View Full Version : Let the blood sweat and tears begin again !!!!
Welcome back my friends to the show that never ends we're so glad you could attend, come inside come inside.
and here we find ourselves again at the start of yet another project thread i dont like typing much so this'll be mainly pictures and a few comments here and there so thanks for looking and let it begin :)
ive been started for about 3 weeks now and have stripped the sound deadening out the car, stripped the engine ready to lift, stripped the inner wings ready to re wrap and minimize the looms and relocate the fuse boxes, stripped the front end with the power braces and anti roll bar coming off so far to get painted.
I recieved my first boxes of goodies today from Apex Performance radiator and associated gubbins and a proper short shifter.
Pics so far
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0004.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0003.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0002.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0010.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0011.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0012.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0013.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0014.jpg
xborninthefight
06-03-2008, 18:36
Lol thats funny just been doin the some thing as you for the past few days.:D
How are you going with taking off the rest of the shit thats left from the sound deadening
what stuff mate mines has came off pretty cleanly i just left it open to 'chill' overnight in scottish countryside then went at it first thing in the morning with a claw hammer and paint scraper (same method we used on a mates mini) gently tapping it to break its seal to the floor then if i couldnt get my finger under used the paint scraper to lift it no mess and easy to lift it all :)
xborninthefight
06-03-2008, 18:44
Your so lucky, ive got lots of shit left over and its goin to take ages to come off, Ive spent about good 6-7hours of just taking it off, (was taking my time though:))
i was about that for mine all done lol
xborninthefight
06-03-2008, 18:47
But ive still got all the little shitty bits to do :(:cry:
Your so lucky, ive got lots of shit left over and its goin to take ages to come off, Ive spent about good 6-7hours of just taking it off, (was taking my time though:))
White spirits works. A bit messy though.:thumbs:
Fake Ben Taylor
07-03-2008, 06:11
towel soaked in petrol worked great for me :)
did a bit more tonight finally stripped all of the loom wrapping on the passenger side. I've mainly done this because when my turbo gaskets blew it melted some of the wrap and insulation together and it made quite a mess. Being a spark i have access to all ways of keeping cables tidy so i have found some stuff i'm going to try to neaten the looms up with. Also have the gearbox, alternator, brake calipers, caliper carriers and starter motor all stripped off. And i have the lower part of the windscreen in bits to replace the linkages hopefully get some more pics up tomorrow.
might even get the engine out :)
well the engine is all ready to lift out but have had a rest this weekend due to mum needing some work done. Going to pick up my new clutch and flywheel and a new passenger wing today cheers roacher :) also got my new pistons from dunkz today so my spare engine will be getting stripped this week to go to the engine builders this weekend. Also going to start rubbing down the front crossmember and chassis legs as well and start hammeriting !
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0005.jpg
box of goodies:)
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0006.jpg
passenger loom
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0007.jpg
next time we see these they'll all be nice colours:)
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0008.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0015.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0017.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0016.jpg
pulsar IC mocked up for fitment :)
and none of this so far would have been possible without my trusty wee soundsystem :sxoc:
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0009.jpg
Ol'_200sx_thing
11-03-2008, 19:25
ive got one of those for my laptop :D
al you need now is flared arches.... :wack:
ive got one of those for my laptop :D
al you need now is flared arches.... :wack:
what makita battery gun battery? lol:wack:
funny you should mention that dear sir:eek: :whip:
Ol'_200sx_thing
11-03-2008, 19:34
lol ! :D
Its quite a good little thing aint it, i would use it for my ipod, but it got stolen :mad:
Il see you at the meet mate :thumbs:
while i was away
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0018.jpg
cable tidy
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0019.jpg
oooooooooooh
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0020.jpg
am i glad to see the back of this :nod:
and none of this so far would have been possible without my trusty wee soundsystem :sxoc:
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0009.jpg
Better not let the Police see that... it sooooo looks like an Ipod powered Pipe Bomb!
min i da belive u put that sling round the oil filter:) a tip tho for the excess tar on the floor warm it with a hot gun an scraper.
Jesus dude.. you've seen us take engines out before... why did you sling her by the filter and not the engine mount bracket?!
You must want to hurt yourself :wack:
nevermind that hes hardcore he undone the gearbox from the block:) i dropped the four bolts an pulled the bitch out together:)
nevermind that hes hardcore he undone the gearbox from the block:) i dropped the four bolts an pulled the bitch out together:)
We always did that until we put my engine back in... put it all back in as one and it made it sooo much easier :nod:
But me and duncan can now get a CA18 out from the lifting of the bonnet to dropping it on the floor in just under 50 mins :)
Hows your Car(s)(s)ermm(s) getting on?! :wack:
20 sthil saw:thumbs: hadnt timed myself didnt take long common sence about the job gets you home sooner had my girlfriend help too shes handy with the spanners aswell which helps :)
i expect it was round the filter as he has no intrest of returning that engine to the car.
Thats exactly why duncan if it broke i would of just laughed it is the most hated thing in my life!
Done a couple things this week nothing major but it is the WEEKEND let the work begin again !!!!! :)
Was sadly busy today so i only managed to wash the car and turn it about so i can get all the rear suspension stripped off this week.
YEEEEEEESSS!!!!
So happy managed to remove my subframe today all myself and all with out a snapped bolt :D
Will strip it this week and post more pics
also got my goodridge hoses this week and ordered a couple more things :)
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0187.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0188.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0189.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0190.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0191.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0192.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0193.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0196.jpg
What is this sensor for on the diff
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0197.jpg
What is this sensor for on the diff?
That's the rear ABS sensor.
thats ok dont need that anymore :D
bit more progress tonight rear subframe is stripped now the bushes have to all be removed woo hoo :(
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0187-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0189-1.jpg
think this was the cause of my severely crap handling
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0192-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0193-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0194-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0195-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0196-1.jpg
Mmmmmh flame grilled subby bush :D
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0197-1.jpg
subframe bushes are mostly out now :)
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0226.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0225.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0224.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0223.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0217.jpg
made light work of it :D
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0216.jpg
sorted some of the parts i have so far :sxoc:
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0234.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0233.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0232.jpg
And colour reveal although it doesnt do it justice :rolleyes:
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0230.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0229.jpg
well started the final piece of this large puzzle tonight
the engine got stripped as far as i could before i gaveup and went for a cuppy
here's the pics
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0224-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0225-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0226-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0227.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0228.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0229-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0230-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0231-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0232-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0233-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0234-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0235.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0236.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0238.jpg
Havent checked but i hope the pics of the big ends show just what shocking condition they were in i.e. non existant!!!
And yes that is my spare bedroom i'm stripping/rebuilding it in (already done a B16A2)
Fake Ben Taylor
10-04-2008, 00:36
keep going bud :)
looks like a lot of rust in those bores though......
hopefully be ok once theyve been made a bit bigger :)
I dont think im gonna stop mate trying hard not to lose heart but when money dries up and your getting no overtime its hard
COME ON CHES GIVE ME OVERTIME !!!!! :wack:
TarmacTerrorist
11-04-2008, 21:33
looking good mate keep at it! you got this far :thumbs: Ca looks like its crying for some attention :nod:
looking good fella.kepp it up,the engine certainly looks like it needs some attention:nod:
cheers guys good to see some people are reading :)
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0269.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0270.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0265.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0265.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0267.jpg
Its Hammer time !!!!!
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0268.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0261.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0262.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0263.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0257.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0245.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0250.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0254.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0258.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0259.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0260.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0244.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0243.jpg
nice new clear bricks cheers mike :thumbs:
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0240.jpg
my other project car :)
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0241.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0242.jpg
alanjuggler
12-04-2008, 22:21
not to poop on your parade, the thread is great so far :thumbs: be careful using a jun flywheel with a paddle clutch - this is what ended up of mine..
www.aoph09.dsl.pipex.com/ilovejun.jpg
that was about maybe 4k miles. no track work, mostly traffic so probably my own fault, just make sure you choose your clutch wisely :)
(though i believe there's other reports of similar happening with other cars, evos and the like)
is that trying to get it to slip in traffic that did that mate ?
the combo has prob had more use then that already in Roachers car TBH
also cheers for the comment :thumbs:
YES !!!
Some more progress finally full details later tonight once i take some pics
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0278.jpg
ABS comp in bin :)
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0279.jpg
all the stickers have been removed now :)
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0308.jpg
How th dash looks :eek:
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0313.jpg
Rear inner arches all rubbed down
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0312.jpg
only hole this year thank god :)
And splashed a bit of paint about :D
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0307.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0306.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0305.jpg
There's been little things happening as well but theyall add up pics of spare engine soon
Hi mate, long time no see or hear and now i know why!! haha.
Good to see the progress coming along nicely, iv been off work for a month with a collapsed lung but when im fit i may pop through and lend a hand??
Cheers Aj
no probs at all mate chuck me a text cause i dont have your number anymore
More started to rebuild my interior just now as im still waiting on my bushes from Angelus and my suspension arms from the painters
so
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0003-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0004-1.jpg
Tried tidying up the engine bay with a bit of gloss black and tbh it looked crap so i went all out and matt blacked it much tidier but it will get a proper paint over winter
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0005-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0006-1.jpg
Then moving back inside there was a couple dangly wires behind the dash board so i followed them and identified one or two but there is still 3 or 4 unknowns
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0012-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0013-1.jpg
TBH as i know the car works i'll prob just tidy under the dash up and replace all the trim as i dont want to start hacking into the stupid old non factory fit alarm :(
thehats13
22-05-2008, 00:24
ill help you remove the alarm when we do the brake pipes etc ill use me trusted cut the red ire it still runs woo hoo teqniche it worked well on my s13 untill i could not stop the hzard lights but judt had not found all the wires lol
its actually just about out min just run out of light, a couple of factory looking wires is all thats left but yeah you can give us a hand checking over and stuff if you want :)
Have you still got air con?
I took out the air con matrix as well, its pretty easy to open up the plastic housing (couple of clips & screws), removed the matrix, sensors, wires, etc and traced them all back to the switches and seal up the holes!
I really should get round to posting a pic of the wiring I've removed so far! Its rediculous!
Stuff I removed completely:
ABS wires/ECU/Sensors
Cold Start
Air Con (inc matrix, sensors, etc)
Rear washer Pump
Headlight washer Pump
Washer Water Level
Boot Light
Rear Speaker Cables
Cig Lighter
Centre Console Lights
Glove Box Light and Switch
All in all about a black bin bags worth!!
Any other plans for the wiring in yours?
Col
Aright min, want me to sort your wiring instead of Stuarts trusty "snip wires till complete car failure" technique. :D You seen yourself the mess i went through with the john deere and puggers wiring, will only take me half an hour to sort everything out. :thumbs:
adam031089
22-05-2008, 14:07
fair play mate youve pput a lot of work in already hope the result is gd :):)
200sxslide
22-05-2008, 15:51
hi mate good to see the car coming along hope 2 see u at the last few rounds of pro street :thumbs:
Have you still got air con?
Any other plans for the wiring in yours?
Col
Yeah its still in just now but it will be coming out i've not stripped all the looms down inside so thats a job i can possibly do over winter. Other than that am not sure what else there is that i can do with it.
Aright min, want me to sort your wiring instead of Stuarts trusty "snip wires till complete car failure" technique. :D You seen yourself the mess i went through with the john deere and puggers wiring, will only take me half an hour to sort everything out. :thumbs:
just whatever mate you can easy have a look whenever but i would like you to desolder then resolder that mess in the fuse box if thats ok ?
fair play mate youve pput a lot of work in already hope the result is gd :):)
cheers adam better be bloody worth it and it wont even have its mega cool engine till after winter :rolleyes:
hi mate good to see the car coming along hope 2 see u at the last few rounds of pro street :thumbs:
me to mate really wanna see if i can steal that 13.3 trophy :D
thehats13
22-05-2008, 19:10
theres a little more involved than just snipping them a bit of seelotape works lol only joking tho solder and heat shrink all the way
Yeah its still in just now but it will be coming out i've not stripped all the looms down inside so thats a job i can possibly do over winter. Other than that am not sure what else there is that i can do with it.
Change of plan! Ignore my post, seems that removing all these sensors cause the blower only to work on setting 4! wooops!
Away to rumage in the bins now (luckily they didn't get emptied this week).
Col
well sorted out the mess last night much tidyer seems its just excess cables on the alarm sensors etc but the way theyre run it seems like heaps of individual cables.
http://i34.photobucket.com/albums/d114/fudi/PICT0019.jpg
http://i34.photobucket.com/albums/d114/fudi/PICT0017.jpg
also gutted the air con box to lose a bit of weight etc
http://i34.photobucket.com/albums/d114/fudi/PICT0015.jpg
http://i34.photobucket.com/albums/d114/fudi/PICT0014.jpg
and burnt out a 70mm holesaw making a big hole :)
http://i34.photobucket.com/albums/d114/fudi/PICT0016.jpg
So that leaves fitting an engine and fitting all the rear suspension really :wack:
Interior finished apart from the 1 gauge im waiting on then connecting up the radio :D
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0002-2.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0010-1.jpg
New cam covers fitted to spare engine
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/Photo-0001.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0008-2.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0006-2.jpg
and took delivery of these :)
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0011-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0012-2.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0013-2.jpg
Well saturday Stuart (aka thehats13) came down and gave us a big hand along with Tweed (another mate) So now the welding is done brake pipes are done and ABS is fully removed.
