View Full Version : stage 3 with topmount t3
Imissyoumy7
24-11-2005, 19:43
Will a stage 3 chip work with a topmount t3dual bb turbo?
Anyone?
best ask jez, wouldn't have thought so though,
Ooops please ignore as I thought I was in S14 technical.
Imissyoumy7
24-11-2005, 19:48
forgot to mention
The turbo is capable of 400 bhp
1.7 bar @ 2700rpm
Sp00ls up like a Mof0
wich turbo is that, come on details:)
Imissyoumy7
24-11-2005, 19:58
42 cold a/r • .48 Hot • 2" OUTLET • Great Turbo for 1.6L to 1.8L engines • Spools on a 1.7 @2700 • TURBINE WHEEL: EXDUCER: 1.81", MAYOR : 2.48" • COMPRESSOR WHEEL: EXDUCER: 1.67", MAYOR : 2.36"
http://www.ssautochrome.com/level.itml/icOid/images/Mvc-0ewcx719f_c.jpg
butcherbrown
24-11-2005, 19:58
best check with jez 1st as said above.
i reckon it could be possible on lower boost, but surely a custom map will be your best bet.
im using the t4'0' trim turbo on my sr20 with a jez stage 3 chip and it works very :nod: and thats maped for a t28rs:nod:
Imissyoumy7
24-11-2005, 20:52
So you recon it'l work? f0 me?!
it doesnt make 1.7 bar at 2700rpm it spools at 2700 rpm on a 1.7 liter engine
Imissyoumy7
24-11-2005, 21:00
I see it now yes. but the surge graph says it can produce 1.7 or 1.8 bar
mine starts to spool under 3000 and hits 1.4 bar at 4000, also you need to ask jez but i see no problem as long as you do not exceed the recomended boost for the chip settings
Imissyoumy7
24-11-2005, 21:11
I want to fine tune it with an emanage ultimate
Hi mate
I can provide you chip for T3 turbo,you have PM:thumbs:
playworker
25-11-2005, 08:31
It's a pretty small compressor housing, doubt it'll make 400bhp TBH - I'm not a turbo guru though so I could be wrong :wack:
I'm running a T3 but a "Super 60" trim with a .60 a/r housing and it runs fine with Jez's Stage 3 chip - could probably do with some fine tuning with an SAFC or similar but it runs fine :)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.