North West Tools Repository
Just a quick idea, dont know if this will work but I have just aquired a Rear Caliper winder, bloody great tool and made rear brake pad change a doddle. I have a number of bits that could be used by others (as long as returned in there original condition promptly):
Rear Brake Caliper winder
100mm Hole Saw
ANyone else got anything they want to add which may be handy and slightly unusual
consult.
dremmel with loads of attachments
boost test kit
suspension spring compressors
timing light
cylinder compression tester
ramps...... now only one as one got crushed
boroscope (fixed shaft)
tap and die set
stud extraction kit
caliper rewind tool
spark plug thread chaser.
axle stands
Last edited by Ivor; 27-04-2008 at 11:13. Reason: updated
Compressor,
4 angle grinders
bolt crops
and soon to have full snap on tool kit too
Cat
86mm hole cutter
Spring compressors
torque wrench
Last edited by SteA; 17-05-2006 at 20:52.
engine crane
spring compressors
air compressor
impact wrench/ratchet
bodged together leakdown tester.
timing light.
6x () trolley jacks/2x massive axle stands/2x normal sized axle stands.
2x torque wrenches
MIG welder with stainless/alu/mild welding wire.
Last edited by alanjuggler; 28-06-2008 at 10:13.
white '94 s13 200sx scrapped - mapped to 1.45bar. OS giken box, garrett GT2876R, 950cc injectors, ORC twin plate, nistune. 349bhp/325lbft @ 1.3bar CA18DET
white '96 s13 180sx - type g with more kouki bits
current status: 180 a bit broken but to be repaired.
Spring compressors
Rear caliper piston winder
Front caliper piston spreader
Power Brake Bleeder
Decent 90mm Hole Saw
i've got a set of handy-dandy hinged ratchet spanners. very useful for getting to those hard-to-reach places
power-crazed Head-Mod
.
Last edited by Ivor; 08-05-2007 at 21:20.
4 post ramps
Noise level tester
Rear calliper winder
Det earphones
Boost leak tester
Battery Zip Gun
Axle stands/trolley jack etc
Torque wrench
Engine compression tester
Dremel and lots of attachments
+ Normal selection of tools
Last edited by SteA; 09-03-2008 at 10:30.
Currently scrabble powered - Leon Cupra 280
Various tools for body repair, paint scheme and a few sprayguns.
Last edited by Smart-Tech; 18-02-2007 at 15:53.
Erm...
Engine crane
Compressor
Air chisel, saw, blah blah
Mig welder
Low trolley jack
Pillar drill
More of the usual grindy bangy cutty wrenchy stuff
Also...
Brake pipe flaring kit
Piston ring compressor
Piston ring pliers (somewhere!)
LM-1 wideband lambda
Timing light
Comp tester, leakdown tester, vacuum gauge
...and a load of other stuff that I can't remember at the mo'!
Trolley Jack
Axle Stands
Piston ring compressor
Piston ring pliers
Compression tester
Brake Caliper winder (for rear)
Spring Compressors
Torque Wrench
Multimeter
Power Brake Bleeding Kit
Full set of ratchet Spanners
HUGE toolchest full of quality tools
36ft long Garage
Engine crane
Trolley jack
Axle stands
Ramps
Various Tools {spanners, sockets etc}
Multimeter
Nuts bolts pipes
Various S14 bits {emergency Loan}
Garage and double drive
Oh yeah A BIG HAMMER
Trained Silverback gorilla, excellent manual labourer, located around the Lytham / St. Annes area.
im north east, but norths north
brake pipe flaring tool
brake pipe bender
piston ring compressor
torque wrench
engine crane
timing gun
huge trolley jack(1m high iirc)
axle stands
impact driver
mig welder
angle grinders and various power sanders
usual tools(screwdrivers, sockets, drills etc)
pillar drill
39" long stillsons(perfect for siezed studs)
oh and a workshop
there will be loads ive missed so if you need owt just ask, i pretty much have everything to do anything to a car
Originally Posted by S14 Stu
I'm not a big ford fan but the RS500 is a legend, you cannot take away from it its Icon status and to suggest that its a chavvy car is like saying Kirsten Scott Thomas is a council estate slapper
Tool for holding rear diff propshaft flange so you can easily tighten / loosen centre nut.
Diff output shaft oil seal drift.
Posting Permissions
Reply With Quote
