new project on behalf of sx_minx

[slider91]

I am starting this post as we are looking to get this done in the next 4-5 weeks so here is the list of things to be done in that time :wack:

rebuild the engine we have ( bought it and recieved it in bits) :wack:
take out the auto box and convert to man ( have all the bits for this now as we went and picked up the conversion bits on sunday)
make sure that all is running nicely and sort out any teething problems we may have along the way :thumbs:

we may even be doing an s14 front calliper conversion at the same time also :wack:

Pics will follow :thumbs:

[slider91]

ok here are the pics we have so far :thumbs:

http://sxoc.com/vbb/attachment.php?attachmentid=47162&stc=1&d=1184062176
http://sxoc.com/vbb/attachment.php?attachmentid=47163&stc=1&d=1184062181
http://sxoc.com/vbb/attachment.php?attachmentid=47164&stc=1&d=1184062187

the engine as is now however there is bad scoring on no4 cyl due to a piston being burnt :wack:
http://sxoc.com/vbb/attachment.php?attachmentid=47165&stc=1&d=1184062191

[slider91]

we are looking to get all the work done in the next 5-6 weeks :wack: wish us luck :thumbs:

[sx_minx]

Bit of back ground info on the car for you guys....

It was bought from a member from here the end of May and unfortunately due to time and funds it still as it was bought :cry: But thats about to change so will keep you informed of the progress with lote of details and pics :thumbs:

Nissan 200SX S13 Executive automatic.
Morello Pearl Metallic
140,000 miles
Alloys are near perfect and all tyres are near new P6000.
Has following mods.
Stage 1 chip.
HKS adjustable actuator (set to 15psi).
Blitz air filter.
Apex Performance stainless exhaust (less than one year old).
Autometer boost gauge.
Front and rear strut braces.
Momo steering wheel.


Car blew a piston ring, hence the need for a rebuild.....but also gives me the opportunity to convert it to manual :D

[pdh 14a]

Looks a nice one Simon/Tracey :nod: Good luck with the work :thumbs:

[slider91]

cheers paul I am sure that it will all go well :wack: well hope it will anyway lol :thumbs:

[driftnut]

It sure was looking nice at the weekend!!!

[foghorn leghorn]

Less talk, more work. Crack on guys

[slider91]

It sure was looking nice at the weekend!!!

that was my s13 not traceys that was at chepstow :p hers is still sat on the drive at the moment :wack: I must get some work done on it soon :thumbs:

[sx_minx]

Less talk, more work.

You tell him Jase :D :wave:

After all, he is supposed to be the mechanic :wack:

[slider91]

well work will be started tonight I will be starting on the new engine that is in bits at the moment to go in once the engine is built then we will get the old engine and box out and start on the conversion and lots of pics will follow :thumbs: lets see how long it takes lol :wack:

[slider91]

well work started friday in the pooring rain :cry: the engine is now stripped and awaiting me to put it back together once done then we will be getting to ripping all the old stuff out of the car ie auto box and old engine :thumbs: pics will follow soon :thumbs:

[slider91]

well work carried on last night not much done though :( got the auto selector out and a few other engine ancillaries out of the way :thumbs: more work will be done tonight :thumbs: pics to follow :wack:

[slider91]

some more work was done on sunday evening getting the engine ready for removal and then getting the auto selector removed :thumbs: also last night seeing as I didnt have that much time to do anything I got the turbo timer fitted lol even though it doesnt need it just yet. However the peeps tracey got the timer from sent out the wrong harness and thus I had to make the s14 harness that they sent fit. That was a bit of a pain but it is all done now :thumbs: more work will be ongoing tonight :thumbs:

[sx_minx]

well just got in from doing a lot more work tonight I will post up some pics tomoz :thumbs:

[slider91]

right after a bit of work being done last night the engine is now out :) here are the pics of how to get an engine out without an engine hoist :eek:

http://sxoc.com/vbb/attachment.php?attachmentid=47843&stc=1&d=1185952596
http://sxoc.com/vbb/attachment.php?attachmentid=47844&stc=1&d=1185952596
http://sxoc.com/vbb/attachment.php?attachmentid=47845&stc=1&d=1185952596
http://sxoc.com/vbb/attachment.php?attachmentid=47846&stc=1&d=1185952596
http://sxoc.com/vbb/attachment.php?attachmentid=47847&stc=1&d=1185952596

[slider91]

http://sxoc.com/vbb/attachment.php?attachmentid=47848&stc=1&d=1185952786
it seems to be stuck :wack:
http://sxoc.com/vbb/attachment.php?attachmentid=47849&stc=1&d=1185952786
http://sxoc.com/vbb/attachment.php?attachmentid=47850&stc=1&d=1185952786
http://sxoc.com/vbb/attachment.php?attachmentid=47851&stc=1&d=1185952786
http://sxoc.com/vbb/attachment.php?attachmentid=47852&stc=1&d=1185952786

[slider91]

Hmm I dont know but something looks wrong here :wack:

http://sxoc.com/vbb/attachment.php?attachmentid=47853&stc=1&d=1185953007
Lets see if I can sort it out :thumbs:
http://sxoc.com/vbb/attachment.php?attachmentid=47854&stc=1&d=1185953007
ah there we go engine finally out :thumbs:
http://sxoc.com/vbb/attachment.php?attachmentid=47855&stc=1&d=1185953007
http://sxoc.com/vbb/attachment.php?attachmentid=47856&stc=1&d=1185953007
http://sxoc.com/vbb/attachment.php?attachmentid=47857&stc=1&d=1185953007

[slider91]

http://sxoc.com/vbb/attachment.php?attachmentid=47858&stc=1&d=1185953440
who needs a stop pedal these cars are ment to go fast arnt they :wack:
http://sxoc.com/vbb/attachment.php?attachmentid=47859&stc=1&d=1185953440
now that the auto brake pedal is out it is time to put the manual bits in :thumbs:
http://sxoc.com/vbb/attachment.php?attachmentid=47860&stc=1&d=1185953440
http://sxoc.com/vbb/attachment.php?attachmentid=47861&stc=1&d=1185953440

more to do tonight including cutting the hole for the clutch master and putting in the pedals.

also got to finish rebuilding the new engine and pull out the auto box :thumbs:

[slider91]

more work done last night pics to follow.

Done the wiring for the manual box and the inhibitor bypass

also got the clutch master in and the pedals and fed the pipes under the car.

we will get the pics up later on.

[GAV200]

Looking good guys, (Not the semi nude shots that is:wack: )

[M.D.]

did you not mash the power steering pipes getting the engine out like that ????

love the gheto removal tho, im about to use a forklift to get mine out lol

[slider91]

Looking good guys, (Not the semi nude shots that is:wack: )

you know you love it realy gav :nod: :wack:


did you not mash the power steering pipes getting the engine out like that ????

love the gheto removal tho, im about to use a forklift to get mine out lol

thanks :) no didnt touch the ps pipes with the t/c still on the engine and the box still being in the car too lol :wack:

[slider91]

right not much done last night just got the old auto box out and ran all the piping for the clutch slave cylinder inc the compensator unit so it will be not as harsh gear changes :wack:

didnt get any pics though :( I will get some later.

[slider91]

not much done on the weekend due to 1) finding that the uk head is foobard and the fact of going to tramp drift on sat which was awesome :cool: we will be progressing with the rest of the engine rebuild this week.

the bottom end is now together just looking for another head :wack::cry:

[Sideways Danny]

whats wrong with the head?

[slider91]

on cyl 4 where the comp ring seals it has melted and will need about .4mm taken off it to get it flatted out :cry: so it wont seal and will just cause problems later on dude

[slider91]

well found a head so we will be getting the engine together tonight :thumbs:

[sx_minx]

Right we have some more progress pics we didnt get much done on the weekend as we were met with this when rebuilding the engine :cry:

http://www.sxoc.com/vbb/attachment.php?attachmentid=48034&stc=1&d=1186523128
http://www.sxoc.com/vbb/attachment.php?attachmentid=48035&stc=1&d=1186523128

However the rest of the head is in fantastic condition :(

http://www.sxoc.com/vbb/attachment.php?attachmentid=48036&stc=1&d=1186523128
http://www.sxoc.com/vbb/attachment.php?attachmentid=48037&stc=1&d=1186523128
http://www.sxoc.com/vbb/attachment.php?attachmentid=48038&stc=1&d=1186523128

