NSX wheels

[Ad]

I've heard that the pcd is the same as S14a's but what about offsets?

Std NSX offsets are 55mm front 60mm rear

Also would it upset the cars handling to run 17's on the front and 18's on the back? Would above offsets apply to the larger size or have a got this bit arse backwards?

Any thoughts on this?

Ad.

[Papa Lazarou]

NSX wheels are a similar fit to S14's, on paper anyway. I don't think the offset will be that high! They have a 70mm bore compared to Nissans 66mm so you might have issues with centring them correctly (for aftermarket wheels, just get the correct spigot rings).

PCD's and recommended offsets etc are here http://www.takakaira.co.jp/rimsandtyres/rimsandtyresindex.asp

[glens14a]

94>02 NSX type NA2
front 7x16 5x114.3pcd et55 centre bore:70.1 with 215/45x16
rear 8.5x17 5x114.3pcd et55 centre bore:60.1 with 245/40x17

02> NSX COUPE-R
front 8x17 5x114.3pcd et55 centre bore:70.1 with 215/40x17
rear 8.5x17 5x114.3pcd et60 centre bore:60.1 with 255/40x17

The offset is that big and they defo have 2 different centre bore :ghey:

[Ad]

Thanks for the reply's guy's!! Guess that them out of the equation then! :)

Why do they have different centre bore front to back? Sound very odd to me!

Cheers again!

Ad.