going to reduce my 80% built forged engine to parts again and fit a stroker crank and 90mm pistons giving just under 2.4L there's going to be loads of pics and information on what i do and what parts i use and over the next week i will start, even looking at dry sumpso be prepared for regular updates as the chassis is taking a back seat until the warmer weather comes, i hate the cold
Sounds like an interesting project mate
Where abouts in cov are you? I've only seen one other S body round the area lately
allesley park, the cars been off the road for a couple of years being restored and altered, thats in another threadOriginally Posted by Lex Shanks
Sounds like an interesting project mate
Where abouts in cov are you? I've only seen one other S body round the area lately
this is how it stands at the moment befor i start striping it down
[IMG][/IMG]
[IMG][/IMG]
left my camera at work so i cannot post up pics off all my new parts
looks like alot of works been put into it already, looking forward to some pics of the progress
its already got liners fitted, darton an a bore of 87mm with cp pistons and a knife edged crank, pauter X-beam rods, i now have a Mazworx torque plate which when fitted will seal all the water ways making it easy to pressure test the block to se if the liners leak [they where cryo fitted] so should not but if they do Chesman engineering do a ceramic sealing process that will deal with that problem, there web site is crap as it does not list a fraction of what they dolooks like alot of works been put into it already, looking forward to some pics of the progress
im not selling the engine or any of the parts as there going into a spare back up engine
Lol, sorry...you never know untill you ask!!im not selling the engine or any of the parts as there going into a spare back up engine
Will be following this with great interest!
Sounds great! What level of power you going for?
Subscribed
This looks like it will be just as interesting as the car build
3rd Overall 2016 JDS Street Class Santa Pod
7th Overall 2013 JDS Street Class Santa Pod
8th Overall 2012 JDS Street Class Santa Pod
9th Overall 2011 JDS Street Class Santa Pod
2nd Overall 2010 Prostreet drag series Shakespear County Raceway
4th Overall in street class 2010 HKS drag series Santa Pod
2nd Place TOTB IX RWD Drag Shoutout
Best 1/4 Mile ... 10.96 @ 132mph Santa Pod October 2nd 2010
really looking foward to this after reading your other build mate.
Looking forward to seeing the results mate
ha ha i asked too guess your my arch enemy when it comes to snapping up engine goodies :P
wow im impressed your not selling anything to fund the new build
anyways ill be watching this with alot of interest
Sounds like a serious build
You should get a 240sx badge when your finished.
Sounds like its going to be a monster. What turbo are you going to run on the new spec?
im going to run it in on a holset hx35 then go to an hx40/35 hybrid
Do you have a target output when all done?
You GIT!!! lol
You have have to up the game just when i was getting most of parts together! Now im going to have to up mine! Will be following this with great interest mate.
Cheers Aj
LOL you two are going to spend so long outdoing each other that you will forever be upgrading without building anything lol.
I have made that mistake several times already. Looking at both yours and ex-ctr's projects have made me buy something, then sell it and buy the next thing up. Now im thinking of selling my 2.2 and going to 2.4 aswell.
You better hope my other half doesnt ever meet either one of you! lol
Cheers Aj
Posting Permissions
Reply With Quote