[sx_minx]

so Si got on with the man conversion wiring like this

http://www.sxoc.com/vbb/attachment.php?attachmentid=48041&stc=1&d=1186523556

he done a nice job of putting a plug on the reversinglight switch and the loom wiring :thumbs:

http://www.sxoc.com/vbb/attachment.php?attachmentid=48042&stc=1&d=1186523556
http://www.sxoc.com/vbb/attachment.php?attachmentid=48043&stc=1&d=1186523556

and installed the clutch master cylinder, slave and pedal box's

http://www.sxoc.com/vbb/attachment.php?attachmentid=48044&stc=1&d=1186523556
http://www.sxoc.com/vbb/attachment.php?attachmentid=48045&stc=1&d=1186523556

[sx_minx]

and today he built the engine up :cool:

http://www.sxoc.com/vbb/attachment.php?attachmentid=48047&stc=1&d=1186524180
http://www.sxoc.com/vbb/attachment.php?attachmentid=48048&stc=1&d=1186524180
http://www.sxoc.com/vbb/attachment.php?attachmentid=48049&stc=1&d=1186524180
http://www.sxoc.com/vbb/attachment.php?attachmentid=48050&stc=1&d=1186524180
http://www.sxoc.com/vbb/attachment.php?attachmentid=48051&stc=1&d=1186524180

[sx_minx]

then puth the clutch on so it is all coming together now shouldnt be long untill I get it on the road :cool:

http://www.sxoc.com/vbb/attachment.php?attachmentid=48052&stc=1&d=1186524579

so now all that is left to do is get the engine and box back in the car and get it all running properly :wack:

[foghorn leghorn]

:clap:

[slider91]

cheers jase :cool:

[twiggy]

come on slacker :P

cant wait to seee it :sxoc:

[GAV200]

And why's it taking so long:rolleyes: :wack:

CAAAAAAMON get it back in there:D


Top work there BTW:clap:

Also were did you get the brass vacuam "T" peice connection pipe from in the pick of the master cylinder:confused: I need one

[slider91]

And why's it taking so long:rolleyes: :wack:

CAAAAAAMON get it back in there:D


Top work there BTW:clap:

Also were did you get the brass vacuam "T" peice connection pipe from in the pick of the master cylinder:confused: I need one

it was already on there sorry gav lol well I only spent about 2 hrs on it last night and most of that was putting the box on the engine lol :wack: I now need to change a couple of hard pipes on the engine as 2 of the coolent pipes are different on the jap bottom end than the euro spec one :( but that will be done tonight :thumbs:

[slider91]

well finally got the engine and box in the car last night :wack: reason being having to repipe the stock water cooled oil cooler in on an engine that didnt have one boy that was fun lol.

well with that done we shoehorned the new engine and box into the car and I have got it all bolted in along with the prop.

I did take some pics last night and will get them up asap all thats left to do now is plug all the wiring in and do the plumbing oh and put the ancilleries on ie exhaust mani and turbo, alternator, a/c pump, and p/s pump then get some oil then we are good to go :thumbs:

[foghorn leghorn]

well finally got the engine and box in the car last night :wack: reason being having to repipe the stock water cooled oil cooler in on an engine that didnt have one boy that was fun lol.

Sorry Si, don't understand your discription above. What are you doing? I'm:confused: now

[slider91]

ok sorry jase and for anyone else that I have confused there are 2 different types of oil filter housing one with and one without an oil cooler the one with is pictured below

http://sxoc.com/vbb/attachment.php?attachmentid=48111&stc=1&d=1186736577

now the 2 bits I have circled are different on the jap spec engine we have 1st the pipe that is attached to the block on the jap spec does not have the secondary (smaller pipe) coming from the main water feed and does not have somewhere for the water return to pipe back into the system.

I have had to figure a way of piping these in and make it work.

I hope that this cleares that one up for anyone that I confused :thumbs:

[foghorn leghorn]

Mmm I see

[slider91]

so what I have had to do is make up an elaborate steup of T peices plubing them all together lol :wack:

[foghorn leghorn]

Why don't you just bin the take off's, and use it as a jap spec bottom end:nod: you are just creating work for yourself mate

[slider91]

well i'ts all done now mate besides any help with cooling the oil is a plus I think :thumbs:

[slider91]

well I couldnt be bothered to do anything this weekend as the weather was so nice so we went to porthcawl for the weekend :wack: work will commence tonight though :thumbs:

[foghorn leghorn]

well i'ts all done now mate besides any help with cooling the oil is a plus I think :thumbs:

Agreed, I'm just a bit lazy like that mate

[slider91]

well had her running last night how ever found a small pin whole in the sump so that has to come back off again now :( we will get there dont worry :wack:

[foghorn leghorn]

Glad to hear it Si, well done fella:clap:

Little problems are so annoying, you got a spare any ways, haven't you?

[slider91]

I think I have mate yes I will have to have a lookl down the garage to make sure :wack: I did try to weld the old one up last night but my welder is old and crap now :cry:

[slider91]

well I replaced the sump last night and the car attacked me :cry: nearly broke my nose on the antiroll bar lol but on the plus side the new sump doesnt leak :wack: more pics to come soon :thumbs:

[GAV200]

well I replaced the sump last night and the car attacked me :cry: nearly broke my nose on the antiroll bar lol but on the plus side the new sump doesnt leak :wack: more pics to come soon :thumbs:

I had a wall once that did that:wack: Bloody inanimate objects:mad:

Good to hear it's coming along:D

[pdh 14a]

I had a wall once that did that:wack: Bloody inanimate objects:mad:

Good to hear it's coming along:D

Heres 2 people listening out for Gavs arrival :nod:

[slider91]

well she fires up and runs sweet as a nut just a few jubily clips to get then she is done :thumbs: oh and some antifreeze lol pics to follow just havent had the time to sort them out because of the time spent working on the car lol :wack: hopfully she will have her maiden voyage this weekend :nod:

[sx_minx]

well the s13 went out for its maiden voyage last night and I would love to say that it went off without a hich but we have a few teething problems as you would expect form the job that has been done :wack: I think that they will all be resolved shortly though (or I hope that they will anyways) so we should be at the bbq in my s13 not his this time arround :thumbs: we do have pics just havent had time to upload them yet. They will be done asap for you all to look at !!!

[foghorn leghorn]

well the s13 went out for its maiden voyage last night and I would love to say that it went off without a hich but we have a few teething problems as you would expect form the job that has been done :wack: I think that they will all be resolved shortly though (or I hope that they will anyways) so we should be at the bbq in my s13 not his this time arround :thumbs: we do have pics just havent had time to upload them yet. They will be done asap for you all to look at !!!

Chuffed for you girl, well done Si

[sx_minx]

Some bad news guys, project has been terminated. I was involved in an RTA last night...... :cry:

And before anyone starts jumping the gun, i was not, repate NOT haring it or trying to get it to step it out at all!!!!! But unfortunately that's what it did :(

Wet roads and a greasy roundabout dont match.

Luckily no one has been seriously hurt, but the cars a total write off, and now a convertable as the roof had to be cut off!!! :cry: :cry: :cry: :cry:

This is my first accident, so guys please, no "that was clever" replys! :(

[Barryjdart]

Very sorry to hear this Tracey. At least you are OK even if a bit shook up.

[Mel B]

Bloody hell:eek: Roundabouts suck. Even more so when wet:(

Where were you to when it happened?? Ive had a slight knock on a R/about in newport:rolleyes:

Glad your ok anyway:thumbs:

[sx_minx]

Bloody hell:eek: Roundabouts suck. Even more so when wet:(

Where were you to when it happened?? Ive had a slight knock on a R/about in newport:rolleyes:

Glad your ok anyway:thumbs:

It was at Llantarnam Business Park on Cwmbran Drive :(

Battered, very bruised and shaken but glad its nothing more.

[GAV200]

Daim that sucks:( After all that work and everything:(

Glad to see your ok, And hope this hasn't put you off owning one.

[cardiff scum]

As long as your o.k. thats all that matters:nod: shit happens :cry:
Si....reshell it

[foghorn leghorn]

Sorry to her about this, reshell:nod:

[pdh 14a]

Oh god no :(
Hope you are ok Tracey,really gutted for you,hope you don't lose faith after all that hard work :cry:

[jow]

:eek: hope you are ok

[Sideways Danny]

sucks :( hope no serious injuries Tracey, roof cutting off sounds like a pretty big smash :eek:

[slider91]

right all no tracey doesnt have any serious injuries luckily she is just badly bruised and very shaken up. as for the car it is going to get stripped very shortly adn we will be selling most of the salvagable bits to fund the next project.

we get the car back today Hopefully (well this is what I have been told by the recovery garage AGAIN!!) so I will start to strip it later on this evening so if anyone is after any s13 bits give us a shout and I'll see if it is available :thumbs:

and thanks for all the well wishes and concern form all.

[slider91]

right I think it is time to resurect this post as tracey has another s13 now and work will begin on this very shortly :thumbs: we are going to get 2 rear quarter pannels tomorrow and I intend on fitting the new bonnet and bootlid on the weekend :thumbs: pics to follow

[foghorn leghorn]

:eek:holy thread revival batman

Where are you going to get 2 rear quarter pannels tomorrow???

[sx_minx]

:eek:holy thread revival batman

Where are you going to get 2 rear quarter pannels tomorrow???

Off down to Newbury thanks to a generous member who's said i can have the panels for nowt, just gotta cut them off ourselves............ Well, Simon has, i'll just stand around making things look pretty :D

[sx_minx]

well we went down to get the rear quarters today and got them damn they took a lot of cutting to take off :wack: we also came back with a bit more than we intended to as simon decided he wanted the roof as well so he can get rid of his sunroof lol.

We will be taking a good look at the car tomorrow to make a start on it and see how we can get the rear quarters to fit :thumbs: so watch this space!!!

[spesh]

:thumbs:

[slider91]

well we replaced the bonnet and bootlid yesterday and I put on the new door mirrors

pics to follow :thumbs: (as soon as we get them off the camera) :wack:

[sx_minx]

Ok well here are some pics of the work getting started! :thumbs:

[sx_minx]

Here is the reason behind the boot transplant!!!! :eek::eek:

[sx_minx]

Car as it stands, with the new bonnett on it! ;)

And yes i know it needs a wash! :wack:

[sx_minx]

New boot on :D

Looking patchy at the moment tho as we had to take the original spoiler off. Will get a pic of that next time, can see why they go so easily if not caught now tho :rolleyes:

[sx_minx]

And finally.......new mirrors on :)

I know these arent to everyone's tastes, but i like em! lol :D

[Sideways Danny]

that bootlid looks like an excellent find!!!!!!

[sx_minx]

that bootlid looks like an excellent find!!!!!!


The red one? Its off the *accident* one i had previously....as is the bonnett :D

[slider91]

the bootlid was off traceys other s13 and the bonnet dan :thumbs: we decided to keep them just in case tracey decided to get another s13 which we are glad we done :)

[slider91]

also the mirrors have white led's for the sidelights and yellow for the repeators so will be flushing off the repeators in the front wings and doing away with them in favour of the mirror ones :cool:

[Seccy]

Off down to Newbury thanks to a generous member who's said i can have the panels for nowt, just gotta cut them off ourselves............ Well, Simon has, i'll just stand around making things look pretty :D

And that you did... ;)

It's going to be interesting to see where this one goes.

[sx_minx]

And that you did... ;)

It's going to be interesting to see where this one goes.


lol :D :wave:

C'mon, not entirely true is it Graham?! I did get my hands dirty, and also injured myself getting your rear windows out :p

Once again, thanks ever so much for the panels .... and the extra stuff :rolleyes:

:sxoc:

[nitros]

And finally.......new mirrors on :)

I know these arent to everyone's tastes, but i like em! lol :D

oi your copying me there lmao told yer i would post on here about it didnt i :) and just to prove it heres mine on the car only diffrence is yours work lmao.

http://i48.photobucket.com/albums/f219/nitros4turbo/newcarlook.jpg

[slider91]

oi your copying me there lmao told yer i would post on here about it didnt i :) and just to prove it heres mine on the car only diffrence is yours work lmao.

http://i48.photobucket.com/albums/f219/nitros4turbo/newcarlook.jpg

yeah thats only because I done the wireing lol :wack:

[nitros]

mine will do soon also lol just about to go looking for vented grp wings AGAIN for mine lol have no choice then they will have to work

[JJ]

looks nice there you 2 :thumbs:

Will see it in August i think :nod:

[slider91]

thanks jj I am sure you will see them then :)

[nitros]

at last wings on order :D ok next up new bonnet :D hows your project coming on mate i hope your doing your fair share of work on the car :D your be in trouble if you aint lol

[sx_minx]

Well were hoping to get some more little jobs done tommorrow as long as the weather holds off :thumbs:

[nitros]

Well were hoping to get some more little jobs done tommorrow as long as the weather holds off :thumbs:

well all being well if you need a bonnet seeing as mines the same colour as your car then when i get the new one theres one here and a good one to save on spraying costs that is unless your having the whole car done lol

dont ask when tho but wont be long put it that way lol

[JJ]

thanks jj I am sure you will see them then :)

Cool :) :thumbs:

[slider91]

well I didnt get much done on the weekend mainly just wireing to the lights in the mirrors and fitting the head unit I did however make a gauge pod built into the dash for tracey and that took a fair bit of the time on the weekend :wack: however I think it will look good once finished :thumbs: no pics to upload just yet as traceys laptop has gone belly up and needs a new hdd :( but as soon as we can sort them out we will.

[turbotomo2oosx]

Woo hoo! i love a good project :nod: will have to pop over to see it dude :)

[slider91]

nothing else done yet as work has got in the way :( hopfully we will get the pics of the custom dash pod up shortly :thumbs:

[slider91]

well waiting for the kit to turn up now so as soon as it does then work will progress :thumbs:

[slider91]

well the kit should be here on friday hopfully :wack: will get pics up asap after that :thumbs:

[slider91]

I have now been told that the kit should be here tomorrow so we will see :wack: only a little late :wack:

[slider91]

well the kit didnt turn up after all and I am now livid with anger and will be giving this guy a call today to scare him silly :thumbs: after this set back traceys car will not be to the stage that I was hoping it would be by japfest however it will be on the road for it :thumbs:

[slider91]

ok a little update I have put the new wings that we have on and the one has been primered and the other will be done as soon as the filler work has been completed :thumbs: I will try and get some pics up asap for those who may be interested :wack:

I have also sanded down where the paint stripper was on the o/s door and rear wing and primered that so she is getting there :thumbs: may yet be ready for japfest, well at least in primer and back on the road for then anyway :wack:

[sx_minx]

Well as its been a glorious weekend down here, Simon has been getting on with alot of body work. :thumbs::D

Unfortunately due to the MOT running out and not having the time to correct all the things it would need to pass another one, it wont be making its apperance at Japfest this year :cry:

As im sat out baskin in the sunshine i thought i would upload some recent pictures to bring you all up to date :thumbs:

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54467&d=1210530950

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54468&stc=1&d=1210537323

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54469&stc=1&d=1210537377

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54470&stc=1&d=1210537377

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54471&stc=1&d=1210537377

[sx_minx]

I also decided i didnt really like the two line indentations going down the side of the car....... so......

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54472&stc=1&d=1210537493

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54473&stc=1&d=1210537493

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54474&stc=1&d=1210537493

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54475&stc=1&d=1210537493

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54476&stc=1&d=1210537493

[sx_minx]

Some more prep work....

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54477&stc=1&d=1210537638

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54478&stc=1&d=1210537638
Found Some more rust here so got rid of it and blatted the primer on to stop it from rusting again!!!
http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54479&stc=1&d=1210537638

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54480&stc=1&d=1210537638

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54481&stc=1&d=1210537638

[sx_minx]

And moving on to sorting out the bolt holes in the boot till i can sort a new spoiler :thumbs:

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54482&stc=1&d=1210537875

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54483&stc=1&d=1210537875

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54484&stc=1&d=1210537875

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=54485&stc=1&d=1210537875

[slider91]

finally we are starting to get somewhere with this however doing it all on the drive is taking its toll and taking more time :(

[pdh 14a]

Good work guys! Its taking shape now :notworthy:thumbs:

[nitros]

if simon wants some help on week days if working on it then give me a shout i aint busy in the week and dont mind lending a hand to get it on the move quicker :P but it is taking shape now looking a lot better :D