S14/14a Parts For Sale

[Wookie]

1 x 7.5x16” Mitsibushi FTO 5 Spoke Alloy wheel (5x114.3, ET 42) -£20
4 x S14a Standard Springs - £20
1 x S14a Standard Front Anti-roll bar - £10
1 x S14a Standard Rear Anti-roll bar - £10
1 x S14/14a Standard Exhaust manifold (no cracks) - £35
2 x S14 Heads (bear apart from valves, probably need skimming) - £35 each
2 x 225x40x18 Michelen Pilot Sport (track tyres just below legal limit) - £10 each

All prices are plus Postage and packaging. Collection is welcome where appropriate.

PM me if interested in any of the parts. But please be patient as I only have access to the net in work. All pm's will be answered.

Thanks for looking :thumbs:

[purplepower]

first dibs on the discs please :thumbs:

[B19-TRB]

Where Abouts In South Wales R Ya!?

[Wookie]

I live in the sunny Rhondda Valley :no: :no: mate but work in Swansea. If you are comming to the next Welsh meet at the end of the month I can bring anything you want along then. :thumbs:

[DanS14]

Hiya, interested in the spare head. Not quite sure what you mean by bare though. Do you know what else would be required to make the head complete and ready to fit?

Cheers

[Wookie]

By bare I mean all that's in the heads are the valves and valve springs. NO cams, retainers, pulley wheels , timing chains etc, Nowt :D . Ideal if your building a head from scratch, but I would recommend that you get it skimmed though as I don't know what was wrong with the engines they came off.

[B19-TRB]

where is the welsh meet!?

is that the 1 @ the service station!?

[Wookie]

That's the one at the Cardiff Gate Services see the following thread:
http://www.sxoc.com/vbb/showthread.php?t=81854

[DanS14]

If I had any idea how much that little lot would cost, I'd probably take one of the heads off your hands (hmm that sounds odd!).
I was thinking of fitting poncams and RAS at a (much) later date, and it may be a good base to work from. Will have to check some costs etc

Thanks:D

[Wookie]

If I had any idea how much that little lot would cost, I'd probably take one of the heads off your hands (hmm that sounds odd!).
I was thinking of fitting poncams and RAS at a (much) later date, and it may be a good base to work from. Will have to check some costs etc

Thanks :D That's why I bought them with the plan of buliding a complete big BHP engine from scratch, but Im never going to get the time to do it :mad: so may as well sell them and let someone else have a go :nod:

[B19-TRB]

Ok m8!

Can u keep the inlet manifodl & ancillaries back for me pls!

[Wookie]

No probs mate. What exactly do you want though. The Plenum and ancillaries or the manifold which attatches the Plenum to the head :confused: Saying that you can have the fcuking lot :D :D need to make room.

So you want me to bring them to the meet on the 27th :thumbs:

[B19-TRB]

Yea bring it all with ya m8 pls!

Basically I wanna have it all powder coated so i can just swap it over on2 mine without takin the car off the rd!

[Actual_Ben_Taylor]

Yea bring it all with ya m8 pls!

Basically I wanna have it all powder coated so i can just swap it over on2 mine without takin the car off the rd!

What is it with Fordies and this obsession with powder coating??? ;) :p

[B19-TRB]

Dunno! for some reason I want everythin under the bonnet black! already done the breather & gunna do the strut brace when that turns up! lol

But I aint done powder coating before! the escort had more bling than Mr T! lol

http://www.sidtech.co.uk/iu/B19TRB629322083034.jpg
http://www.sidtech.co.uk/iu/B19TRB004188796154.jpg

[Wookie]

bump :D

[Butuz]

Wookie im interested in a head to build up to go on mine. Can you bring them with you sunday for me to have a look at?

Cheers

Butuz

[Wookie]

PM sent :thumbs:

[ade76]

bollox i'd would have had the brakes off you :nod:

[Wookie]

Still got them Ade if you want them :nod: :thumbs:

[Paulie]

Hi Mate, have you still got the fuel pump? I think mines just packed up, bastid :mad: Are they the same for a 14? Where the hell is it anyway. Just found a thread about changing the pump, but still need a good'un to stick in.

[Wookie]

Yep still got it here mate. Shouldn't see why it won't fit an s14, don't know if someone can confirm this. Im sure it's under a plastic bolt down falp thingy in the floor in the boot which goes into the petrol tank, I didn't take it off my car someone else did so I can't be very specific :D . All I know is that I was very nervous when chris was sitting there with one hand in my petrol tank, smoking a fag :eek: :eek:

If you deffinately want it i'll put it up as sold. PM me your address etc and I'll give you the payment details. :thumbs:

[Chris]

Yep still got it here mate. Shouldn't see why it won't fit an s14, don't know if someone can confirm this. Im sure it's under a plastic bolt down falp thingy in the floor in the boot which goes into the petrol tank, I didn't take it off my car someone else did so I can't be very specific :D . All I know is that I was very nervous when chris was sitting there with one hand in my petrol tank, smoking a fag :eek: :eek:

If you deffinately want it i'll put it up as sold. PM me your address etc and I'll give you the payment details. :thumbs:yeah the pump will fit perfectly :nod:

[Wookie]

bump :thumbs:

[cranky]

first dibs on the S14a WMIC and Pipe work please mr, how much inc p&p?

[Wookie]

Cranky you have pm :thumbs:

[daniel_johno]

PM sent

[Aitch]

Interested in the shocks - I'm in Congleton Cheshire so PM me a price delivered and I'll let you know :thumbs:

[Wookie]

daniel_johno and Aitch you have pm :thumbs:

[jamiesx]

Hi did the wmic get sold? if not id be interested

[Wookie]

Still got it mate was let down. It's all boxed up and ready to go if you want it :thumbs:

[jamiesx]

Can you let me know how with posting please? and how would you like paying sir?
Paypal, cheque, kindness(only kidding)