PDA

View Full Version : Will this Z32 AFm Work


22-11-2005, 13:40
Hi, just wondering if this Z32 Afm will be compatible with my S13 (pre face lift) stage 3 chip, 444cc injectors.

http://cgi.ebay.com/ebaymotors/300zx-Mass-Air-Flow-Meter-AFM-MAF-Z32-HKS-SR20DET_W0QQcmdZViewItemQQcategoryZ33742QQitemZ801 5957907QQrdZ1QQsspagenameZWD2V

Any help would be appreciated:)

Adam
arry
22-11-2005, 13:41
which Z32 AFM is that then? :D
22-11-2005, 13:45
LOL Arry u never miss a thing. After I posted this thread I immediately realised I had forgotten the link. I must of took 1 min to edit but STILL you had already pounced on it!!:D

Bump:thumbs:
22-11-2005, 14:03
Or................are you saying that there is only one Z32 AFM and it will work??:confused:
dunc
22-11-2005, 14:06
Any z32 AFM is suitable to my knowledge :thumbs:
arry
22-11-2005, 14:08
that one looks fine mate, will be fine :thumbs:
22-11-2005, 14:08
sound, thanks Dunc, also im not sure what sort of price I should be looking at used or new?? Any indication?
arry
22-11-2005, 14:09
usually go for around £100 over here.
22-11-2005, 14:11
Excellent, cheers guys. I just need to find out how much shipping will cost and eta on arrival etc:)
arry
22-11-2005, 14:13
One thing, dont forget to work out your air filter options before you decide to fit it :D
22-11-2005, 14:15
Good point arry, i havent even thought about that? Will it be compatible with a K&N induction set up??
Luke
22-11-2005, 14:15
Excellent, cheers guys. I just need to find out how much shipping will cost and eta on arrival etc:)

remember import duty too matey... unless you're lucky enough for them to give you it as a 'gift' ;) ... + you sometimes get a handling fee on top depending on who's the courier.

Luke
arry
22-11-2005, 14:15
Umm, I dont know cos there's quite a few different K&N Setups. Should be able to modify it to make it fit
22-11-2005, 14:17
Umm, I dont know cos there's quite a few different K&N Setups. Should be able to modify it to make it fit

Yeh sounds good, ive got one of them large hammers in the garage just incase.

It always does the trick :D
22-11-2005, 14:19
remember import duty too matey... unless you're lucky enough for them to give you it as a 'gift' ;) ... + you sometimes get a handling fee on top depending on who's the courier.

Luke

Yeh im going to wait for him to tell me how much shippping will cost etc? I like the idea of the gift........well Christmas IS on its way?!? ;)
dunc
22-11-2005, 14:28
Will it be compatible with a K&N induction set up??
300zx Z32 K&N cone filter or a different type with adapter to fit (I redrilled my CA18DET filter adapter).

Dunc.
22-11-2005, 14:32
300zx Z32 K&N cone filter or a different type with adapter to fit (I redrilled my CA18DET filter adapter).

Dunc.

Im not sure I follow but im sure it will make sense when I go to fit the parts!:)
dunc
22-11-2005, 15:00
A z32 cone filter kit will fit straight onto the z32 AFM as you'd expect. If you already have a cone filter you wish to fit onto the z32 AFM then an adapter plate of some description will be required.

Hope that makes more sense? :)

Dunc.
dunc
22-11-2005, 15:02
This might help?

http://www.sxoc.com/vbb/showthread.php?t=178244&highlight=z32+AFM

Dunc.
22-11-2005, 15:12
This might help?

http://www.sxoc.com/vbb/showthread.php?t=178244&highlight=z32+AFM

Dunc.

Superb!:eek:..................crystal clear now, thanks Dunc
dunc
22-11-2005, 15:30
No probs :)