G reg Breaking, bits and bobs available.

[Stevecarter200]

Offers taken on everything.....






Power steering pump
Heater Blower
Dropper resistor
Throttle position switch
Rear wiper amp
Headlight timer
Headlight pop up control unit
Radiator
Power steering resevoir
Det sensor
Rear ABS wheel sensor
Clock surround
Dash switches
Washer/Indicator stalks
Rear lights (vgc)
Interior bits
Headlights
Drivers Headlight mech/motor, no lid
Con rods


Buyer pays postage.

[Bug]

Motor any good...

You never know, I might be lucky and find a decent one.

Could I use my '92 inlet/ecu/lambda etc?

ta

:)

[Actual_Ben_Taylor]

Hows the gearbox? No I'm not swapping mine, its for a mate...

[philrob2000]

What condition is the suspension in ? I've got new springs but the rubber bung type washer things in the bottom of the struts are fooked (big time). :(

[Stevecarter200]

Bug, the engine is in bits. Pistons are fooked after some major detting.

Ben, AFAIK the gearbox is fine.

Philrob, the what??:confused:

[philrob2000]

:D :D
Not sure of the proper name for them. They're rubber bushes that fit in the bottom of the suspension leg where they attach behind the wheel. I spoke to Bren and he reckons that I might have to buy the whole unit. :( . Do you know what I mean yet ? :o ;) :confused: Like a rubber spacer.

[Stevecarter200]

Originally posted by philrob2000
:D :D
Not sure of the proper name for them. They're rubber bushes that fit in the bottom of the suspension leg where they attach behind the wheel. I spoke to Bren and he reckons that I might have to buy the whole unit. :( . Do you know what I mean yet ? :o ;) :confused: Like a rubber spacer.

Gotcha, on the rear struts, yes? Brens right I think. Andy Parker had his car fail an MOT due to these bushes on his KYB struts. I rang KYB for him and they dont sell them seperately, they are part of theshock. Sh1t innit.:(

[philrob2000]

Yep that's the ones M8. If the rear shocks are ok on the car your breaking can you give me price plz. Just got through MOT but not got a clue how. Mine are totally shot. :eek:

[Stevecarter200]

Originally posted by philrob2000
Yep that's the ones M8. If the rear shocks are ok on the car your breaking can you give me price plz. Just got through MOT but not got a clue how. Mine are totally shot. :eek:

I'll have a look at them tomorrow.

[SXOC Admin]

Don't suppose the tyres have decent tread?

[naeonlite]

Got the windscreen mate? How much do you want for it? I've got an MOT coming up soon and it ain't gonna pass like this...

[Stevecarter200]

Dave, how many tyres are you after? Ive got a pile of wheels and tyres in my back garden. Which style are you after?

Neon, sorry, the windscreen is fooked.

[JackaL]

Do you have, by any chance, an early style washer bottle, the small one with one pump?

I'm going to (finally) start fitting the FMIC on Tues or Wed next week, and it might be best to be prepared! :)

Cheers

[Stevecarter200]

Originally posted by JackaL
Do you have, by any chance, an early style washer bottle, the small one with one pump?

I'm going to (finally) start fitting the FMIC on Tues or Wed next week, and it might be best to be prepared! :)

Cheers

Yes I do!!

Drop me a mail.:)

[Dan@DB-Power]

Hi Steve

What are the front suspension struts like? As the gaiters on my struts have seen better days.

(Both the struty thingys inside the springy thingys on the front of the 200y)

Dan,

[Stevecarter200]

Originally posted by S13 Wannabe
Hi Steve

What are the front suspension struts like? As the gaiters on my struts have seen better days.

(Both the struty thingys inside the springy thingys on the front of the 200y)

Dan,

Umm, so are you needing the whole strut or just the gaiter inside? The gaiters are pretty shagged on the breaker but the shocks are good.

[Dan@DB-Power]

Same story here

The gaiters would have been nice if they were o.k.

But cheers anyway Steve.

[siranui]

What colour is the bodywork?

Also, what condition are the wing mirrors in..any scraches on the cases? et al?


Mike

[Stevecarter200]

Originally posted by siranui
What colour is the bodywork?

