Results 1 to 10 of 10

Thread: How to fit S14 leather seats into an S13

  1. #1
    Guest Cheekee's Avatar
    Join Date
    Dec 2001
    Location
    Bristol, UK
    Posts
    1,052
    Rides
    0

    How to fit S14 leather seats into an S13

    Due to popular Demand


    Leather Seats in
    Leather seats are in fronts (as expected) bolt in no fuss.

    Rears are also in (little modifying needed) the two lugs that the back clip into are further apart on the S13 than on the S14.

    1. undo lugs and wedge a 1/2inch nut behind the bracket on the outer edge. Presto lugs are now angled in enough to fit into the S14 Back.

    2. at the bottom of the back are two bolt on pivot plates that the back hinges on S14 bottom of back seat is quite a bit narrower than S13 so at the moment this can not be bolted back (an extended plate should sort that out). I will then be getting some foam pads leathered up and inserted into the gap you should not even notice they're there.

    3. bottom seat is a better fit S14 has lugs with screws holding it to the frame. (out with the drill and self tappers) job done.

    Cracking job about 3 hrs tw@ting about .


    I love leather

  2. #2
    Guest Geeza's Avatar
    Join Date
    Sep 2001
    Location
    Over here...I think?
    Posts
    2,755
    Rides
    0
    Sounds well nice mate...

    Got any piccies?

    How much should you expect to pay for a S14 interior in good nick?

    What about the door inserts?

  3. #3
    Guest Vividance's Avatar
    Join Date
    Sep 2002
    Location
    Singapore
    Posts
    281
    Rides
    0
    any body have any ideas whether , the S15 front seats will bolts on to S13 like the S14's??

  4. #4
    Guest
    Join Date
    Mar 2002
    Location
    Aylesbury
    Posts
    5,375
    Rides
    0
    Originally posted by Vividance
    any body have any ideas whether , the S15 front seats will bolts on to S13 like the S14's??
    I dont think anyone on this board has been able to get hold of any to try it

  5. #5
    Guest Cheekee's Avatar
    Join Date
    Dec 2001
    Location
    Bristol, UK
    Posts
    1,052
    Rides
    0
    When I get my 200 back I'll take some photos of the leathers and other bits that I've been meaning to do

  6. #6
    Guest Vividance's Avatar
    Join Date
    Sep 2002
    Location
    Singapore
    Posts
    281
    Rides
    0
    oh okie ...

  7. #7
    Guest
    Join Date
    Jan 2002
    Location
    Bristol
    Posts
    1,178
    Rides
    0
    Thanks Cheekee!!!!

    I should be putting this into action over the weekend..
    What do you do with the doors?? Do you leave them??
    Last edited by marty; 11-11-2002 at 00:50.

  8. #8
    Guest Cheekee's Avatar
    Join Date
    Dec 2001
    Location
    Bristol, UK
    Posts
    1,052
    Rides
    0
    Originally posted by marty
    Thanks Cheekee!!!!

    I should be putting this into action over the weekend..
    What do you do with the doors?? Do you leave them??
    oh yes good for keeping the wind out at high speeds

    Left the door inserts as the 14s don't fit

  9. #9
    Guest Chimp's Avatar
    Join Date
    May 2001
    Location
    Cheshire
    Posts
    2,120
    Rides
    0
    Originally posted by Cheekee


    oh yes good for keeping the wind out at high speeds


    hehehe

  10. #10
    Guest
    Join Date
    Jun 2002
    Location
    Newbury
    Posts
    1,189
    Rides
    0
    When I get my 200 back
    What you havin done to it mate?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •