daveyboydave
New member
Not a lot to update I'm afraid. I've been at sea / based the other end of the country and only get home a few days a month so progress has very much slowed down. I was hoping to be on track in the summer but that isn't going to happen now.
When I have had time I've concentrated on fixing a few niggles and doing some deep maintenance to ensure reliability. In no particular order:
1. The AC has degassed itself so I took this to be a sign and removed the AC system. I only need to take out the bits behind the dash now, but it's already a decent weight saving for something that isn't necessary on a track slag (and which didn't work anyway).
2. I changed the lambda sensor: this sorted out the lumpy idle and improved the mpg significantly. I also changed the plugs and gapped them to 0.7mm, and cleaned the MAF.
3. I fixed the ABS issue. I traced it to the front left wheel but the sensor checked ok, then I found a continuity break and traced it to a nicked cable (must have been damaged when I was fixing the turbo gasket.
4. I fitted new engine mounts (Hardrace Streets), and procured a Vibratechnics gearbox mount which I haven't fitted yet.
<a href="https://www.flickr.com/photos/73656533@N05/17622003193" title="20150319_145300 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7736/17622003193_5d56f413ac_b.jpg" width="1024" height="576" alt="20150319_145300"></a>
5. While the work-in-way for getting to the mounts was out, I've been touching up the paint in the engine bay wherever it's needed it.
<a href="https://www.flickr.com/photos/73656533@N05/17620001194" title="20150319_143515 by DaveyBoyDave, on Flickr"><img src="https://c1.staticflickr.com/9/8787/17620001194_137a209201_b.jpg" width="576" height="1024" alt="20150319_143515"></a>
6. I took the rocker cover off and cleaned the spray bars. They were a bit gunky but not blocked; they look like new now:
<a href="https://www.flickr.com/photos/73656533@N05/18056417889" title="20150102_215712 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7764/18056417889_3fd0d4dcc7_b.jpg" width="576" height="1024" alt="20150102_215712"></a>
Everything looked ship shape to my untrained eye:
<a href="https://www.flickr.com/photos/73656533@N05/18243920251" title="20141230_215931 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7730/18243920251_3410ac975d_b.jpg" width="576" height="1024" alt="20141230_215931"></a>
<a href="https://www.flickr.com/photos/73656533@N05/18238885992" title="20141230_215939 by DaveyBoyDave, on Flickr"><img src="https://c1.staticflickr.com/9/8830/18238885992_fd8ac5e83b_b.jpg" width="576" height="1024" alt="20141230_215939"></a>
7. I bought a cheapy ally oil catch can off eBay. The quality was, naturally, appalling, and I had to make the fittings airtight and all sorts, but it's good now. I wanted to make some baffles to improve its effectiveness. I noticed a coke can was almost the perfect diameter to fit in the catch can, so I made these with some scissors and a drill:
<a href="https://www.flickr.com/photos/73656533@N05/18054789498" title="20150110_214945 by DaveyBoyDave, on Flickr"><img src="https://c1.staticflickr.com/9/8860/18054789498_4d8e6e9edb_b.jpg" width="576" height="1024" alt="20150110_214945"></a>
Then mounted them like this:
<a href="https://www.flickr.com/photos/73656533@N05/18238883032" title="20150110_215817 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7773/18238883032_66bb8841e1_b.jpg" width="576" height="1024" alt="20150110_215817"></a>
To make this:
<a href="https://www.flickr.com/photos/73656533@N05/17622005953" title="20150110_220033 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7777/17622005953_9b8a83568f_b.jpg" width="576" height="1024" alt="20150110_220033"></a>
Voila:
<a href="https://www.flickr.com/photos/73656533@N05/18238881822" title="20150110_222101 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7769/18238881822_b8c5d00b4e_b.jpg" width="576" height="1024" alt="20150110_222101"></a>
I'm currently in the process of making up a bracket and mounting it in the engine bay:
<a href="https://www.flickr.com/photos/73656533@N05/18216157466" title="20150318_122653 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7775/18216157466_c42aa089a0_b.jpg" width="1024" height="576" alt="20150318_122653"></a>
I'm thinking about mounting it where the stock ignition amp goes. I know it's near the exhaust manifold, but the hoses will be in thermal sleaves and the catch can itself should be fine - what do you reckon?
8. While I've been away from the car I've been modding a second hand grill to remove the central piece. This is hardly priority work, but it's something I can do with a handfull of tools while away from the car, and I'm using it as a learning tool as I've never modded bodywork before. I'm just copying Blaktooth here, because it looks cool!
<a href="https://www.flickr.com/photos/73656533@N05/18054887040" title="20150110_160211 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7760/18054887040_e80e8211b4_b.jpg" width="1024" height="576" alt="20150110_160211"></a>
<a href="https://www.flickr.com/photos/73656533@N05/18238884462" title="20150110_160318 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7760/18238884462_2cffe60aa8_b.jpg" width="1024" height="576" alt="20150110_160318"></a>
<a href="https://www.flickr.com/photos/73656533@N05/18242629335" title="20150503_153003 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7795/18242629335_958a1751ac_b.jpg" width="1024" height="576" alt="20150503_153003"></a>
I'm still working on smoothing and leveling the filler. Once I'm happy I'll spray the whole thing matt black.
9. I also bought a 3.9 auto diff which I'm in the process of cleaning up for painting and fitting.
<a href="https://www.flickr.com/photos/73656533@N05/18216163566" title="20140928_155151 by DaveyBoyDave, on Flickr"><img src="https://c1.staticflickr.com/9/8789/18216163566_52ee62157c_b.jpg" width="1024" height="576" alt="20140928_155151"></a>
I guess that all looks like a decent amount of progress, but that's over 6 months! Shamefully slow progress compared to some projects on here.