Also, what condition are the wing mirrors in..any scraches on the cases? et al?


Mike

The bodywork is white and unfortunately the mirrors have some scratches.

[kish]

Steve what colour is the car, Im after a whit bonnet and a white bootlid??

Cheers

Kish

[Stevecarter200]

Originally posted by kish
Steve what colour is the car, Im after a white bonnet and a white bootlid??

Cheers

Kish
yes, its white and its the early type white the same as yours. The hatch however is fooked.

[kish]

Steve, Ignore my email mate. Ive only just read your post.

Kish

[matticus]

Have you still got the turbo?

[Stevecarter200]

Originally posted by matticus
Have you still got the turbo?

Sorry mate, its sold.

[Squares]

Hey Steve,

Any chance you still have a driver side mirror for sale?............some A@SE H@LE M'THER FKCING BARTSUARD GIT FACED SQEAKY VOICED INCOMPETANT DRIVING HORSE SH@GGiNG 106 DRIVER smashed mine last night.

:mad: :mad: :mad: :mad: :mad:

It is just a normal electric black S13 one. Is it possible to just change the glass?

thanks mate,

sorry about the rant but this is sill a sore point because of his attitude and complete incompetence behind the wheel of a car, I cannot tell you how close I came to giving him the full benefit of over three years Thai boxing experience.:eek:

[Stevecarter200]

Originally posted by Screeeeeech
Hey Steve,

Any chance you still have a driver side mirror for sale?............some A@SE H@LE M'THER FKCING BARTSUARD GIT FACED SQEAKY VOICED INCOMPETANT DRIVING HORSE SH@GGiNG 106 DRIVER smashed mine last night.

:mad: :mad: :mad: :mad: :mad:

It is just a normal electric black S13 one. Is it possible to just change the glass?

thanks mate,

sorry about the rant but this is sill a sore point because of his attitude and complete incompetence behind the wheel of a car, I cannot tell you how close I came to giving him the full benefit of over three years Thai boxing experience.:eek:

Yep, I have a mirror, dont know about just swapping the glass.

[risky business]

Hi Steve
Do you have the hose that runs from the intercooler to plenum chamber?

[JasewithBase]

I'm in need of a starter motor - Do you still have it?

[yeager]

Mr C

I'm after the following, quote me if you please :)

1. Front nearside light cluster
2. Boot mechanism (mine just doesnt open when i flick the lever up front)
3. Leccy arial
4. You got an LSD on that ? I'm not sure if i've got one or not (waiting to put mine on a ramp) if I dont i'll be hunting one down.
5. Foxy chick to sit in my passenger seat (if you aint got one, dont worry, i'll hunt a few breakers for one)

Simon

[Stevecarter200]

Originally posted by yeager
Mr C

I'm after the following, quote me if you please :)

1. Front nearside light cluster
2. Boot mechanism (mine just doesnt open when i flick the lever up front)
3. Leccy arial
4. You got an LSD on that ? I'm not sure if i've got one or not (waiting to put mine on a ramp) if I dont i'll be hunting one down.
5. Foxy chick to sit in my passenger seat (if you aint got one, dont worry, i'll hunt a few breakers for one)

Simon

Hi mate.

Ive PM'd you about 1, 2 and 3. I havent got an LSD and any foxy chicks I find are mine, MINE I tell you!!!:D

[Squares]

Steve, is the rear suspension in sevicable nick?

I need some bits from the n/s but I am not sure what I have bent yet as I have not had time to start taking it to bits.:(
I assume it is the same as my 91 S13?
If you have I will have to pop down soon as I can get a lift and pick it up, as well as that drivers side mirror if you still have it.

ta mate,

PS any joy on the foxy chicks?;)

[Stevecarter200]

Originally posted by Screeeeeech
Steve, is the rear suspension in sevicable nick?

I need some bits from the n/s but I am not sure what I have bent yet as I have not had time to start taking it to bits.:(
I assume it is the same as my 91 S13?
If you have I will have to pop down soon as I can get a lift and pick it up, as well as that drivers side mirror if you still have it.

ta mate,

PS any joy on the foxy chicks?;)

Ive got the bits apart from the rear hub. I'm using the suspension arms myself at the mo, Ive fitted Powerflex bushes in them but will soon be swaping with the arms on my car. Ive still got the mirror.