Although as you will see below i have a slight problem, its a 'slightly' leaking shocker :( but thanks again to stuart and also to Marcus who has arranged a new set of suspension! :)
So some pics lads
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0014-1.jpg
just a 'wee' leak :(
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0015-1.jpg
Brake pipes
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0016-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0019-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0020-1.jpg
Started sorting out the loom because my original idea is now not going to work as the loom is to big:(
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0018-1.jpg
Got my new and last gauge fitted now
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0023.jpg
And started getting my arms and subframe back although theyre not the colour i wanted they'll do
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0025.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0026.jpg
And Mr HAT
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0017-1.jpg
thehats13
03-06-2008, 19:23
goota ove my cheesy smile but im sure i was ooking at the camera it must have been the heat that got too me on sat
barney rubble
03-06-2008, 19:26
you look like you need a cup of tea and a sit down:furious:
ooo, some nice shiny parts. When we fitting this subframe then?
thehats13
04-06-2008, 22:28
ooo, some nice shiny parts. When we fitting this subframe then?
You're not, it's top secret :thumbs:
You're not, it's top secret :thumbs:
Sounds quality. Cant wait to see this crazy top secret subframe stuff! :wack:
Right not updated this in a while and dont really have much pics either but new changes since the last update
1. After finding 1 front strut leaking i bought tein coilovers and fitted them :)
2. Fitted all the rear subframe and arms again
3. Fitted all my brakes back on
4. tidyed my shed and took delivery of a new ride on lawnmower :)
5. Prepped my new engine ready to drop in :)
Will try and get somemore pics this week :)
FOZZY2000
18-07-2008, 11:23
a very good project matey keep up the good work a very good read
hey guys got a few random pics from the camera have a few more on my phone but not sure how ill get them off
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0098.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0103-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0104-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0105-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0106-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0107-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0108.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0102-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0100-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0099-1.jpg
and what ive been living off for the few nights
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0101-1.jpg
Coilovers are on :)
away to do some more spannering now will hopefully post an update when i get back :)
GET IN !!!!!!!!
Engine is back in cheers Dunkz so not much to do now
1. Pipe up intercooler
2. tighten up a couple bolts
3. washer bottle
4. body panels back on
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0109.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0118.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0119.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0117.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0104-2.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0116.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0115.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0114.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0112.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0084-1.jpg
a lot done now since the last update wiring loom sorted and plugged back in, gearbox all fitted back up properly engine plumbed in and secured and lots of little niggly bits all over the car.
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0121.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0122.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0123.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0124.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0126.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0128.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0125.jpg
So what was/is so top secret about the Subby then?! :wack: :)
well if i told you it wouldnt be a secret would it ;)
just in from the car and thats the new FMIC hooked up cheers Dunc :thumbs: the exhaust fitted cheers Hat battery live run in and engine earthed oil pressure sensor hooked up and my gearstick fitted back in :)
thehats13
08-08-2008, 09:53
gettig there bud you still need to collect that bit of wiring from me tho so your knock sensor works again
woop woop it runs and moves under its own power now have a matter of days to get test on it :) pics coming when i can be assed
Also thanks to Kieron for giving me the lowdown on the ecu fault codes it was the AFM :thumbs:
had it out for a wee drive and been prepping like mad trying to get it ready for its mot - FRIDAY 8 AM
some pics
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0254-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0255.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0256-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0257-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0258-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0259-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0264-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0263-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0262-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0261-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0260-1.jpg
Your meant to disconnect the battery charger before you go driving away and im sure shutting the cable in the boot wont do it any good. :annoyed::smash:
Your meant to disconnect the battery charger before you go driving away and im sure shutting the cable in the boot wont do it any good. :annoyed::smash:
Haha, epic sulky fail :D
Looks like she's coming on well mate, the Wellers are growing on me :nod: Good work boys :thumbs:
Haha, epic sulky fail :D
im not even gonna bother starting to dig that hole:D
Looks like she's coming on well mate, the Wellers are growing on me :nod: Good work boys :thumbs:
Boys ??
Dunkz helped me for a couple hours one night to align the gearbox and drop the engine in
Stuart did my brake lines
Kamikaze (rory with the starlet) has been up helping me the last couple nights
other than that ive done it all myself and i have to say im quite proud of myself for it (apart from various bits of over the phone advice!)
But as my MOT loomed, 8 o'clock this morning, problems started to arise - last night the brakes wouldnt bleed eventually got it figured down to a fubared caliper
also noticed the front drivers ball joint was fubared one quick text to Dunkz and i had 2 new ones at my disposal. problem solved :) was it bollocks, fitted the caliper re-bled the brakes pedal seemed a little soft but not to bad , cool ......
moved onto the next jobs sorted them then thought yes ready took it for a drive and lo and behold no FCUKING BRAKES:annoyed::annoyed::annoyed:
also still a big missfire at around 4k rpm:cry:
and a knocking noise coming from the back that i dont like anyone any ideas?? :cry:
so no MOT tomoro and no crail on sunday :cry:
Unlucky mate,youve certainly made some progress,dont be put off you will get there:thumbs: keep up the good work and pics and good luck:)
kamakazi
29-08-2008, 14:51
Fud,
Did you replace the plugs with the new ones? Sounds like ignition.
Get the timing checked.
The last night i was up, the exhaust was sitting really close to the subframe, could be the cause with the engine moving around.
Will sort the brakes asap, who helped you bleed them last night?
knocking people are reckoning could be just the noises coming through the car with the alloy bushes
it was Mr Honda broonie that helped bleed the brakes i was bleeding and he did pedal did get more air out but obviously wasnt enough :(
No haven't changed the plugs yet will do tomorrow
Kingj cheers mate was so tempted to limp it into the scrappy this morning was gutted :(
good work there mate, love the wellas too, did they come with the car cos we are having trouble trying to find some in sizes bigger than 13" for a mates r5 rally car.
just out of interest tho. are those ally wheel nuts, if so id get rid of them asap before they get rid of themselves.....with your wheel attached down the road. or break when your trying to change the wheel next time.
wellers came from a guy on DW theyre 15's theyre the nuts from apex
**NEWSFLASH**
The sill has been welded looks like new cheers Bogles!!!
Pics soon
Kingj cheers mate was so tempted to limp it into the scrappy this morning was gutted :([/QUOTE]
if your selling let me know min
ok so been a bit lax with whats been happening but heres some updates
************************************************** ******
well lets face it im shite at updating this lol
was at the car tonight so heres what i got to and where im going
the plan is still to compete in BDC '09
the car was all ready to go for its mot but i wasnt quite happy so it didnt make it (this was august)
so the car was pretty much finished bumpers back on number plates etc got it looking like this
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0259-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0258-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0256-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0257-1.jpg
but now the wellers are for sale and the front end has been removed the engine is coming out again this week and things are away to change;)
I have +1mm wisecos lying about so its rude not to put them in and i have a sexy new manifold and turbo lying about so ...........
Also someone we all know (but will remain a silent party) will be supplying me with a new front end of the silvia variety :) (as soon as i remove my digit from my anus)
Also i think im going to be getting a Nistune ECU and some large injectors;)
some pics
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0123.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0122.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0121.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0260-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0261-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0262-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0263-1.jpg
more recent pics and from tonight
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0030.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0031.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0032.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0033.jpg
found this lying in the shed tonight while i was tidying up how chuffed
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0039.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0050.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0049.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0048.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0047.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0046.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0045.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0044.jpg
ok update time
just a few pics though
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0044-1.jpg
became this
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0049-1.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0051.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0052.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0053.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0054.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0055.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0057.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0058.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0059.jpg
Cheers Mick :)
Also took the rollcage out for a splash of colour
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0062.jpg
ha ha oily hands tonight:D
out with the old
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0072.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0073.jpg
and in with the new
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0074.jpg
http://i34.photobucket.com/albums/d114/fudi/200sx/rebuild%20take%202%202008/PICT0075.jpg
sweet, really starting to take shape. love the top mount :)
Magicmat
15-07-2011, 10:25
Sometimes you have to know where a car has been to know where its going :nod:
I was looking for those nice pictures of the car drifting, but cant find em? .. i think they may be in my project thread but i cants see it now.
this cars come a long way buddy :thumbs:
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.