Adj FPR

[Dave_S14]

Had one of these fitted for a while now but never really thought about if it was adjusted correctly. Basically, I bought it 2nd hand and the previous owner had adjusted it, I just had it fitted as it was, with no other adjustments made. So I don't know how its set up, if it was on its lowest setting would that be lower or at least the same pressure as the standard one, or higher even, if that makes sense :confused:

Cheers,

Dave.

[ROAD WARRIOR]

Hi mate, i've had one of these for a couple of years. Mine was set up at the garage where i get all my stuff done. Basically, it needs to be set up correctly using a gauge on the line to the injectors, mine is set at just over 4bar. Unless there is a gauge built in to yours there is no way that you'll know what it's up to. It could be set too low which is bad news if ur running higher boost! Take it to someone and get it checked out, they'll set it up around the mods you've done to ur motor. :thumbs:

[JSF]

This should be set to 3BAR atmospheric if you are retaining the stock ECU map.