Hi Guys
Time for another one if there's interest
For this GB to go ahead we need at least 20 peeps to join, any less and it's not really a large enough order to warrant the shipping fees
Prices are as follows:-
Godspeed front and rear ARB's with thermoplastic droplinks
Godspeed ARB's are made from 30mm (front) and 28mm (rear) chromoly tubing, chromoly steel is stronger, lighter and more tough than ordinally steel, as such these ARB's are not only rust resistant unlike other roll bars on the market, they reduce body roll significally. They are a must have for track and drift enthusiasts aswell as fast road users.
There are a large amount of peeps on here with Godspeed ARB's and the response to their performance is substantial. There is also a drifter on here who removed his Whiteline ARB's, and fitted the Godspeed ones and he has noticed a much more balanced car whilst drifting and much less body roll.
The Godspeed ARB's are £190 a pair (front & back) inc thermoplastic droplinks. Godspeed ARB's are probably the most effective way of sorting out your cars handling, a well worthy investment
Other items up for grabs:-
Godspeed rear cross bars (S13's)
Godspeed cross bar is born for one function only by connecting the c-pillar and rear upper strut making the rear section of the car act as one thus reducing the flex to zero. It utilizes the C-pillar and strut points to decrease / eliminate body flex during hard cornering. Maximizing 4 critical points of the chassis to 1 stress point. the improvement is undeniable The Godspeed cross bar is the standard of pillar bar & strut bar combined. you will feel the difference instantly after installation, as this is probably the weakest part of the S13 due to the hatchback design.
These are coming it at £170
Godspeed Type RS coilovers:-
GODSPEED TYPE-RS Coil-Over Dampers is the perfect enhancement to your track or street car. Featuring 16 Levels of damper force adjustment, full-height adjustment.
The damper can easily adjusted by turning the knob at the top of the damper. Turning the knob can simply change your daily driving or track day needs. The height adjustment is made easy with CNC-Machined locking perches for accuracy and smooth adjustment. You can easily raise your car to oem height or lower your car for track performance.
The quality and durability of the GODSPEED Racing Damper kits are made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. we stand by our product with 1 YEAR warranty. (from date purchase. Must be installed by professional tuning shop)
Features:
- Spring Rates: 8kg Front and 6kg Rear
- 16 Levels of Adjustable Damper
- Pillow Ball Upper Mounts.
- Rubber Dust Covers.
- Adjustable Ride Height
- Aggressive Spring Rates
- Single-Cylinder Design
- Aluminum Brackets
16 Levels of Adjustment:
1-5: Suggested for track use.
6-11: Suggested for mountain/aggressive use.
12-16: Suggested for common street use.
These coilovers will be available for £450 in the GB
If thats not enough check out these other extras:-
Front Tension Rods
The adjustable front tension rods are built using pillow ball joints, and have protective boots for longevity. These are ideal for track users who need more custom suspension settings. They are made from high quality steel and super quality welds.
Add the front tension rods for only £65 a pair.
Rear Traction Rods
The adjustable rear traction rods are built using pillow ball joints. These are ideal for track users who need more custom suspension settings. They are made from high quality steel and super quality welds.
Add the rear traction rods for only £65 a pair.
Rear Toe Arms
Godspeed have just released the perfect rear toe arm, solutions for all drifter!! perfect for street/ even better for track days! Their toe arms been track tested, and show a major improvement for launching and drifting , fully adjustable to your needs. ( up to 3 degrees) reduce rear squat on inner edge tire wear, also improves rear traction.
Add the rear toe arms for only £65 a pair.
Rear Camber Arms
Godspeed have just released the perfect rear camber solution for lowered s13 or S14/S14a! If you have lowered your car, your rear camber is off and the best solution for the correct suspension setup is Godspeeds new Rear Camber Adjusters complete with Rod-Ends. Designed for race-precision adjustments and long service life, these rear camber adjusters are equipped with hemispherical rod-ends that allow incredibly controlled rear suspension travel & predictable response. They also improve handling and allow for even tyre wear!
Add the rear camber arms for only £65 a pair.
For the serious enthusiasts Godspeed now have a couple of extra special arms
Gen II Toe Arms £95
GODSPEED have just released the GEN2 adjustable toe arm, this toe arm is a lot more beefier then our first generation arms, this will provide more stiffer / better handling then any arms our there. This toe arm is also angled which will allow customer to lower the ride to its maximum lowering point.
Gen II Traction Arms £95
GODSPEED have just released the GEN2 adjustable traction arm, this traction arm is a lot more beefier then our first generation arms, this will provide more stiffer / better handling then any arms our there. Using this traction arm will also correct uneven tire wear , improve traction.
All the rear arms come with a 2 year warranty and come with rubber boots and a pack of grease to aid fitting and to ensure longevity.
S14 Intercooler kits
95-98 200SX s14 (sr20det motor ) GODSPEED FMIC INTERCOOLER KIT
4X pieces of polish aluminum pipe set up
5x polyester reinforced High temperature silicone hose
10x T-Bolt Clamp
1x GODSPEED SPEC V intercooler ( bracket included)
INTERCOOLER SPEC:
max horsepower capacity: 650-700hp
core length: 24"
core height: 12"
core thickness: 3"
inlet / outlet size: 3"
end to end length: 30 1/2"
Add an S14 intercooler kit for £190
S13 & S14 Cat Back Exhaust
100% SUS-304 Stainless Steel with computerized mandrel-bent
- Tip size is 4.5", 3" piping. Come with and silencer
- CNC machine flanges for strong solid support
- TIG weld for strength and durability
- 3 stage polish shine like a mirror
- Increase 20-25 horse power and torque (dyno proven)
- Straight thru design and bolt-on installation
Add a cat back exhaust for £140
If you have any questions please don't hesitate to ask
Dan