s13 front door cards

[200 sx-treme]

how easy are these to remove,
cant find screws on the bottom of the doors like on a s14

[Stevecarter200]

One screw top front corner under a plastic cap, remove door release surround (just prise it off gently), screwin bottom of door handle under plastic cover, and once the handle is off there is another screw inside th hole. After that just pull it off, its on poppers down either side and the bottom edge.

[Kev]

Remember to unclip the door release handle surround too.

Ull probably need to wiggle the door card up and out, and be careful not to rip it right at where the little risen triangle that holds the mirror is:rolleyes:

Steve, what screw under the door handle?
Isnt there just the one under the little cap, then u pull the handle up and back, unclip the connector and thats it.
Or is it differant on post 92's?

Kev

[Stevecarter200]

Kev,


Originally posted by SteveCarter200
remove door release surround (just prise it off gently)

:p

Theres a screw at the top of the hole after the handle has been removed that goes through a metal plate thats attached to the door card into the door. Of course it may not have been put back in if the card has been removed before. Its there to stop the card flexing when you shut the door.

[200 sx-treme]

thanks for all you help lads shall be fitting some 6x9's in the door cards shortly,,,,,,,,,,,