MazworxRacing
02-04-2009, 20:08
Why buy from us?
Unlike the other companies, we have the vehicles here to mock up the chassis correctly for almost to near perfect tight fitments.
Unlike other companies, we use the highest grade and thickest material for these parts to ensure safety.
Unlike other companies, we just dont hang you a bunch of bars and you figure out where they go and then half the time there not even correct so you have to cut and notch and have fitment issues. Why waste the time?
And unlike other companies, we specialize in S-Chassis's and cage fabrications.
We are proud to offer a easy to install u-weld roll bar kit for the S-Chassis. The roll bar will be SCCA and NHRA legal. Made from 1 3/4" x .120" wall DOM tubing.
The key here is that we will be offering these pre-notched so all you have to do is tack and weld. The main hoop will already have the harness bar and cross bar on it and will have all the plates and bars properly bent to fit in 1 shot unlike other cages.
For the 6 point roll bar, it will be 385.00USD + shipping.X-Brace in the rear is $100.00USD additional.
For 10 point cage, it will be 725.00USD which will include everything from the roll bar + rear x-brace, x-door bars, a pillar bars, and uprights. This is widely used in US from Formula D and other drift competitions.
Pictured here is a 6 point roll bar:
http://i597.photobucket.com/albums/tt51/mazworx/DSC02814.jpg
http://i597.photobucket.com/albums/tt51/mazworx/DSC02816.jpg
http://i597.photobucket.com/albums/tt51/mazworx/DSC02818.jpg
http://i597.photobucket.com/albums/tt51/mazworx/DSC02817.jpg
http://i597.photobucket.com/albums/tt51/mazworx/s14_rollbar.jpg
Full roll cage with uprights, a-pillar bars, harness bar, hoop, diagonal, rear bars, rear x-brace, x-door bars.
http://i597.photobucket.com/albums/tt51/mazworx/s13coupe_fmulad.jpg
Unlike the other companies, we have the vehicles here to mock up the chassis correctly for almost to near perfect tight fitments.
Unlike other companies, we use the highest grade and thickest material for these parts to ensure safety.
Unlike other companies, we just dont hang you a bunch of bars and you figure out where they go and then half the time there not even correct so you have to cut and notch and have fitment issues. Why waste the time?
And unlike other companies, we specialize in S-Chassis's and cage fabrications.
We are proud to offer a easy to install u-weld roll bar kit for the S-Chassis. The roll bar will be SCCA and NHRA legal. Made from 1 3/4" x .120" wall DOM tubing.
The key here is that we will be offering these pre-notched so all you have to do is tack and weld. The main hoop will already have the harness bar and cross bar on it and will have all the plates and bars properly bent to fit in 1 shot unlike other cages.
For the 6 point roll bar, it will be 385.00USD + shipping.X-Brace in the rear is $100.00USD additional.
For 10 point cage, it will be 725.00USD which will include everything from the roll bar + rear x-brace, x-door bars, a pillar bars, and uprights. This is widely used in US from Formula D and other drift competitions.
Pictured here is a 6 point roll bar:
http://i597.photobucket.com/albums/tt51/mazworx/DSC02814.jpg
http://i597.photobucket.com/albums/tt51/mazworx/DSC02816.jpg
http://i597.photobucket.com/albums/tt51/mazworx/DSC02818.jpg
http://i597.photobucket.com/albums/tt51/mazworx/DSC02817.jpg
http://i597.photobucket.com/albums/tt51/mazworx/s14_rollbar.jpg
Full roll cage with uprights, a-pillar bars, harness bar, hoop, diagonal, rear bars, rear x-brace, x-door bars.
http://i597.photobucket.com/albums/tt51/mazworx/s13coupe_fmulad.jpg