Bits - Kouki's, oil cooler, Greddy gauges etc

[paul180sx]

Haven't put a lot of thought into this yet, so not everything's priced. I've decided to sell my car + stock of bits (see my post in 'cars for sale'). It's all going on ebay later so there will be some pics. Anybody interested in any of this?

1. Set of genuine Kouki rear lights for S13. Includes 2X panels, 2x lenses and all the bulb holders - both panels sprayed silver. One of the lenses has a crack in it, but at the edge and not on the round bit. I've filled the crack and my idea was to either tint the whole thing to cover up the repair or just do the outsides black and leave the round bits clear red - kind of like Skyline lights. Or you could buy a new lens for £90. I was thinking about £200 ish?? Needs to be collected really. SOLD

2. S13 Oil Cooler Kit - brand new 13 row cooler, brand new Mocal stainless steel braided hoses, used but tested ok thermostatic sandwich plate. £100 + delivery? -SOLD

3. S13 complete set of Energy Suspension rear poly bushes - brand new ordered from Courtesy Nissan in the States but never used. Offers? - SOLD

4. S13 front TC Arms c/w poly bushes. Replace the big fluid-filled jobs. SOLD

5. Stainless steel twin-pipe turbo downpipe - T28 / SR20 type thing. Brand new, never used. £60? - SOLD

8. GReddy 52mm electric temperature gauge - oil or water. Brand new, boxed. Black face - SOLD

9. GReddy 52mm electric oil pressure gauge. Brand new, boxed. Black face -SOLD

10. GReddy alloy turbo exit pipe. Goes between the turbo and the intercooler. This is an absolutely perfect fit for an S13 with a T28 fitted as it's actually designed for the SR20 180SX. Brand new, boxed. -SOLD

11. S13/ CA18DET Borg + Beck/ Exedy Clutch + new Nissan release bearing. Bought it off someone on here - who was that? can't remember :-) Used to belong to Jez (Horsham) apparently. I've never used it - done about 60,000 miles. I paid £60 delivered - similar offer? Do a search, you'll probably be able to trace its history - SOLD

12. Genuine HKS Super Drager 5" / 130mm tailpipe. This is a Skyline tailpipe that has been cut off. Can definitely be made to fit an S13. I posted a pic of it attached to my car a while back - I'll find it in a while. SOLD

12. Porsche 944 turbo FMIC modified to fit a S13 - again there's a pic of it attached to my car somewhere on here that I'll find shortly. It fits perfectly between the uprights at the front of a pre facelift S13 and right in the hole in the bumper. It cost me about £150 all-in. Tested ok at 30psi. Offers? Pic soon ..

13. Standard S13 alloys + crap but legal tyres. Could be useful for drifting ?NOW FREE to whoever wants to come and get 'em. - TOO LATE, GONE TO THE TIP ...

14. set of standard size wheel studs - offer

15. Set of standard size locking nuts - offer

16. GReddy Turbo timer - old style - matches Profec B, black. bit tatty but works fine. Offers?

There may be more ...

[paul180sx]

FMIC

http://www.imagestation.com/picture/sraid121/p3aee9afe4bf41cfbd1ca7c9734d0f034/f84b0ca7.jpg

Tailpipe

http://www.imagestation.com/picture/sraid121/pa09a621c0cf0f946047b4d673ca75544/f84b0ca9.jpg

[Insomniac]

I'm interested in the koukis, could you post pics so I could see the condition of the lights and how bad the crack is?

Also, what colour silver is it? Is it the Nissan Purplish Silver Metallic?

[Dan@DB-Power]

HI Mate

Interested in the intercooler, does it come with the pipe work? If so have you got a pic of the pipe work in the engine bay?

Cheers
Dan

[Edreamsz]

Hi,

I'm also interested in the intercooler and the borg en beck clutch plus release bearing.

Can you ship them for me to holland? I live in rotterdam and payment can be made by paypall. Hope you have and account :)

Are you selling only a clutchplate and rel.bearing. Or is there also a clutch cover?

Intercooler would be perfect if it comes with piping.

Cheers

Hubert Salas

[NICK SOUTH LOND]

2nd dibbs on kouki's

Could you email pics and as above cheers

[paul180sx]

OK Guys

A few people have asked for pics of the Kouki lights. Rather than reply to all the private messages, I'll put up some pics in here asap. Dan, yes I would say it was that purply silver - they were silver when I bought them, so I can't tell you how good a match they are for that colour car I'm afraid. I was going to have them resprayed black.

Similarly, a few people have asked if I have intercooler piping. I'm afraid I don't. I have a bunch of swaged alloy bends and some silicon hose I was going to cobble it together with, but it doesn't really constitute a piping kit.

I spotted this on ebay earlier tho:

pipe kit (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=72205&item=7965684854&rd=1)

The end pipes on mine come out pretty much where they do on a Hybrid ic - I reckon that kit would work with a bit of jiggery-pokery. Again, I'll get a better pic up asap.

Thanks for all your interest. Surprised nobody's asked about the oil cooler kit yet :-)

[Insomniac]

Ta, not that bothered about the colour, but it would mean I could possibly stick them on straight away. My car needs a respray soon anyway. Thinking of going Bayside blue or red.

[James]

I'll have the bushes off you if the price is right :)
can you remember what you paid for them?

infact, very interested in the oil cooler kit too, just to clarify, it's the cooler, the hoses and the sandwich plate including thermostat? will I need anything else?

[paul180sx]

James yhpm

everybody else - pics of the kouki's will be up this evening. sorry about the delay ..

[pablo]

if you have more pics of the intercooler and bits of pipe fire em over :)

paul.mck -- at -- lineone.net

[Insomniac]

James yhpm

everybody else - pics of the kouki's will be up this evening. sorry about the delay ..
Cool :)

[paul180sx]

Ok. Here are the Koukis. You can see the crack clearly as it's body filler colored :-) My idea was to either tint them - more heavily outside the round bits to cover the repair, or paint the non-round bits black kind of like Skyline lights. I reckon they look better tinted anyway ...

http://www.imagestation.com/picture/sraid163/p1ff55deb913c4a143eddb45af20537af/f48e6a27.jpg

http://www.imagestation.com/picture/sraid163/pbc7643e6a8c71b08387416eeffb289c7/f48e6a2a.jpg

http://www.imagestation.com/picture/sraid163/p77a5a143c4deb14bd5e3ea9eb346f0f7/f48e6a23.jpg

[paul180sx]

and here is the Porsche 944 modified intercooler. You would fit it by attaching the two holes in the ends to brackets attached to the uprights at the front of the car. The middle upright would need to be cut down and attached to the big lug in the middle of the cooler. It does fit really well, honest :-) See the pic further up. Pipework I never fully worked out, but I have the stuff in the pic that I was going to bodge it together with.
I honestly don't know how much I want for this. I may just stick it on ebay, I'm sure it would fit another car. Not a 944 any more tho :-)

http://www.imagestation.com/picture/sraid163/p70559f5e1df0780fe9e90c20e654daa9/f48e6a2c.jpg

http://www.imagestation.com/picture/sraid163/pa446944466933d4bf7b4b937430e4d8f/f48e6a26.jpg

[paul180sx]

and here is the turbo elbow. Somebody asked if it would fit a standard S13 downpipe / T28 setup. I think it will with one of the holes slotted out. Anybody know for sure?

http://www.imagestation.com/picture/sraid163/p42cb8eed7cbc5678d13a1894acf54647/f48e6a24.jpg

http://www.imagestation.com/picture/sraid163/p88fe56c37f2c7b3cd7f98894021a3149/f48e6a20.jpg

[paul180sx]

Going out now, so I will respond to any replies or q's when I get to work tomorrow. Have a good 'un y'all ...

[danch]

Paul,
if someone can confirm that it would fit, I will take it off you.

Where was it sourced from?

Cheers

Daniel

[paul180sx]

yeah, I guess that would help :-) SS Autochrome in the States - er ... well known on here, not popular with some it appears. - it came with one of their very cheap T25/T28 turbo + downpipe deals. Sold the turbo ages ago but for some reason I still had this in the garage. Somebody must be able to answer this one ...

Cheers

Paul C

Really am going out now :-) bye ..


Paul,
if someone can confirm that it would fit, I will take it off you.

Where was it sourced from?

Cheers

Daniel

[danch]

Quick Q Paul,
What downpipe are you using with it atm? 3" or has it never been fitted?

Cheers

Daniel

[madcowman]

4. S13 front TC Arms c/w poly bushes. Replace the big fluid-filled jobs. £50?

I'll take em :)

[paul180sx]

It's never been fitted m8



Quick Q Paul,
What downpipe are you using with it atm? 3" or has it never been fitted?

Cheers

Daniel

[paul180sx]

Cool. Sold to Mr Dick :thumbs: YHPM


I'll take em :)

[NICK SOUTH LOND]

Will Have kouki rear light if not sold pm me so we can sort asap

Many Thanks

[paul180sx]

OK the Koukis, the oil cooler, the suspension bushes and the TC arms are now sold. Still lots left tho ...

[paul180sx]

bump. remaining stuff going on ebay later and everything open to offers ..

[paul180sx]

This is what I've got left, everything open to offers:

GReddy 52mm electric temperature gauge - oil or water. Brand new, boxed. Black face £70? Listed on ebay

GReddy 52mm electric oil pressure gauge. Brand new, boxed. Black face £70? Listed on ebay

GReddy alloy turbo exit pipe. Goes between the turbo and the intercooler. This is an absolutely perfect fit for an S13 with a T28 fitted as it's actually designed for the SR20 180SX. Brand new, boxed. £50?

GReddy Turbo timer - old style - matches Profec B, black. bit tatty but works fine. Offers?

S13/ CA18DET Borg + Beck/ Exedy Clutch + new Nissan release bearing. Bought it off someone on here - who was that? can't remember :-) Used to belong to Jez (Horsham) apparently. I've never used it - done about 60,000 miles. I paid £60 delivered - similar offer? Do a search, you'll probably be able to trace its history ...

Genuine HKS Super Drager 5" / 130mm tailpipe. This is a Skyline tailpipe that has been cut off. Can definitely be made to fit an S13 - see pic further up Offers?

Porsche 944 turbo FMIC modified to fit a S13 - see pics further up. It fits perfectly between the uprights at the front of a pre facelift S13 and right in the hole in the bumper. It cost me about £150 all-in. Tested ok at 30psi. Offers over £50? Needs to be collected, it's pretty heavy ..

Standard S13 alloys + crap but legal tyres. Could be useful for drifting ? NOW FREE to whoever wants to come and get 'em. Need the space ..

S13 space saver spare wheel - v rare item apparently? Offers? Needs to be collected ..

set of standard size wheel studs - offer

Set of standard size locking nuts - offer

[Girlracer]

yhpm :)

[tony2sx]

any idea what power the clutch will take

[Lee@]

yhpm

[pablo]

still got the cooler mate? If so Ill take it and any pieces of pipe/hoses you have :)

[paul180sx]

Guys - I've put the Porsche FMIC on ebay because 4 of you have said you want it but nobody has made me a firm offer :) £50 start. Go on, have it - it's unique :thumbs:

[pablo]

didnt hear from you so I bought one off ebay.

[pablo]

REALLY wanted it too :(