Page 1 of 3 123 LastLast
Results 1 to 20 of 42

Thread: MOT letter for s13 exhaust emissions

  1. #1
    Guest
    Join Date
    Jun 2001
    Location
    Fife, Scotland
    Posts
    21,781
    Rides
    0

    MOT letter for s13 exhaust emissions

    IIRC someone up here has this from the DVLA or something, was it Mike?

    Will probs need it for pending MOT, first time I've MOT'd my L reg one.

    Dunc.

  2. #2
    Guest mr-mac's Avatar
    Join Date
    Aug 2003
    Location
    Dunfermline, Scotland
    Posts
    2,302
    Rides
    0
    I have one from VSA Didn't need it for my recent mot they did the correct test without me mentioning it.

    My scanner isn't working at the moment though.

  3. #3
    Guest
    Join Date
    Jun 2001
    Location
    Fife, Scotland
    Posts
    21,781
    Rides
    0
    Ah, that'd be handy if I could get that - any chance of photocopying it and bringing it to meet or posting? The newer the s13 the harder to explain and get the right test it is. Many places go by after '92 and it needs a CAT rule. Mines a '94.

    Dunc.

  4. #4
    Guest Mike's Avatar
    Join Date
    Sep 2001
    Location
    Aberdeen
    Posts
    3,961
    Rides
    0
    ************************************************** ********************
    This email and any files transmitted with it are confidential and
    intended solely for the use of the individual or entity to whom they
    are addressed. If you have received this email in error please notify
    postmaster@via.gov.uk, or phone 0117 954 3329.

    This footnote also confirms that this email message has been swept by
    MIMEsweeper for the presence of computer viruses - see
    www.mimesweeper.com for more details.

    Visit www.via.gov.uk for details of the Vehicle Inspectorate's
    activities.
    ************************************************** ********************



    Your information is correct, although the vehicle was fitted with a CAT it does
    not need to be fitted with one for MOT. However it still needs to meet the
    emissions limits. As there is no exact match for this make and model of vehicle
    it will have a non-CAT test (2) applying limits: CO<=(3) 3.5%
    HC<=1200ppm(4).

    Regards

    A K Thomas




    "Mike Rowley" on 02/12/2001 21:00:23

    To: Enquiries@VIA
    cc:
    Subject: MOT emissions/cat



    Hi,
    Can you help? I have a Nissan 200sx Coupe 1.8 Turbo (S13) registered 1st
    August 1993. I understand that although it was sold with a CAT, it does not
    need to have one fitted when it goes for an MOT. Pls confirm this is
    correct. Of course, it must still pass the emissions limits. Pls can you
    confirm what emissions limits it (as a pre '95 but post '92 car) must pass.
    Much appreciated!
    Mike


    __________________________________________________ ___________________
    This email has been scanned for viruses by the MessageLabs SkyScan service.

    For further details, please see
    http://www.gsi.gov.uk/main/gncnotice...tice5_2001.pdf, or contact
    your departmental help desk.

    The Message Labs trial has been extended until further notice.

    In case of problems, please call your organisations IT helpdesk.

  5. #5
    Guest
    Join Date
    Jun 2001
    Location
    Fife, Scotland
    Posts
    21,781
    Rides
    0
    Cheers Mike, any chance of getting that letter sent anyway John so I can take it along? Would be annoying if I had to take for retest for that one thing.

    Also does anyone know if all side lights need to be working (i.e. all 4 of them) as I only have 3 that work but most cars only need 2.

    Cheers,

    Dunc.

  6. #6
    Guest
    Join Date
    Nov 2003
    Location
    sheffield s.yorks
    Posts
    2,648
    Rides
    0

    mot

    as a general rule for the mot if its fitted it must work.thats what i was told by our local mot station
    tony

  7. #7
    Guest mr-mac's Avatar
    Join Date
    Aug 2003
    Location
    Dunfermline, Scotland
    Posts
    2,302
    Rides
    0
    erm 3 sidelights?

    I though we only had 2 (the bumper ones), 2 dip headlights and 2 full beam?

    I will try and remember to bring it into work tomorrow or friday (I am off on holiday for 2 weeks after that so could maybe meet half way over the weekend if I forget it).


  8. #8
    Guest
    Join Date
    Jun 2001
    Location
    Fife, Scotland
    Posts
    21,781
    Rides
    0
    There's sidelights in the main headlights too, you've probably done the headlights down on sidelights mod you doofus

    Dunc.

  9. #9
    Guest mr-mac's Avatar
    Join Date
    Aug 2003
    Location
    Dunfermline, Scotland
    Posts
    2,302
    Rides
    0
    Quote Originally Posted by dunc
    There's sidelights in the main headlights too, you've probably done the headlights down on sidelights mod you doofus

    Dunc.
    Didn't realise there were two set's of side lights...

    Infact there is only one bulb in the main unit with two elements (dip and beem) so it must use one of them on a lower voltage but I can't see how....

    I thought sidelights made popups come up but no bulb comes on.

  10. #10
    Guest mr-mac's Avatar
    Join Date
    Aug 2003
    Location
    Dunfermline, Scotland
    Posts
    2,302
    Rides
    0
    Workshop manual says

    position 1, Lamps = open, headlamps = no operation. (maybe they only added it on the very late ones if you have seperate sidelight bulbs in the headlamp units) Can you not just pull out the working sidelamp bulb out so only the bumper ones are working like every other 200.... It should pass if you do that....

  11. #11
    Guest
    Join Date
    Jun 2001
    Location
    Fife, Scotland
    Posts
    21,781
    Rides
    0
    Quote Originally Posted by mr-mac
    I thought sidelights made popups come up but no bulb comes on.
    Nah, maybe your headlamp sidelights are busted?

    Dunc.

  12. #12
    Guest mr-mac's Avatar
    Join Date
    Aug 2003
    Location
    Dunfermline, Scotland
    Posts
    2,302
    Rides
    0
    I don't have headlamp side lights if they are seperate bulbs

    It passed without them anyway.....

  13. #13
    Guest mr-mac's Avatar
    Join Date
    Aug 2003
    Location
    Dunfermline, Scotland
    Posts
    2,302
    Rides
    0
    Post

    Here is a previous post on it.

    It's the DIM-Dip circuit (through the Dip bulb fillament)

    There is no soloution on the link but at least we know what circuit it is....

    John

  14. #14
    Guest
    Join Date
    Jun 2001
    Location
    Fife, Scotland
    Posts
    21,781
    Rides
    0
    More wiring fun for the Mac-meister, I'd just leave it if I were you. Not really worth bothering about.

    Dunc.

  15. #15
    Rep type thing Kev's Avatar
    Join Date
    Dec 2001
    Location
    Glasgow ish
    Posts
    36,087
    Rides
    0
    only 2 sidelights, in bumper.
    both need to be working.
    20p bulb, even ur not that tight duncy saurus
    Member no. 31 Project Purplyness
    CA19.5DET 390BHP

  16. #16
    Guest
    Join Date
    Jul 2001
    Location
    Huddersfield
    Posts
    10,064
    Rides
    0
    Quote Originally Posted by dunc
    Cheers Mike, any chance of getting that letter sent anyway John so I can take it along? Would be annoying if I had to take for retest for that one thing.

    Also does anyone know if all side lights need to be working (i.e. all 4 of them) as I only have 3 that work but most cars only need 2.

    Cheers,

    Dunc.

    If they are aucward then get them to phone up the VIA (or ho ever it is that runs the MOT system) and get them to quite the chassie number to them to find out what test it should have. I've had to do this with the last 2 places Ive had mine MOTed as they wont take your word for it. This year I didnthave to coz the place remembered me.... and the car passes with out me doing any work to it

    They also should not have to pay for a retest (if they fail it only on this) as its there fault for running the wrong test on the car. They will have run an S14 test which is for the wrong car and there for is invalid.

  17. #17
    Guest mr-mac's Avatar
    Join Date
    Aug 2003
    Location
    Dunfermline, Scotland
    Posts
    2,302
    Rides
    0
    gonna do the no-popup bodge soon so not that bothered tbh.

  18. #18
    Guest
    Join Date
    Jun 2001
    Location
    Fife, Scotland
    Posts
    21,781
    Rides
    0
    Quote Originally Posted by Kev
    only 2 sidelights, in bumper.
    There's deffo 4 side lights, 2 in bumper and 2 dimmed beam in the pop-ups.

    Dunc

  19. #19
    Guest mr-mac's Avatar
    Join Date
    Aug 2003
    Location
    Dunfermline, Scotland
    Posts
    2,302
    Rides
    0
    Yeah it's the dip part of the bulb dimmed......

    When I fixed an electrical problem I had re-attached an unidentified wire which must have fixed this.....

    I hadn't seen the two main lights with sidelights on since, but they seem to be working now....

  20. #20
    Rep type thing Kev's Avatar
    Join Date
    Dec 2001
    Location
    Glasgow ish
    Posts
    36,087
    Rides
    0
    exactly, it aint sidelights, its the dipped.
    if u switch engine off with switch on side lights, only the bumper lights are illuminated, ie they are the side lights
    Member no. 31 Project Purplyness
    CA19.5DET 390BHP

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •