View Full Version : Grey S13 all parts available/ big ends gone
As above, Ed's big ends have gone and he has aquired another car, he is now breaking his car so absolutely everything is available. The only things i can think of that are not much good are the tailgate (rusted bad)/windscreen/ dash clocks (speedo works when it wants to).
Apart from that all the panels are good, the interior is not marked... turbo is fine.... and so on and so on....
Mail me and i will let ed know what is wanted, i can give prices as i will be taking the bits off the car and Ed hasnt got a clue..
Rob
has it got any go faster bit's on it?, what turbo's on it, and the price. cheers
Sorry guys n girls...
Forgot to add that it is an auto...
No trick bits i'm afaraid.....
Std Turbo etc..
Not sure how much the turbo's go for but would reckon on about £150..
Rob :)
have you got panels going??
if so is it a s13a (facelift)??
if that is the case then , are the following available:
Driver door inc wing mirror
driver side front wing
front bumper
absolutly complete rear bumper including the polystyrene bit inside and the housing for the bumper al;so the 200sx middle cluster bit and the bit that holds the rear number plate
Sorry mate not facelift as far as i know, it is the same as road kills (above)
All panels available
Rob
Or £300 for whole car???
Not sure how much the turbo's go for but would reckon on about £150..
Rob :) [/B]
:eek: :eek: T25 will fetch half this.
I'll give you £80 if it includes p+p
cheers
Quite suprised they go that cheap!!
£80 for a working /non smokin turbo ????
Sayin that though, if Ed doesnt manage to sell the car complete then £80 it is mate..
Rob
Mr_Sukebe
11-11-2002, 21:02
Can you please confirm the following:
- The nose is a pre-facelift
- That the nose section is in good condition
If the above two are both correct, how much?
I will confirm later today mate, deffo pre-facelift and has had no smashes but will check with ed that it is good cond..
What sort of money would you pay?? if condition is good..
Rob
Mr_Sukebe
12-11-2002, 06:26
Probably not that much mate, as it's only for aesthetic grounds, and it would need to be sanctioned by "she who must be obeyed".
gaz.thomas
12-11-2002, 10:46
I'll have the interior light and the rear section of boot trim carpet if available. PM me with what you're after for them.
Cheers
Gaz
-x-
shaunmac
12-11-2002, 11:00
how badly fooked are the big ends?
What was the rest of the engine like till they went? How much is he after for the engine & how many miles did it have on it?
Cheers,
Shaun
Reckon on £10+postage for the interior light and boot carpet mate..
Big ends are fecked!! sounds like a diesel with big ends gone :D
The engine has done 100k, no noise at all from top up to big end failure...
By the sounds of it i wouldnt reckon there is much chance of getting the crank reground and oversize shells as it does sound bad, literally went from tap tap to KNOCK KNOCK in about 5 miles.
I reckon it must have spun a shell bearing, the car has not been driven/started since, didnt want to send any metal bits through the turbo :eek:
Rob
realityx
13-11-2002, 14:34
just wondering you anywhere near london?
I,m after a spare tyre with rim and the original
wheel brace and jack winder ...have you got them,
if so how much?
Interested in the rear '200sx' reflector panel. Drop me a PM if Viper doesn't greab it :D
i'm going to take me tool box and leggit down there ;)
Really sorry about the lack of replies people.....
Could any enquiries Contact Ed direct on his mobile 07985084336
The car is at his house in harlow, essex..
Rob
Edited to add that Ed would take Offers around £250 to drive/take the car away..
neil240z
20-11-2002, 20:44
Howdy,
after a complete lock set if you have one? have mailed all the breakers for best prices!
regards
Neil
Ive been trying to get hold of Ed all weekend, but to no avail - I am desperados for a grey N/S front wing ............ all I need to get my little beauty back up and running :)
Let me know ASAP, Im only up the road in Cambridge so Ill dash down, pick it up and be dorifting the same evening (well, nearly .............;))
Cheers
turbocarslut
02-12-2002, 18:40
is this available?
http://www.eurostreetgraphics.com/powerchip.jpg
I went down to have a bit of a gander at this car and I have to say Im glad I did - the body is nigh on mint (better than mine anyway :rolleyes: ) and the interior is also in good nick. Cue many thoughts of "if only I had a spare engine", "if I had the space" etc. :rolleyes: :rolleyes:
Anyway, if you need anything other than a front wing, bootlid or manual gearbox (possibly what made me decide against the whole car - its an auto :eek: :eek:) ed has it and hes also a really nice bloke. drives like a ******* as well, so hes OK in my book ;)
neil240z
04-01-2003, 10:32
howdy,
I have a car with good engine box and its a manual if your interested?
only £100 too though it will need trailering away.
regards
Neil
Originally posted by neil240z
howdy,
I have a car with good engine box and its a manual if your interested?
only £100 too though it will need trailering away.
regards
Neil
still got the engine??? is it complete and what's the mileage roughly
cheers
Ed, what size are the front discs do you know? 280mm??
If bodywork is mint might be interested in taking the whole car. Any pics available?
neil240z
07-01-2003, 16:50
The engine in the car is very good, it is showing 146k on the clock but we had running prior to the turbo removal, there was no smoke and no rattles from the turbo or engine so its possible that it has been rebuilt/replaced.
there are also a lot of other parts which can still be sold on the car.
£100 is a bargain
regards
Neil
p.s Billy can confirm the engines condition as he as seen it running
I'd be interested in a drivers side door handle.
Just the lever, mine has a nick out of the back corner...
Cheers
Steve
gaz.thomas
17-01-2003, 15:38
If you're willing to go halves I need the surround - someone had a go at it with a screwdriver and cracked the section around the lock
Gaz
-x-
sounds like a plan Gaz...
I'd be up for that.
/Steve
gaz.thomas
20-01-2003, 08:31
Star
do you want to do the negotiating with Ed?
Gaz
-x-
Craig David
23-01-2003, 19:58
Has it got alloys?
I'm after some (preferably with tyres).
TC
gaz.thomas
24-01-2003, 09:35
How're we looking Steve?
Gaz
-x-
no response yet mate...:confused:
/Steve
mambastu
31-01-2003, 14:27
I need a pair of front hub flanges with studs and good bearings, have you got them at all ? They must be from an ABS car.
Can you PM me please :)
Do you have the passenger side wheel arch panel and liner for sale?
Originally posted by Ed S13
As above, Ed's big ends have gone and he has aquired another car, he is now breaking his car so absolutely everything is available. The only things i can think of that are not much good are the tailgate (rusted bad)/windscreen/ dash clocks (speedo works when it wants to).
Apart from that all the panels are good, the interior is not marked... turbo is fine.... and so on and so on....
Mail me and i will let ed know what is wanted, i can give prices as i will be taking the bits off the car and Ed hasnt got a clue..
Rob
Don't happen to have the ABS relays for the actuator one for the motor and one for the solenoid.
I need both.
Sorry about the lack of replies people, Could any enquiries be put to Ed on his Mobile 07985084336
I dont get much chance to check this and some of you may be missing out on bargains...
Both wings are now sold, two of the coil packs.. thats it
Tell you what, i am gonna head over to Ed's next week to strip the car down as much as we can.. mail me with the exact part you want and i will make sure that it comes off...
Rob
p.s. my email is rsoebx@hotmail.com
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.