s13 re-build project [Archive] - SXOC Bulletin Board

200sxslide

13-04-2007, 15:14

:thumbs: hi everyone have had my s13 for just over a year now and have done lots of work /modding to her to get her to a semi decent state but now i have decided to enter the prostreetdrag series for some weekend fun so now the car will now be being built to a spec that can compete in the 13.3 to 12.3 class

parts that r now knackered and need replacing

-engine FINALLY BLOWN UP now replaced thanxs dazs13
-clutch (been on the way out since i got it)now replaced but rubbish uprated clucth on the way
-suspension (just getting old and tired)
-both frnt wings( my old man felt like reversing into one of me wings the other one was done by me)
-interior( grey leather knackered)mainly stripped now with bucket seats on the way /weight loss
-tailgate ( whos dosnt)perspex rear screen much lighter ./weight loss
-wheels and tyres ( bored of the standard ones )now konig 17"alloy wheels
-bonnet (fancy a carbon one)NEW FIBERGLASS VENTED JOBBY/ weight loss
- front bumper ( paint knackered)(and i smacked it through a fence )
-rear quarter and rear wheel drivers side ( after some twat hit me in the rear on a roundabout )

mods just bought
-stg 1 chip ( £40 off fleabay) FITTED
-perspex rear screen ( £20 of jasons13 thanxs ) FITTED
-ducktail drag spoiler ( £110 off flea-bay ) FITTED
_blitz sus power induction kit £35 off e-bay FITTED
_new secondhand engine (£100 off dazs13) FITTED
_vortex generators £25 (ebay special)FITTED
_grey s13 car mats £30 (ebay special)FITTED
_rear strut brace £20 (ebay special)FITTED
_pivot turbo timer £20(ebay)
_stainless steel coilpack cover £20(ebay again)FITTED
_short shifter £30(ebay again)FITTED
_fiber-glass vented bonnet £180(ebay)

parts removed_
tailgate glass (now perspex)
rear seats
rear doorcards removed
carpet
sound deadning
spare wheel
all boot panels
sound deadning under bonnet
original bonnet(now vented fiber_glass)
subs and amps
headlight cover(now vented fiber-glass)

plus a few new engine mods and more weight loss and some mickey thompson drag tyres
then well see how well i can do next year thanxs paul

Eric Bananaman

13-04-2007, 19:14

Good starting point,good luck mate, keep everyone posted as to how you get on
Eric:clap:

kingj

14-04-2007, 09:08

yeah,look forward to seeing this, keep us updated mate!!:thumbs:

200sxslide

15-04-2007, 17:12

hi thanxs for the encouragement i think im gonna need it :thumbs: :wack: :p

200sxslide

20-04-2007, 13:45

hi looks like disaters struck i had an accident the other night some twat drove into the side of me on a roundabout causeing some minor damage to the rear quarter and rear wheel insurance company might have written my car off for the minor damage although i dont know the outcome yet they might offer me to buy it back so it might still live will post up ;piccies of the damage to see what everyone else thinks as it really isnt bad but to the insurance it might be a write -off gutted:mad: :cry: :wack: :thumbs: :annoyed:

200sxslide

24-04-2007, 09:51

quick update
just won a stg 1 chip on e-bay for £40:eek:
hopefully it will be a good one piccie once i receive it :thumbs:
removed stereo gear aswell stripped out the boot

200sxslide

25-04-2007, 13:30

seems it might be possible to buy my car back off the insurance company and still have tidy sum left t so how much is an engine re-build and wheres best place to get it done or do i go for a second hand engine to save a bit of money and spend whats left on other areas of the car any thoughts suggestion please post them up thanxs paul:thumbs:

nitrodave

25-04-2007, 14:40

if you have the space, time and tools... pull the engine out and put it on a stand, then proceed to rebuild it. there are a few guides on how to do this, just search around.

looks like a good project, similar to wha ti'm trying to achieve - on a budget though ;)

good luck with it!

200sxslide

25-04-2007, 14:56

could be worth looking into mate ive got a garage to work in so seems do able ?but im impatient to have me car back running sweet and not leaving massive smoke clouds behind me so might go for the second hand option suppose ill have to wait to see how much the insurance couhgs up thanxs paul:thumbs:

200sxslide

04-05-2007, 15:13

hi just got a perspex rear screen also a ducktail spoiler thanxs:thumbs:

piccies will follow thanxs

200sxslide

10-05-2007, 10:22

hi quick update have fitted perspex screen over the weekend couldnt belive how much lighter it was compared to the one i just took off

200sxslide

21-05-2007, 19:18

http://www.mysportscar.com/features/project240/weightsavings/

just remembered this helpfull tip off my last thread some great weight saving ideas for those looking to diet lol:thumbs: :thumbs:

Ian McColl

21-05-2007, 20:59

where did Jason get the perspex screen from?

How much are they new? Are they easy to fit?

200sxslide

25-05-2007, 12:30

not entirely sure mate think he bought a sheet of perspex and did it himself not a bad job either

callum

25-05-2007, 15:46

Yer, I'd be interested in a perspex rear screen. The easiest way to better performance is diet the car, which is my first thing to do.

200sxslide

26-05-2007, 14:14

i agree ive taken more things off than ive added still it all helps eventuly if i ever get any luck would like to do some drag racing but thats a long way off yet :wack: :thumbs:

200sxslide

29-05-2007, 22:18

quick update have now fitted my ducktail spoiler and i have to say i love it .trouble is now its made the standard alloys look really crap so will have to spend some more money :wack: .thought while i had the spray can out id paint my vented headlamp cover as well (its been white for far to long)good weekends work all round except halfrauds charging me £23 to mix up 2 cans of paint still glad its done.now just the other 50 or so jobs that need sorting and we continue.......:thumbs: :thumbs:

200sxslide

19-06-2007, 11:27

hi just a quick update i have one smokey car

200sxslide

25-06-2007, 09:49

hi guys have spent the weekend working on the car again and have discovered the reason why i keep kicking out massive smoke clouds wait for it yes some idiot had fitted his one way valve the wrong way round(cheers mate u know who u r without that i would have bought a new engine)so now that im not doing james bond impressions anymore i decided to fix the split water hoses as well (done with a water pipe stolen off my mates kx125).so now everythings up and running again and i actullay drove the car for the first time in a month .I NOW HAVE THAT BIG SMILE BACK.......:sxoc: :sxoc: :D :D :wack: :thumbs:

my new air filter turned up 2

200sxslide

03-07-2007, 15:22

my engine finally decided to give up last thursday so it looks like i will be needing a new one after all so as i couldnt drive it at the weekend i decided to strip it and put things back together properly also started to strip the sound deading out of the boot got a bit carried away and ended up doing half the car now this is a slow and tedious job but some how i seemed to enjoy taking some of my frustrations out on it anyway more updates to follow maybe with pics if someone tells me how too do it :notworthy thanxs:thumbs: :thumbs:

Matty2Fatty

03-07-2007, 15:59

I thought I saw you working on it on sunday when I came past :)

If you want a hand I'm happy to help, or least get in the way :)

200sxslide

09-07-2007, 22:10

hi matty:wave: thanxs for the offer mate ill give u a bell witin the next couple of weeks just need to find an engine first .saw u today at the crossroads did u miss a gear when u drove off?:wack:speak 2 ya soon :thumbs: :thumbs:

Matty2Fatty

12-07-2007, 15:52

ummmm no :rolleyes: ok it slipped in 4th instead of 2nd, wonder what that sounded like from outside, the car sure didn't like it on the inside :wack:

give us a shout if you need a hand anytime :thumbs:

200sxslide

19-07-2007, 09:59

cool mate :thumbs:

200sxslide

22-07-2007, 23:52

hi have just got sum vortex generators for the car dont know if they actully do anything but i like the way they look:thumbs: :thumbs: :wack: :thumbs:

have also added new pics at last

200sxslide

25-07-2007, 15:08

have just got a rear strut brace off e-bay will post pics when it turns up thanxs:thumbs:

200sxslide

31-07-2007, 15:05

got some more work done over the weekend .took the engine and gearbox out without a problem split the box from the engine no problems.put the turbo and all my new braided hoses on .got to splitting the flywheel from the old engine took 7 bolts out no problem but the last one wouldnt budge .why is it that theres always one that wants to be a pain in the arse so work ground to a halt :mad: whilst i was doing that one of my mates got on with grinding down and spraying some rust in the engine bay :thumbs: whist we had the car up in the air thought we"d have a look to see if there was any rust .i wish i hadnt i now have on the passenger side floor a fist sized hole that will need welding :mad: so if anyone has any suggestion on how to remove my troublsome flywheel bolt then please post it up thanxs and hopefully the next time i wont have so many problems still wasnt a bad days work :thumbs: :thumbs:

piccies to follow .....:thumbs:

Matty2Fatty

31-07-2007, 15:24

I'm about fixing my sisters car round the corner from you (you've prob heard me ;) ) I'll pop in one evening and say hello :wave:

200sxslide

08-08-2007, 10:44

I'm about fixing my sisters car round the corner from you (you've prob heard me ;) ) I'll pop in one evening and say hello :wave:

cool mate im putting the engine back in tonite couldnt do it at the weekend as my engine crane broke :cry: still borowed another 1 now so feel free to pop round thanxs mate:thumbs:also got that bolt out of the flywheel at last should be able to crack on now a few piccies attach of me mates working on the engine chris and brad without them my hands would have to get dirty lol i think me mums getting fed up of the back garden looking like a garage too

200sxslide

08-08-2007, 22:37

engines back in :D :D :D :D :thumbs:
have also fitted all my braided water lines as well
just need to remember where all the pipes and wires go now

Matty2Fatty

09-08-2007, 08:23

I'll pop round tonight and we'll use mine as a guide :nod: :thumbs:

200sxslide

10-08-2007, 08:42

cool matty:thumbs: :D

200sxslide

10-08-2007, 15:35

its alive:D :D at last it runs :wack: :thumbs:

200sxslide

20-08-2007, 23:00

hi have also just bought

pivot turbo timer £10 off e-bay (blimey thats cheap)

stainless steel coilpack cover £20 off e-bay

piccies once they arrive :thumbs: :thumbs:

200sxslide

23-08-2007, 11:14

hi guys just a quick one. just got a short shifter off e-bay for £30

also finally took the car out whent to the reading jap car meet:wack: .not to bad good turnout lots of nice s14 there .not many s13 there other than matty2fatty (love ure car dude )myself and a pre-face lift in grey :thumbs:.

also last nite coming home from tesco in the pooring rain:censored: took the roundabout a bit to fast spun :wack: and whent up the kerb and thgrough a fence taking out said fence .got out thinking id be crying:cry: at the damage but some how had only whacked the front bumper a bit and popped my rear wheel which now looks wel bent and is toeing in quite bad everything else seems ok .so got a mate to give me a lift hme (dont carry a spare ) picked up one of my spare alloys .changed it and got back hme driving on 3 15" wheels and 1 16" will check more later but that seems to have been a lucky escape one word of advice people SLOW DOWN IN THE WET:thumbs: :thumbs: :thumbs: :thumbs: :thumbs:

Matty2Fatty

23-08-2007, 14:53

yeah we need to promote the reading meet more and get it back to it's former glory :) now def's back organising, shouldn't take long :)

bummer about the incident :wack: hopefully it's only cosmetic :thumbs:

200sxslide

24-08-2007, 08:51

hi yep as luck would have it i only did some minor cosmetic damage and bent the hub (maybe) so a big fat phewww:thumbs: (cause i have a spare one in the garage)

hi matty sorry i shot off had a phn call and had to deal with it next time though ill join u lot in propping up the bar thanxs :wack: :thumbs:

couple of photos from the reading jap meet

Matty2Fatty

24-08-2007, 14:09

well we only stayed for a quick one, so I wouldn't worry too much :) glad you enjoyed it, need to get more 200's there though :nod:

200sxslide

26-08-2007, 21:38

i agree mate they were abit thin on the ground :wack: :thumbs:

200sxslide

26-08-2007, 21:46

quick update picked up another gearbox 2day (thanxs jayjafri)so will crack on with getting on with it 2morrow hopefully this should fix my annouying tinging sound out of the box have also fitted my quickshift to it so lets see what differance that makes (if any).

have also just won a fiber-glass vented bonnet on e-bay so that should lose some more weight :thumbs: :wack:

200sxslide

26-08-2007, 21:49

this one :thumbs: :thumbs:

Matty2Fatty

26-08-2007, 22:16

nice :thumbs:

200sxslide

26-08-2007, 22:20

i think so dude it cost enough i got my self in a bit of a bidding war and spent more than i should have but o well:wack: :thumbs:

Matty2Fatty

26-08-2007, 22:53

opps :wack: :rolleyes:

200sxslide

28-08-2007, 09:18

like about a £100 more than i should have :wack: :wack: :wack:

Matty2Fatty

28-08-2007, 11:11

big whoops! :wack: :wack:

200sxslide

28-08-2007, 11:32

yeah its a good job im single or id be dead lol:wack:

200sxslide

28-08-2007, 14:45

gearbox is off now swapped for a better one (thanxs jayjafri)trouble is im having trouble getting it back on it just wont line up its peeing me right off :mad:

Matty2Fatty

28-08-2007, 14:49

you tried it the other way round?

yeah that's why i'm glad to be single again :) only problem is now my mum moans at me for spending too much on the car instead :rolleyes: just can't win :cry:

200sxslide

28-08-2007, 15:13

you tried it the other way round?

yeah that's why i'm glad to be single again :) only problem is now my mum moans at me for spending too much on the car instead :rolleyes: just can't win :cry:

HA HA HA

my mothers the same mate either way were screwed id like to have a word with the MAN who invented women THE GIT :thumbs:

Matty2Fatty

28-08-2007, 16:04

pass that one to the guy upstairs :rolleyes:

well my mum doesn't moan as such, she likes my car and knows I do too :)

200sxslide

28-08-2007, 23:21

my old dear hates mine scares the life out of her even if im doing 30mph she still moans :thumbs:

200sxslide

09-09-2007, 13:56

this one :thumbs: :thumbs:

vented fiber-glass bonnet

picked this up yesterday and have to say im gutted its in a right state(i won this in an auction for £180:eek: )its cracked all over the place its split in the corners so its seperating the paints bubbled every where i feel well ripped off £180 should have been more like £50 :mad: :mad: :mad: still hopefully its salvageable and i can fix it with some fiberglass and lots of filler :p :thumbs: ill post some pics later thasnxs

oh also it come off someone called skyrocket pilot who owned a yellow drift spec s13 i would avoid buying stuff off him thanxs :nod:

200sxslide

10-09-2007, 23:40

anyone ever feel like there talking to themselves:confused:

Matty2Fatty

11-09-2007, 07:04

constantly

200sxslide

24-09-2007, 10:17

new intercooler and some hard pipes:thumbs:

200sxslide

24-09-2007, 10:56

found some rust :mad:sorry could only find one before pic but theres more than that

200sxslide

24-09-2007, 11:25

decided to attack the rust this weekend the first picture i did the welding not to bad for a first go loike .have to say thanxs to my mate chris for his welding expertise:thumbs:and to brad and trigger for all there help so far to

200sxslide

24-09-2007, 11:29

couple of pics of how the cars looking now:thumbs:dont clean up to bad still need some rims though

200sxslide

24-09-2007, 11:46

decided to start sanding down my fiber-glass bonnet not coming along to bad its had about 3 hours of sanding to get it to this stage:thumbs:

200sxslide

24-09-2007, 11:52

also ive had these wheels for about a year now but cant decide whether to use them or not. there 7.5x16" i do like them but all the tyres r really low profile and when u put them on the car it makes it look like a 4x4.dont know whether to spray them black and fit new tyres or just look for some new ones suggestions please:thumbs:

200sxslide

27-09-2007, 23:57

anyone:cry: :thumbs:

daz_s13

28-09-2007, 08:50

Paint them white i reckon.