When I have had time I've concentrated on fixing a few niggles and doing some deep maintenance to ensure reliability. In no particular order:
1. The AC has degassed itself so I took this to be a sign and removed the AC system. I only need to take out the bits behind the dash now, but it's already a decent weight saving for something that isn't necessary on a track slag (and which didn't work anyway).
2. I changed the lambda sensor: this sorted out the lumpy idle and improved the mpg significantly. I also changed the plugs and gapped them to 0.7mm, and cleaned the MAF.
3. I fixed the ABS issue. I traced it to the front left wheel but the sensor checked ok, then I found a continuity break and traced it to a nicked cable (must have been damaged when I was fixing the turbo gasket.
4. I fitted new engine mounts (Hardrace Streets), and procured a Vibratechnics gearbox mount which I haven't fitted yet.
<a href="https://www.flickr.com/photos/73656533@N05/17622003193" title="20150319_145300 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7736/17622003193_5d56f413ac_b.jpg" width="1024" height="576" alt="20150319_145300"></a>
5. While the work-in-way for getting to the mounts was out, I've been touching up the paint in the engine bay wherever it's needed it.
<a href="https://www.flickr.com/photos/73656533@N05/17620001194" title="20150319_143515 by DaveyBoyDave, on Flickr"><img src="https://c1.staticflickr.com/9/8787/17620001194_137a209201_b.jpg" width="576" height="1024" alt="20150319_143515"></a>
6. I took the rocker cover off and cleaned the spray bars. They were a bit gunky but not blocked; they look like new now:
<a href="https://www.flickr.com/photos/73656533@N05/18056417889" title="20150102_215712 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7764/18056417889_3fd0d4dcc7_b.jpg" width="576" height="1024" alt="20150102_215712"></a>
Everything looked ship shape to my untrained eye:
<a href="https://www.flickr.com/photos/73656533@N05/18243920251" title="20141230_215931 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7730/18243920251_3410ac975d_b.jpg" width="576" height="1024" alt="20141230_215931"></a>
<a href="https://www.flickr.com/photos/73656533@N05/18238885992" title="20141230_215939 by DaveyBoyDave, on Flickr"><img src="https://c1.staticflickr.com/9/8830/18238885992_fd8ac5e83b_b.jpg" width="576" height="1024" alt="20141230_215939"></a>
7. I bought a cheapy ally oil catch can off eBay. The quality was, naturally, appalling, and I had to make the fittings airtight and all sorts, but it's good now. I wanted to make some baffles to improve its effectiveness. I noticed a coke can was almost the perfect diameter to fit in the catch can, so I made these with some scissors and a drill:
<a href="https://www.flickr.com/photos/73656533@N05/18054789498" title="20150110_214945 by DaveyBoyDave, on Flickr"><img src="https://c1.staticflickr.com/9/8860/18054789498_4d8e6e9edb_b.jpg" width="576" height="1024" alt="20150110_214945"></a>
Then mounted them like this:
<a href="https://www.flickr.com/photos/73656533@N05/18238883032" title="20150110_215817 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7773/18238883032_66bb8841e1_b.jpg" width="576" height="1024" alt="20150110_215817"></a>
To make this:
<a href="https://www.flickr.com/photos/73656533@N05/17622005953" title="20150110_220033 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7777/17622005953_9b8a83568f_b.jpg" width="576" height="1024" alt="20150110_220033"></a>
Voila:
<a href="https://www.flickr.com/photos/73656533@N05/18238881822" title="20150110_222101 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7769/18238881822_b8c5d00b4e_b.jpg" width="576" height="1024" alt="20150110_222101"></a>
I'm currently in the process of making up a bracket and mounting it in the engine bay:
<a href="https://www.flickr.com/photos/73656533@N05/18216157466" title="20150318_122653 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7775/18216157466_c42aa089a0_b.jpg" width="1024" height="576" alt="20150318_122653"></a>
I'm thinking about mounting it where the stock ignition amp goes. I know it's near the exhaust manifold, but the hoses will be in thermal sleaves and the catch can itself should be fine - what do you reckon?
8. While I've been away from the car I've been modding a second hand grill to remove the central piece. This is hardly priority work, but it's something I can do with a handfull of tools while away from the car, and I'm using it as a learning tool as I've never modded bodywork before. I'm just copying Blaktooth here, because it looks cool!
<a href="https://www.flickr.com/photos/73656533@N05/18054887040" title="20150110_160211 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7760/18054887040_e80e8211b4_b.jpg" width="1024" height="576" alt="20150110_160211"></a>
<a href="https://www.flickr.com/photos/73656533@N05/18238884462" title="20150110_160318 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7760/18238884462_2cffe60aa8_b.jpg" width="1024" height="576" alt="20150110_160318"></a>
<a href="https://www.flickr.com/photos/73656533@N05/18242629335" title="20150503_153003 by DaveyBoyDave, on Flickr"><img src="https://c4.staticflickr.com/8/7795/18242629335_958a1751ac_b.jpg" width="1024" height="576" alt="20150503_153003"></a>
I'm still working on smoothing and leveling the filler. Once I'm happy I'll spray the whole thing matt black.
9. I also bought a 3.9 auto diff which I'm in the process of cleaning up for painting and fitting.
<a href="https://www.flickr.com/photos/73656533@N05/18216163566" title="20140928_155151 by DaveyBoyDave, on Flickr"><img src="https://c1.staticflickr.com/9/8789/18216163566_52ee62157c_b.jpg" width="1024" height="576" alt="20140928_155151"></a>
I guess that all looks like a decent amount of progress, but that's over 6 months! Shamefully slow progress compared to some projects on here.