Foxy chicks? No.:(

[Squares]

5. Foxy chick to sit in my passenger seat (if you aint got one, dont worry, i'll hunt a few breakers for one)

get it???...

Ok, so you have basically rebuilt the spare arms you had to bolt to your car and when you have done that you will be selling your ones? Is that it?

Ok, next question my friend is when?....I have had a look at my motor today but whatever is bent will only be located when taken off and compared to a straight one I think.:(

Were you planning on fitting them soon?

thanks, mate.;)

[Stevecarter200]

I'm hoping to get round to it next week.

[Squares]

Smooth, let me know as soon as Steve.

How much you after for the right side?..not to be confused with the darkside.:D

[Stevecarter200]

Originally posted by Screeeeeech
Smooth, let me know as soon as Steve.

How much you after for the right side?..not to be confused with the darkside.:D

Depends which bits you need, no point in you having the entire assembly, the postage would be horrendous.

Let me know what bits you need mate.

[Squares]

Will do, your not more than an hour away anyhow.

Will let you know.

thanks.;)

[Mike Martin]

Hello Steve,

Have you got the rear wiper unit, does it work and how much would it be.

[Stevecarter200]

Originally posted by Mike Martin
Hello Steve,

Have you got the rear wiper unit, does it work and how much would it be.

The rear wiper motor? Thats been sold I'm afraid.

[Mike Martin]

OK, what about passenger door lock/handle unit?

PS Someone mentioned that you could be the man to talk to about replacing the FU turbo on my S13 if the price is right. Is this right?

[Stevecarter200]

Originally posted by Mike Martin
OK, what about passenger door lock/handle unit?

PS Someone mentioned that you could be the man to talk to about replacing the FU turbo on my S13 if the price is right. Is this right?

Yep, Ive got a passenger door handle/lock.

Drop me an email about this and the turbo.:)

[royles]

Hi, I have a cracked indicator lense so this would be great if its available (passenger side front).
Also the parcel shelf would be of interest.

I can be contacted at sx200@royles.net

regards, Royles

[PAUL NEWMAN]

steve have you got two standard rear shocks

[Stevecarter200]

Originally posted by PAUL NEWMAN
steve have you got two standard rear shocks

Yep.:)

Drop me a mail.

[Yak]

Have you get this rubber bung that I've lost?

See.... http://www.sxoc.com/vbb/showthread.php?s=&threadid=21214

[arseout84]

Hi steve,
I'll like that det sensor.....in dire need

pm me your address and i'll post on a bank draft. If its still for sale that is

thanks

[Stevecarter200]

Yak, sorry mate, havent got it.

Arse:), Yep, Ive still got it, condsider yourself PM'd.

[kiteboy]

Have you got the glass window for the left side door? Some little b!@#$%^ds broke into my mota during the week. Also can you list the body panels you still have available. Cheers:)

[Stevecarter200]

Originally posted by kiteboy
Have you got the glass window for the left side door? Some little b!@#$%^ds broke into my mota during the week. Also can you list the body panels you still have available. Cheers:)

Yep, Ive still got the glass you need. Yours for £25 plus delivery or you pick it up.

I still have both doors, the bonnet, front and rear bumpers, o/s wing(slight dent), rear trim panel, headlight covers and both rear lights.

[Mike Martin]

Steve,

Have you still got the car and taking bits off it or have you stripped the bits and only have them left. The reason I ask is that I'd like to look at it to see if there are bits that might be on it that I need.

Actaully this is a silly question cos i'll be able to look myself next Friday,woohoo.

[Stevecarter200]

Originally posted by Mike Martin
Steve,

Have you still got the car and taking bits off it or have you stripped the bits and only have them left. The reason I ask is that I'd like to look at it to see if there are bits that might be on it that I need.

Actaully this is a silly question cos i'll be able to look myself next Friday,woohoo.


I got rid of the car ages ago but feel free to have a browse when you are here.:)

[Mike Martin]

Cool, I'll see ya next Friday, early.

I'll e-mail you tocheck if I've got the right address for Multimap.

[Stevecarter200]

Still got loads of bits, roll up, roll up, get your S13 bits here!!:)

[R33_Drifter]

Have you got an electric aerial Steve ??

[Stevecarter200]

Originally posted by AdeGT4
Have you got an electric aerial Steve ??

Ive got a good motor but it hasnt got a mast attached.

[tom]

Has the windscreen gone yet if not how much?

[Stevecarter200]

Originally posted by tom
Has the windscreen gone yet if not how much?

Sorry, no windscreen.

[Miggy]

Got the center head-unit surround thing?

And while im at it, whats the milage on the clock?

[neil240z]

Steve,

Pm'd you but your inbox is full!

cheers

Neil

[Stevecarter200]

Originally posted by Miggy
Got the center head-unit surround thing?

And while im at it, whats the milage on the clock?

Havent got the clock set anymore. Or the surround thing. Soz.

[andypat]

steve I,m after the rubber seal for the t/gate dont suppose you,ve got one laying about? :D :D

[Stevecarter200]

Originally posted by andypat
steve I,m after the rubber seal for the t/gate dont suppose you,ve got one laying about? :D :D

Sorry mate, no.:(

[turbocarslut]

http://www.eurostreetgraphics.com/powerchip.jpg

does anyone have this?

[*Albino*Batman*]

need drivers side front wing, inner arch, bonnet all white for pre-facelift

PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE

[andyf]

albino, gimme a shout :)

[Stevecarter200]

Originally posted by andyf
albino, gimme a shout :)

OY!!!

Fogg!! Get orf moi laaaand!

:D

[andyf]

Yikes, the Farmer is out and about :D

/me dodges the shotgun

[BaNzAi]

Need front drivers side Lght lifter / motor

have you got one of those left ?

preferably as complete as possible

if so how much ;-)
please

[pauly]

Have you got the two furry panels which go down the sides of the boot. The ones which tuck being the rear seat back and are shaped to cover all the metal work. and hold the boot light one one side, and access to the jack on the other.

I'm interested if they are in good nick.

ps, if you do have them, are they in Colchester ?

Paul.

[Stevecarter200]

Originally posted by BaNzAi
Need front drivers side Lght lifter / motor

have you got one of those left ?

preferably as complete as possible

if so how much ;-)
please

Yep, Ive got the motor. Do you need the mechanism as well?

Drop me an email mate.

Ta.

[Stevecarter200]

Originally posted by pauly
Have you got the two furry panels which go down the sides of the boot. The ones which tuck being the rear seat back and are shaped to cover all the metal work. and hold the boot light one one side, and access to the jack on the other.

I'm interested if they are in good nick.

ps, if you do have them, are they in Colchester ?

Paul.

Sorry mate, havent got them. Try Dan S13 he has a complete car to rip apart whereas Ive just got the bits Ive removed and the shell has been scrapped.

[Big Al]

coolant hoses. I need em. I'm gonna cry if i can't get some. Bought my car thurs, broke it sunday. Wanna drive it. I need all the coolant hoses that run under the inlet manifold by the starter motor. Theres 4 i think. PLEASE

[Stevecarter200]

Originally posted by Big Al
coolant hoses. I need em. I'm gonna cry if i can't get some. Bought my car thurs, broke it sunday. Wanna drive it. I need all the coolant hoses that run under the inlet manifold by the starter motor. Theres 4 i think. PLEASE

You have a PM.

[puffin]

Originally posted by SteveCarter200
Pretty much everything available.


Clutch master cylinder £30
Brake master cylinder £40
Alternator £30
Starter motor £30
Power steering pump £30
PAS rack £50
Heater Blower £30
Viscous fan (x2) £10 each
Dropper resistor £10
Ignition power amp £15
Crank angle sensor £40
Throttle position switch £20
Rear wiper amp £5
Headlight timer £5
Headlight pop up control unit £5
Radiator £40
Power steering resevoir £5
Det sensor £15
ABS pump £?????
Rear ABS wheel sensor £20
Clock surround £10
Passenger Mirror £20
ABS ECU £65
Electric window module £5
Owners manual £5
Dash switches £5 each
Washer/Indicator stalks £10 each
Rear lights £30 each (vgc)
Interior (drivers seat worn, rest vgc) - offers
Headlights £15 due to condition, each
Drivers Headlight mech/motor £30
Bonnet £40 (good condition)
Passenger Electric window mech & motor £40
Con rods £25 each


Open to offers on all parts. Buyer pays postage.


More to come later when Ive removed them.

Do you have a working ECU by any chance and what price?

[mikesx]

Has the car got working instruments (clocks)?

If so, can ou advise how much for them?

Thanks

Mike

[Stevecarter200]

Originally posted by mikesx
Has the car got working instruments (clocks)?

If so, can ou advise how much for them?

Thanks

Mike

Sorry mate, they have been sold.

[Stevecarter200]

Originally posted by puffin
Do you have a working ECU by any chance and what price?

Yep, Ive got one but its from a cat/lambda equipped S13. £30 any good to you?

Can you email me if youre interested?

Thanks.

[BaNzAi]

SteveCarter200 did you get me e-mail
?????

[Stevecarter200]

Originally posted by BaNzAi
SteveCarter200 did you get me e-mail
?????

Umm, no.:(

Can you send again please?

steve@carter200.fsnet.co.uk

[puffin]

Originally posted by SteveCarter200
Yep, Ive got one but its from a cat/lambda equipped S13. £30 any good to you?

Can you email me if youre interested?

Thanks.

Price is good but I don't have a cat on mine so I think it will not be compatable.

Thanks for getting back to me though.

[vader]

which company do you use 2 send your bits?????

[puffin]

Originally posted by vader
which company do you use 2 send your bits?????

Sorry I don't know. Why?

[vader]

Originally posted by vader
which company do you use 2 send your bits?????


sorry puffin that was to steve

[puffin]

Originally posted by vader
sorry puffin that was to steve

Have to admit it did confuse me a little.

That is why I thought you were getting bored with this saga.

no probs mate

[Stevecarter200]

Originally posted by vader
which company do you use 2 send your bits?????

If they are small parts then I bung them through the post office. If they are large heavy parts I use a friend that runs a car parts shop and he posts them for me a fair bit cheaper that the royal mail.

[deano]

hi steve , dont suppose youve got a prop center bearing carrier have you :)

[Stevecarter200]

Originally posted by deano
hi steve , dont suppose youve got a prop center bearing carrier have you :)

I'm not sure but I'll have a look. You mean the U shaped brackety bits that hold the prop up?

[deano]

yes mate its the top bit i want,the mechanic who did my clutch kindly left it off

[puffin]

how come I keep getting messages for steve carter????

[Stevecarter200]

Originally posted by puffin
how come I keep getting messages for steve carter????

I think you had subscribed to this thread so every time there was a new post you'd get an email telling you so.

Ive changed your settings so it shouldnt happen any more.

[puffin]

Originally posted by SteveCarter200
I think you had subscribed to this thread so every time there was a new post you'd get an email telling you so.

Ive changed your settings so it shouldnt happen any more.

Chhers mate

[Delboy]

ok long shot, but I dont suppose the tailgate is in good nick is it (rust free and undamaged??) Bought my S13 a few months back and the tail gate had some visible rust but thought it was fixable, a complete monkey of a bodywork mechanic then promptly ruined it. If its ok how much?

[Stevecarter200]

Originally posted by Delboy
ok long shot, but I dont suppose the tailgate is in good nick is it (rust free and undamaged??) Bought my S13 a few months back and the tail gate had some visible rust but thought it was fixable, a complete monkey of a bodywork mechanic then promptly ruined it. If its ok how much?

Sorry mate, didnt keep the hatch as it was as rusty as a very rusty thing.

[Delboy]

Arent they all!! Oh well, the search goes on...

[crackdownuk]

any idea of the P+P on the RAD??? thanks

[Stevecarter200]

Originally posted by crackdownuk
any idea of the P+P on the RAD??? thanks

£10 I reckon.

[luke 200]

Hi Steve,

I'm after the front section of wheel arch liner (passenger side).
Any Chance?