200sxslide

01-10-2007, 15:12

Paint them white i reckon.

hmm never even thought of that intresting:nod:

hi mate thanxs for the engine still going strong ill get back to u over those lower arms thanxs:thumbs:

bobbitt

08-10-2007, 17:36

hav people been takin the piss outta ur vortex generators?

200sxslide

08-10-2007, 21:35

hav people been takin the piss outta ur vortex generators?

nope:D besides cars are about doing what u like not what everybody else likes :mad: and i like them:thumbs:

200sxslide

11-10-2007, 08:46

hi guys just a quick update not much done recently went to japshow finale on sunday had a great day out and its the furthest the cars been since the engine change and she drove faultlessly so well pleased. the dreaded m.o.t. is coming up next monday allready ordered new brake disc<other ones r knackered>so ill just have to get them fitted and then hopefully should fly through once weve finished the welding.also might be getting some 17" alloys aswell all fingers crossed will post pics:thumbs:

200sxslide

14-10-2007, 20:50

hi everyone quick update have been doing the rest of the welding so its done for the m.o.t. quite pleased with the results so the car is nearly ready for the m.o.t. except my brake disc didnt arrive:cry: :censored: so to console myself i fitted a renault laguna frnt splitter to the car and i think it came out quite well any comments please post them up thanxs paul:thumbs:

200sxslide

18-10-2007, 23:33

my new front brakes disc have arrived:) :thumbs:

200sxslide

18-10-2007, 23:39

trouble is when i went to fit them got everything off alright but when it came to putting the pads back in we couldnt get the piston to go back far enough in the caliper to get the pads in despite much swearing :censored: and effort it just wouldnt budge:mad: so i think i have a siezed caliper:cry: so looks like its time to look in the parts for sale for a new front caliper o well u fix one thing something else screws up allways seems to be that way with work on the s13 :nod: :thumbs:

200sxslide

20-10-2007, 18:58

new calipers sorted (thanxs andypat):D :thumbs:and brakes now fitted and sorted

200sxslide

20-10-2007, 19:04

piccie of new wheels:thumbs:thanxs birdy

M.D.

21-10-2007, 11:11

like them mate, nice work

200sxslide

22-10-2007, 09:15

like them mate, nice work

thanxs mate :thumbs:

200sxslide

29-10-2007, 14:43

more new parts ordered:thumbs:

apex gearbox mount (mines f*ck*d)
front strut brace
s13 front rad cooling panel
twin 60mm apillar pod

wheels should be here for wednesday:nod: :nod: :D

Matty2Fatty

29-10-2007, 15:35

looks like it's coming on now, have to pop round and see it :)

200sxslide

29-10-2007, 17:10

hi matty how r u ?feel free to pop round anytime mate ill be about on sat getting the car ready for santa pod on sun see how fast i can do the 1/4 mile at last :thumbs:

Matty2Fatty

29-10-2007, 17:50

kool, I might well pop over and say hello on saturday then :wave:

200sxslide

29-10-2007, 19:55

cool mate :wave: :thumbs: might see u sat then:thumbs:

200sxslide

29-10-2007, 20:18

few new pics of my new alloys :D :thumbs:

200sxslide

06-11-2007, 11:42

hi everyone i finally managed to get some 1/4 mile times down at last best was a 15.1 at 92 mph also have got my wheels fitted at last and they look well sweet also fitted my uprated gearbox mount and to finish off i also fitted my rad cooling panel and a-pillar pod photos later thanxs paul:thumbs:oh and yes i know she needs lowering

200sxslide

06-11-2007, 12:36

have got the bug for drag racing now so have entered www.prostreetdragseries.co.uk lots of work to be done will be entering in the 13.3 to 12.3 street class so if anyone has any help/ tips or info then please post up thanxs paul:thumbs:

200sxslide

12-11-2007, 10:38

new pics coming soon

Matty2Fatty

12-11-2007, 12:59

kool!! wheels look good, didn't see the pictures when i checked last :wack:

200sxslide

12-11-2007, 18:21

hi matty:wave: yeah i liked them although they do need a refurb youll have to pop round and see for ureself .:D :thumbs:

awretham

12-11-2007, 18:42

Matty2Fatty

12-11-2007, 19:35

Yeah i'll have to pop round, but i'm being a bit crap at getting places at the mo, I seem to be in demand for my skills (God knows why? I just seem to get in the way more than help)

200sxslide

13-11-2007, 21:15

Yeah i'll have to pop round, but i'm being a bit crap at getting places at the mo, I seem to be in demand for my skills (God knows why? I just seem to get in the way more than help)

lol ,dont worry mate whenever ure free ,i have had a problem:( though mate unfortunately my mate brad wants to buy the whole of the white car off me as he wants his own drag car so im not gonna be able to do the subframe now mate sorry:cry: hope this dosnt wreck ure plans:notworthy :( :thumbs:

Matty2Fatty

13-11-2007, 21:19

bugger, well if that's the case then so be it, it's a bit of a pain, but nevermind, hopefully I can source another :)

200sxslide

13-11-2007, 21:22

Looks like it's coming along nicely mate :smash:

It's screaming out now to be lowered :nod: :thumbs:

Btw... I don't suppose you've got a spare radiator cap lying about? lol... Hopefully my replacement will arrive from Driftworks tomorrow, but if not I need to chuck mine and get it replaced asap! Mine seems to be leaking pressure... Or I hope it’s just the radiator cap and not something a lot more serious...

Anyway back on track, how your new engine running? all good I hope :)

hi mate how r u ?yeah it looks a bit like a 4x4 but im liking the wheels:thumbs: err yeah im pretty sure ive got a spare rad cap somewhere mate if u need it :thumbs: the engines running nicely now so that makes a change got a slight clucth problem now though:rolleyes: but u fix one thing then something elses needs doing :wack: :thumbs: if u need the rad cap lert me know :thumbs:

also got a friend off the sox website to photoshop the car lowered looks pretty cool

200sxslide

13-11-2007, 21:24

bugger, well if that's the case then so be it, it's a bit of a pain, but nevermind, hopefully I can source another :)

sorry mate it just solves alot of problems as i can move it out me garage round his sorry mate :thumbs:

Matty2Fatty

13-11-2007, 21:30

sorry mate it just solves alot of problems as i can move it out me garage round his sorry mate :thumbs:

that's alright, I'd rather shift a breaker as a whole than try and move it without a subframe :wack:

no worries :thumbs:

I'll try to pop over and say hello :D

200sxslide

19-11-2007, 13:37

quick pic of me at santa pod (sorry about the big number across it ):thumbs:

200sxslide

13-12-2007, 11:27

hi everyone thought id post a quick update as i havnt in a while .The car is starting to come together now and will hopefully be ready to do some more 1/4 mile action in the middle of jan @santa pod .Currently its sat on my driveway with a hole in the boost pipe so i cant drive it at the mo (been abusing a work smart car saving me loads on petrol)been buying a few parts lately its just to cold to fit any

engine torque damper £50 (e-bay)
3" down pipe and cat replacement pipe (already had a cat replacement pipe but ill just flog it )£60 (e-bay)
aerocatches (to keep the fiber-glass bonnet on ) £35
ngk iridium spark plugs £40 (e-bay)FITTED
pre-face front splitter £8 (e-bay)

after xmas buys

bucket seat
harnesses
t28 turbo
new clucth
rolling road tune-up
stage 2 chip
walbro fuel pump
mickey thompsons drag radial rear tyres
new smaller and wider alloys
suspension kit

ill post some updated photos soon thanxs:thumbs:

