I ve done a search and found nothing to help me with my particular problem.
All three fobs work, led's light up ect.but the car still does nt respond to any, not even the master.
Yesterday it was working as normal even though it has done the above a few times before it wont work at all now.
Last edited by leonatlarge; 11-02-2007 at 11:26.
...try pressing lock 8 times in 10 seconds to reset the rolling code.
Worked for me before on NATS 1. what year is yours?
Sounds like a s14a to me as AFAIK S14's don't have master keys and the nats box is the important bit. IIRC the S14 one is as you say tho, its in the NATS book you get with the car
According to the NATS II book, to resync the fob for the s14a
you need to:
1) Press the red and blue button of the keyfob together until the keyfob LED stops flashing.
2) Release the buttons.
3) The keyfob LED should stay ON.
4) Press the red button for 1 second.
The fob should work again
Thanks for your help the lights react like you say but it still not responding.Originally Posted by Alany
Probobly needs an expensive trip to nissan.
Last edited by leonatlarge; 11-02-2007 at 11:28.
new battery
I thought because leds are flashing batteries should be allright i will get some more any way
I think if the batteries are okay and the re-sync of the keyfobs doesn't solve the problem then it is likely you have a fault with your NATS control unit. It sounds as though it's not picking up the signal from the fobs.
Last edited by Dr Bob; 02-12-2007 at 17:21.
Make sure the vehicle battery voltage is OK. Try connecting a battery charger to it, and then trying.
Best of luck. Ian.
That's spot on!
Local Nissan jokers wanted to charge me £35 to do that!
Cheers dude
I've done all of the above, and I've got one of the keyfobs to work. But the Master and the other one still don't work.
Any ideas?
I used to have onethat needed resetting regularly, now two of them do. I think thye probabably need new batteries
You do realise that the master unit will only disarm the alarm or allow you to add another fob to the system? I.E. you should be able to unlock the car with the master fob, but not lock it again.
- James
this post should also help a lot of people who have purchased another new/used control box and need to know what to do for the initial setup
http://www.sxoc.com/vbb/showthread.php?t=228832
sounds like what mines doing at the moment, funny though that mine only does this from mon to sat
http://sxoc.co.uk/vbb/showthread.php?t=189885
I had to do this yesterday as my fobs stopped working. Worked a treat !!
Thanks
Could we edit post number 8 to remove the location of alarm control units please..
I know this might seem comon sense but i kept tryin to do this in the house, reprogrammin the fob with the master but it would never work when i went to the car so last night i tried resetting the fob while in the car and it worked first time. do you actually have to be at the car to do this??? so in essence the fob is resettin the control unit in the car??
just bought a 200 but it cane without any fobs can i buy one of ebay and follow the above steps to program it to my car
Pete, you actually train the car to recognised the new fob. The master lets you put the car into the correct mode for this to happen (so in other words you need to be in range for it to work).
Dazdavies, is your car a S14a or S14 (there are two types of alarm system, NATS I & II). I only know about the NATSII. If you don't have a master then you will need to get a new NATS control box and fobs.
Reply With Quote
