View Full Version : FINALLY!!! finished my project S14a
Well its taken 5 months longer than i thought but at last its up on the road and running.
Was ment to have it finished in april but the little finishing touches took so much longer.
Really pleased with the finished result.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/Copyofdone10.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/Copyofdone7.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/Copyofdone3.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/Copyofdone2.jpg
Just like to thank everyone who has comented and especially petrol :notworthy who started me off on this project after I saw his work, and helped me out with some things.
tokyo_black
10-08-2008, 19:56
Well done it looks great! Very unique as well, i'm not sure if i've seen an s14a in that style before :cool:
That looks awesome! I really like that!...
Ive been watchin this from the start and was looking forward to seeing the finished result and i gotta say it look awsome, it looks so clean and smooth i love it. top job :thumbs:
Chriscooke
10-08-2008, 20:04
Top work mate:smitten:
Fo shizzle ma wizzle, that looks the shiz nits :nod: Nice in straight words :thumbs:
Thanks again for the comments....
There's only one problem now.
I have got to start decorating the house I cant put it off anymore :cry:
I really really like that :smitten::smitten::smitten:
Fo shizzle ma wizzle, that looks the shiz nits :nod: Nice in straight words :thumbs:
Took the words right out of my mouth :nod:
Wow!! :smitten:
WOW that looks so nice. Same as me I have been watching your project from the start and I really have to say that, thats is amazing work. I really like it. Any you get any more pics up of the work done inside, under the bonnet, and some close ups of the arches and molding you have done.
That shows, that the rear number plate surround development guy at nissan....needs shot. And billed to have every s14a on the road smoothed out like above...lol
Lovely work
looks good .. did you use the solid ally crank pulley in the end ? if so..how is it ?
looks mint mate you got a spec list?
That shows, that the rear number plate surround development guy at nissan....needs shot. And billed to have every s14a on the road smoothed out like above...lol
Lovely work
and the Honda guy who did the early ITR s too
fantastic mate, well done :D
thats stunning mate, i recon would look even nicer with some zenki side skirts and rear spats.
got any engine and interior piccys for us:thumbs:
mushtafa
10-08-2008, 21:55
Looks very good mate :smitten:
But have you really finished?
Petrolhead
11-08-2008, 00:11
:smitten: any pics of the inside?
Very nice! :nod: :smitten:
--lorien--
11-08-2008, 10:14
wow, that looks fabulous mate :thumbs:
that's good. so many people go completley ott with stupid snow plow front ends and loads of 'cr@p' slapped on the side.
that almost looks 'factory' which is about the best thing you can say about a modded car.
nice work
dan mkii
11-08-2008, 18:06
:eek:looks fantastic mate!! want too see some interior pics thoe!!! and under the bonnet!!
Top Work!
Looks lovely!:thumbs:
barney rubble
11-08-2008, 18:32
god that looks good .any chance of some more photos? white looks wow:eek:
im not a fan of de-spoilered 200's generally, but..................
that is genuinly the nicest 200 ive seen :notworthy
and there are some nice ones about.
well done :thumbs:
geavesie
11-08-2008, 19:58
:eek:looks fantastic mate!! want too see some interior pics thoe!!! and under the bonnet!!
looks very nice mate and wot he said ^^^ :D
looks good .. did you use the solid ally crank pulley in the end ? if so..how is it ?
No I did not fit it in the end because it hit the oil pump cover, needs some more machining to fit. A job for the winter.
that's good. so many people go completley ott with stupid snow plow front ends and loads of 'cr@p' slapped on the side.
that almost looks 'factory' which is about the best thing you can say about a modded car.
nice work
I wanted to keep it as standard looking as I could ( apart from the bright white roll cage :eek: ) so that only people who knew the car would see it was flared. I was even going to fill in the front wing vents but ran out off time.
As requested pics off engine bay.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/enginedone2.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/enginedone1.jpg
and just a quick pic off how it looked when i got it.
http://i136.photobucket.com/albums/q168/nismo9/200sx%20project/back1106.jpg
I will take a few inside pics at the weekend.
Once agian thanks for the coments:sxoc:
looks mint mate you got a spec list?
As requested..
Technical Specification:
• Engine
• Block: -
• Arias Piston Kit
• Eagle H Beam Rods
• ARP Head Stud Kit
• Brian Crower Stage 2 Camshafts (IN 264 and EX 264)
• Brian Crower Uprated valve springs
• Cometic Metal Head Gasket 1.6mm
• Lightweight Aluminum Pulleys
• Lightweight Main Underdrive Pulley
• SARD 850cc Injectors
• Nismo Engine Mounts
• Fuel Pressure Regulator
• Walbro 255 Fuel Pump
• Uridium IK24 Spark Plugs
• Head ported and matched intake and exhaust
• Intake: -
• Front Mount Intercooler
• Custom 3” Pipe Work
• Bailey Dump Valve
• Z32 AFM
• Jetex 440Hp Rated Intake Kit
• Custom 65mm Ported Throttle Body
• Greddy Style Inlet Plenum Ported and Matched
• Custom Hot Pipe
• Intake Positioned In Inner Wing
• Outlet: -
• Turbo GT3076WG Ball bearing Turbo
• Forge Turbo Actuator
• Custom Pipe Work
• Braided Hoses
• Tubular Manifold
• Custom Turbo Elbow
• Custom Full 3" Bore Exhaust With Jetex Silencers
• Other: -
• Aluminium Radiator 50mm
• Apex Oil Catch Tank
• Carbon Canister Removed
• Electric Fan
• Drive Chain: -
• RPS 6 PUK Clutch
• Lightweight Flywheel
• Mazworx Short Shift
• Mazworx V32 Gearbox Conversion
• Single Piece Prop
• Nismo Gearbox Mount
• Suspension: -
• AGX Fully Adjustable Dampers
• Evo Lowered Spring Kit
• G-Force Rear Camber Arms
•
• Apex Subframe Locking Kit
• Custom Front Upper Strut Brace
• Goodspeed Front and Rear Uprated anti-roll bars
• Uprated Front and Rear Droplinks
• Wheels & Brakes
• Brakes: -
• 325mm Front Discs fitted with 3000 GTO calipers
• Wheels: -
• Rondal alloy wheels 9J front 10J rear with 235 and 255 tyres
• Electronics
• Apexi Power FC
• Apexi Commander
• Blitz DSBC Boost Controller
• Autometer 52mm Oil Pressure Gauge
• Autometer 52mm Boost Gauge
• Race logic traction control
• Interior
• 5 Point Roll Cage
• All sound proofing removed
• All rear components removed For Lightening
• Bucket seats
• 4 Point Sabelt Harnesses
• Exterior
• Clear Indicators
•
• Custom Front Bumper
• Custom Rear Bumper
• Custom GTR Front Splitter
• Chargespeed Front and Rear Flared Arches
• Nismo Badges
That looks fantastic, i love white :thumbs::thumbs::thumbs:
:eek: Wow :eek:
I remember reading your project topic and thinking that it would turn out great, but could never have imagined it to have turned out this well!
Hats off to you! :thumbs:
More pics please! :nod:
Love it mate, love it!!!! :smitten:
But its not finished, never is :D
Love it mate, love it!!!! :smitten:
But its not finished, never is :D
Well its finished till december when it comes off the road. Might paint wheel inside arches over the winter:furious: stop putting ideas in my head.
cool..is it all mapped? what sort of power?
Awesome machine. Definitely has its own style
Looks amazing :notworthy
Very subtle until you see the cage.
cool..is it all mapped? what sort of power?
No its not been mapped yet with the latest mods, It made 375 BHP last year at APT before i changed things.
Man thats looking HOT! the rear bumper is so good, and the whole car super duper lol! Been watching this one, a good project and puts me to shame lol! Spot on!
I like that alot:thumbs: Good Work Matey
This has got to be one of the best looking s14a's ive come across!
very very nice indeed!!!!
Its up for sale in the sale section. :thumbs:
SXI 3354
24-11-2008, 19:22
thats well nice sir , good job
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.