Cheers Mate,

Luke.:)

[Stevecarter200]

Originally posted by luke 200
Hi Steve,

I'm after the front section of wheel arch liner (passenger side).
Any Chance?

Cheers Mate,

Luke.:)

Fraid not.:(

[puffin]

Originally posted by SteveCarter200
Fraid not.:(

I am still getting your prompts re threads. Not that it upsets me but I am concerned that you may be missing out.

PS nobody seems to have any relays for the ABS actuator. I think I am going to cry!!!!!:D

[luke 200]

Originally posted by SteveCarter200
Fraid not.:(

Doh! No worries,
Cheers,
Luke:)

[Pete C]

Got a decent S13 gearbox Steve? As posted in S13 tech, mine seems to be on it's way out...

[Stevecarter200]

Originally posted by Pete C
Got a decent S13 gearbox Steve? As posted in S13 tech, mine seems to be on it's way out...

Fraid not mate, soz.

[philrob2000]

Helo Steve. Have you got a spare coolant hose that goes from under the throtle butterfly thing to round the back of the engine near the top. (Note the highly technical description):confused: :)

[puffin]

Originally posted by SteveCarter200
Fraid not mate, soz.

Hi Steve,

I still seem to be getting your mail for some reason or other.

As I say I don't mind but you may be missing out

Puffin

[tbk]

Hi there bud,

Have just removed the engine and have found during this we have caused damage to the coolant pipe that comes from the turbo to the side of the main block, was wondering if you had this left and how much you would want for it?

Cheers

Kings

[Stevecarter200]

Originally posted by philrob2000
Helo Steve. Have you got a spare coolant hose that goes from under the throtle butterfly thing to round the back of the engine near the top. (Note the highly technical description):confused: :)

Sorry mate, I dont think Ive got it.

[Stevecarter200]

Originally posted by tbk
Hi there bud,

Have just removed the engine and have found during this we have caused damage to the coolant pipe that comes from the turbo to the side of the main block, was wondering if you had this left and how much you would want for it?

Cheers

Kings

Just had a look and I havent got one, sorry.

[tbk]

thanks anyway bud

[philrob2000]

Cheers anyway Steve.

[milo]

Just PM'd you Steve.

Cheers...Mike.

[Stevecarter200]

Originally posted by milo
Just PM'd you Steve.

Cheers...Mike.

PM'd you back.

[Dai]

Has the Rad gone ??

Is itfrom an auto or manual ??

Cheers

Dai

[Stevecarter200]

Originally posted by Dai Boy
Has the Rad gone ??

Is itfrom an auto or manual ??

Cheers

Dai

Ive got 2 rads, one in the normal black and one crappily painted a lovely shade of red, which would you prefer?

Ooops, Edit: They are both manual. Any good to you? Or are you looking for an auto to use as a engine oil cooler as well?

[Dai]

Yeah, sorry steve, looking for an auto one to do the oil cooler thingy,

cheers anyway, and cheaques in the post;)

[Ribo]

Hi Steve,

Have you still got the knock sensor?

Cheers

Bryn

[Stevecarter200]

Originally posted by Ribo
Hi Steve,

Have you still got the knock sensor?

Cheers

Bryn

Yes mate, you have a PM.

[hubby]

LOOKING FOR A DRIVERS DOOR ELCTRIC WINDOW MECH.IN WORKING ORDER.

[Vronsky]

Steve,
Am looking for a diff in good order, either LSD or none.
Can you help me?

Thanks.

[Scooter]

Hello steve

Youv'e got a million messages on this thread so i don't knowif anyone has allready asked you for this. I couldn't be arsed to look though them all.

I'm after the switch for the windows on the drivers door.

Thanks

Scooter

reg3210@hotmail.com
07944 541051

[Craig David]

If so, let me know;

tim.cummings@emap.com

[Stevecarter200]

Originally posted by hubby
LOOKING FOR A DRIVERS DOOR ELCTRIC WINDOW MECH.IN WORKING ORDER.

Blimey, only just seen all these.:o

Sorry, only got a passenger side mech.

[Stevecarter200]

Originally posted by Vronsky
Steve,
Am looking for a diff in good order, either LSD or none.
Can you help me?

Thanks.

Sorry, no diff.

[Stevecarter200]

Originally posted by Scooter
Hello steve

Youv'e got a million messages on this thread so i don't knowif anyone has allready asked you for this. I couldn't be arsed to look though them all.

I'm after the switch for the windows on the drivers door.

Thanks

Scooter

reg3210@hotmail.com
07944 541051

Yep, Ive got a drivers window switch panel.

I'll drop you a mail.

[Stevecarter200]

Originally posted by Craig David
If so, let me know;

tim.cummings@emap.com

Sorry, no rear shocks.

[Pete C]

Bit of a strange one this Steve, but just on the off chance, I need the wiring connector for the det sensor?

Pref with some wire still connected to it so I can splice it on to mine, 'cos it's knackered :(

Cheers :)

[Stevecarter200]

I'm afraid its a 'no' to both of you, sorry.

[Pete C]

Have you got a decent CAS, Steve? :)

[Stevecarter200]

Originally posted by Pete C
Have you got a decent CAS, Steve? :)

Sure as shit have Pete. Drop me a PM.:)

[Pete C]

Originally posted by SteveCarter200
Sure as shit have Pete. Drop me a PM.:)

Jas is sending me one that might be ok for free - if it's not I'll PM ya, cheers :)

[dystemper]

Hi Steve - do you have the nissan-side stereo electrical plugs with enough wiring on. I need the plastic units which plug into the ISO connector as the previous owner cut plugs off and wired in tons of extra stereo equipment, now of course theres just a bunch of bare wires!

connecting an original block back to it would be the easy way of solving it i think.

[Stevecarter200]

Originally posted by dystemper
Hi Steve - do you have the nissan-side stereo electrical plugs with enough wiring on. I need the plastic units which plug into the ISO connector as the previous owner cut plugs off and wired in tons of extra stereo equipment, now of course theres just a bunch of bare wires!

connecting an original block back to it would be the easy way of solving it i think.

Fraid not mate, my car is exactly the same.:(

[Pete C]

Hi Steve - I need a front ABS sensor if you've got one please :)

It's for the nearside if that makes any difference, but they look the same to me.

[Stevecarter200]

Originally posted by Pete C
Hi Steve - I need a front ABS sensor if you've got one please :)

It's for the nearside if that makes any difference, but they look the same to me.

Sorry mate, my heavy handed friend that helped me strip the car fooked them up when they were removed.

[Jeff]

Steve, do you still have the glovebox available? Was the trim the same on all prefacelifts? Just checking it's gonna match :) If you do have it, I don't spose their's any chance you could take it to Billing for me could you? No problem paying you up front for it.

Cheers - Jeff

[Stevecarter200]

Originally posted by Jeff
Steve, do you still have the glovebox available? Was the trim the same on all prefacelifts? Just checking it's gonna match :) If you do have it, I don't spose their's any chance you could take it to Billing for me could you? No problem paying you up front for it.

Cheers - Jeff

Pretty sure Ive still got it, I'll bring it to Billing and we can talk money then.:)

[digiruss]

Hi Steve

desparately in need of a passenger side front wing - do you still have one on the car you are breaking?

Russ Brown

[Sx.s13.Marc]

need a full exhaust with cat pipe if ya got 1:whip:

[Stevecarter200]

digiruss, sorry mate, no wing.


Sx.s13.Marc, I have a fulle xhaust, I think, but I think its a non cat car. Not that it makes any difference of course.

[Ribo]

Hi Steve,

Do you happen to have a cigarette lighter socket (and wiring), and/or an air regulator outlet ( the square black cap thing below the throttle that has a hose connector for the idle breather )?

Cheers

Bryn

[Stevecarter200]

Originally posted by Ribo
Hi Steve,

Do you happen to have a cigarette lighter socket (and wiring), and/or an air regulator outlet ( the square black cap thing below the throttle that has a hose connector for the idle breather )?

Cheers

Bryn

Hi

Yeah, pretty sure Ive got both of them. Drop me an email please mate.:thumbs:

[SteveSadler]

window switch

S13
Electric Window Switch - Drivers side (O/S)

mines being a pain and not functioning properly so anyone got one for grabs that they wanna let go for nice n cheap??

Thanks in advance

Steve

[Matty2Fatty]

Howdy

Do you have the metal trim that goes over the top of the door, it goes along the windscreen then along the top of the window.
I need a new passenger side one as some loverly person has bent mine while attempting a break in.

Cheers

Matt

[Monkey_200SX]

nearside wing mirror still going?

[Stevecarter200]

Originally posted by Monkey_200SX
nearside wing mirror still going?

Yes but its pretty badly scratched. If you are desperate for one you can have it for the cost of postage.

[SteveSadler]

black relay held on with 2 screws

im after the small black relay inside the drivers door.

the wiring loom plugs into it. it controls the window.

can you spare it? pretty please. someone else was supposed to
send me one but it never reached!

Cheers!!

Steve

[Stevecarter200]

Originally posted by SteveSadler
black relay held on with 2 screws

im after the small black relay inside the drivers door.

the wiring loom plugs into it. it controls the window.

can you spare it? pretty please. someone else was supposed to
send me one but it never reached!

Cheers!!

Steve

Sorry mate, thats already gone.:(

[thespurs]

dont suppose u got any speedos abouthave you please

[Stevecarter200]

Originally posted by thespurs
dont suppose u got any speedos abouthave you please

Sorry mate, no.

[Ally McC]

Hi Steve,

Do you have a 'cage' / metal frame that the stereo and cubby thing attach to?

Ally

[crackdownuk]

hi steve dont surpose you got a T25 left have you??

thanks

[Stevecarter200]

Originally posted by crackdownuk
hi steve dont surpose you got a T25 left have you??

thanks

Fraid not mate but Ive got a T28 that has a damaged exhaust wheel.

[McRearout]

Do you have the one way valve out of the breather system up near the clutch fluid resevoir?

Sorry if its already been covered but I couldn't read through 8 pages!

Cheers,
Stu.

[Stevecarter200]

Originally posted by McRearout
Do you have the one way valve out of the breather system up near the clutch fluid resevoir?

Sorry if its already been covered but I couldn't read through 8 pages!

Cheers,
Stu.

Fraid not mate but try a breaker S14, they have them in the cam cover, specifically for the breather system.

[McRearout]

will do, cheers

[Adman]

Have you got the boost pipe that connects to the e.c.c, if so how much do you want for it:thumbs:

[Stevecarter200]

Sorry, no.

[AARON A]

Hello Steve wander if you can help me do you still have a gear box for an s13 and how much please. Mines getting a bit noisy! Also do you have front hubs, bearings and discs with or without suspension legs. ( trying to get rid of recuring brake judder and 2 sets of discs and had em skimmed once keeps coming back)
Also need a rear shock can't remember which side! Thanks a lot
ps:If u don't have g box any idea how much i should expect to pay for one cheers

pps: hope u can help i' ve only got to come from felixstowe

[Stevecarter200]

Originally posted by AARON A
Hello Steve wander if you can help me do you still have a gear box for an s13 and how much please. Mines getting a bit noisy! Also do you have front hubs, bearings and discs with or without suspension legs. ( trying to get rid of recuring brake judder and 2 sets of discs and had em skimmed once keeps coming back)
Also need a rear shock can't remember which side! Thanks a lot
ps:If u don't have g box any idea how much i should expect to pay for one cheers

pps: hope u can help i' ve only got to come from felixstowe

Sorry mate, I havent got any of those bits. All the bits Ive got left are in the first post.

[braz]

Looking for a starter motor and heater blower if you have them cheers.


:smash:

[Stevecarter200]

Originally posted by braz
Looking for a starter motor and heater blower if you have them cheers.


:smash:

Cant help with the starter but I might be able to dig out a heater blower, I vaguely remember removing one. I'll get back to you.

[braz]

Cheers:thumbs:

[tross]

hi steve, have you by any chance got a brake switch? managed to get my rltc sorted at the weekend so thought i'd try the free full throttle shift upgrade

cheers mate :)

[Stevecarter200]

Originally posted by tross
hi steve, have you by any chance got a brake switch? managed to get my rltc sorted at the weekend so thought i'd try the free full throttle shift upgrade

cheers mate :)

Fraid not mate.