200sxslide

11-01-2008, 15:14

hi everyone after looking at my 200 sx over christmas it would seem that i need a new rear subframe, new tyres,new wings ,more rust to be welded,clucth still slipping ,loads more mods (to get a 13.0 1/4 mile 4 pro street ).so after having a think (yes it did hurt my brain)ive decided it would be cheaper and less time consuming to just buy a s13 with a blown engine and then just swap the engines over and all my other parts on to the new car my grey s13 will be broken for parts:cry:(ive got my eye on a white auto with blown engine near me :))so as and when all this happens i will update the thread with pics thanxs paul

p.s. if anyones got a s13 with a blown engine that needs work p.m. me thanxs :thumbs::Plug:

200sxslide

15-01-2008, 09:45

hi everyone have picked up the white auto shell and to be honest its not as described .its pretty rusty fist sized holes in both sidesills tailgates seen better days(whos hasnt) and the passenger rear wings completely rusted and holed wing mirrors broken drivers seats dosnt stay up (i look like one of those gangsta pimps lol)so i havnt quite decide wether to scrap or repair but either way ill post it up thanxs paul:thumbs:

p.s.funny but the air-con on it works brilliantly really cold lol:thumbs:

Matty2Fatty

15-01-2008, 16:34

bugger that sucks :( suppose you want some help with it? :D

200sxslide

16-01-2008, 00:22

bugger that sucks :( suppose you want some help with it? :D

hi matty yeah my crappy luck as usaul :(still i think its salvgable. yes mate feel free to come and help when u get some spare time lol hows ures running always seems to be on the drive when i go past :D?did u have a good crimbo and new year mate?chat to ya soon :thumbs:

Matty2Fatty

16-01-2008, 14:25

200sxslide

18-01-2008, 09:08

put it this way the last time i filled it with petrol was when we broke stidi's silvia (november i think?) & it's got half a tank of fuel still :rolleyes: but got the new pump and should be fixing it this weekend yay!! :D

MOT's due the same day though, which means i only get a day to drive it :(

hi mate so u only had to change the fuel pump and it took u this long lol:wack:if u need a hand let me know mate thanxs:thumbs::thumbs:

Matty2Fatty

18-01-2008, 16:35

na sorry it was a water pump i needed, should have specified :rolleyes:

200sxslide

22-01-2008, 09:18

na sorry it was a water pump i needed, should have specified :rolleyes:

oh ok mate well if u need a hand let me know :thumbs:

have now decided to break the white auto as it needs to much work so im going to have a few things off the car and then shes a breaker so if any one needs anything p.m. me with what u need thanxs :thumbs:

200sxslide

23-01-2008, 01:37

pics added:thumbs:

200sxslide

23-01-2008, 01:39

3" down pipe now fitted also bought some poly exhaust hangers:thumbs:

200sxslide

23-01-2008, 01:45

had to make myself a new boost pipe aswell (old rs turbo silicon hose kit i had laying around)so updated photo of my engine bay u can also see my new blue cam covers:thumbs:

Matty2Fatty

23-01-2008, 12:41

will this new pipe hopefully not pop then? :)

What you going to do about cars now then, get yet another one? you only just got rid of a white auto breaker, now you have another? :D :wack:

200sxslide

23-01-2008, 15:51

:thumbs:
will this new pipe hopefully not pop then? :)

What you going to do about cars now then, get yet another one? you only just got rid of a white auto breaker, now you have another? :D :wack:

hi mate yeah hopefully this will be up 2 the job lol:D

as for my car collecting conumdrum ill be keeping the grey one now mate im going take some spares off it for mine rear subframe is definately needed and brad and ash need plenty of spares for my old white auto shell so i guess it works out:wack::D:thumbs: