tyres will depend on which size you would like :)

i know its cheeky, but is there any discount with sxoc membership?
what size tyres would you suggest for a stretched look (not too stretched mind)( i was thinking a 215/45 on the 9x17's and 205/45 on the 8's?, in which case, id just need the price for wheels including a pair of 215/45's please)

UPDATE- ORDERED!! turned up super quick! even come with wheel studs and spigot rings!! well happy with service, and the 9's look AMAZING with 215/ 45's on!!

THANKYOU VERY MUCH RARE RIMS, KEEP UP THE GREAT WORK!!

neil c
25-06-2010, 18:40
hi guys, do you do the torques in green like advertised on the potn website? 4 in size 17x9.5 et12? if so how much would they cost? oh and i'm a member too.

cheers, neil

Evilchap
28-06-2010, 10:52
We're out of green at the moment I am afraid :(

We are the distributor however, POTN are one of our dealers, so I am afraid they have no green either unless they're getting them refinished.

neil c
28-06-2010, 11:22
Ah ok no problem. Do you know when you're going to be getting any in or would I need to order some? I'm in no desperate need for a set so wouldn't mind waiting.

Thanks neil

Evilchap
28-06-2010, 11:30
We have no more on order at the moment, so they'll be a while, and you'd need to order them in order that we will actually get some in.

I'd count on about 2-3 months to be realistic :)

neil c
28-06-2010, 13:29
Ok cool, i'll ring tomorrow and order some. Thanks

DoonanS14A
07-07-2011, 19:25
Now then mate, ive been looking at these wheels and im not to hot with sizes and fitment. Im looking at stretched tyres over 17's on a staggered fitment. The car is going to be about 50mill low and will have a bit of camber on them, its an s14a. What would be best?

Cheers

Evilchap
07-07-2011, 20:34
Et12s are the way forwards :nod:

DoonanS14A
08-07-2011, 06:51
Ok mate and what kind of tyre for a little stretch??

Evilchap
14-07-2011, 10:40
225/40/18 are good for some stretch - they'd have to be Falken tyres though as they're the only company with enough imagination to give us the go-ahead to fit that tyre size on that wheel size :)