S13 & S14/a Kickplates

[200sxer]

After mod approval I am now able to offer these kick plates.

These are now available for s13 and s14's:

s14 and s14a


s13



Original details and images on this thread:

http://www.sxoc.com/vbb/showthread.p...0&pagenumber=1

You can also see them by clicking my sig below.

oh and these too


Full Kick Plates hand made by myself are direct replacements for the black plastic trim you have atm, correcting the size error that the Nissan ones have - the Nissan ones now cost £140 at least and that's if you can find them.

These are 0.5 mil aluminium with a brushed and mirror effect.

These are not as rigid as the steel ones, but won't rust or damage your car like my steel ones have to mine.

You recieve the 10 plugs and bolts required to fit these to your car.

You receive your choice of high quality vinyls.

Also I'm not charging postage or packaging in the UK atm

If people aren't happy then I'll offer replacements or a refund as long as they come back to me in a resellable condition.

I'll be selling these at £85.

Payment details:

Paypal using jon@1stwebdeignuk.com will take credit cards too.

J Smith
11 Parkview House
Eastbury Road
Watford
WD19 4PZ

Sould be with you within a week with chq cross over n stuff

Any queries please get in touch

thx

[Packers]

edited:-)

I have the afore mentioned Nissan originals and I find them piss poor fitting where they meet the trim fore and aft.

Could you post a close up of how yours fit in this area please. Could be interested in purchasing some.

chrs

Phil

[Mark]

Brens is a stick on that goes over the existing kickplate, these ones replace the whole plastic Nissan shite

[200sxer]

Originally posted by Packers
edited:-)

I have the afore mentioned Nissan originals and I find them piss poor fitting where they meet the trim fore and aft.

Could you post a close up of how yours fit in this area please. Could be interested in purchasing some.

chrs

Phil

np need to wait till the rain passes. I've made them the same as size as the Nissan ones however, I can make em a few mill longer if you think you need it. If you give me the length that you'd be happy with then that would be ideal.

[200sxer]

I guess this was you Mark that made this a sticky, thanx

Want a set of complimentary sill plates?

[Mark]

now thats a tempting offer

[aBoijj]

Kind of a thread-jack but it's on topic... any thoughts on whether you're likely to make these for the S13s at some stage?

[200sxer]

Originally posted by aBoijj
Kind of a thread-jack but it's on topic... any thoughts on whether you're likely to make these for the S13s at some stage?

I'm gonna look at an s13 sill this month and see how much difference there is

[aBoijj]

Originally posted by 200sxer
I'm gonna look at an s13 sill this month and see how much difference there is

Good Stuff

[Jalfrezi]

yep, I'll take a set with the nismo vinyl

are you planning on making the ally centre console stuff again?

[200sxer]

Originally posted by Jalfrezi
yep, I'll take a set with the nismo vinyl

are you planning on making the ally centre console stuff again?

Ok cool. pm me with your details

I still do the gear surrounds and have a stereo surround too. I'm currently intalks with JollyF to see if I can provide a whole kit though

[bens14]

Originally posted by 200sxer
Ok cool. pm me with your details

I still do the gear surrounds and have a stereo surround too. I'm currently intalks with JollyF to see if I can provide a whole kit though

I would definately be interested in the whole kit

By whole kit do you mean gear surround steroe/din surround and sills, mmmmm that would be a nice shinny kit

[200sxer]

By whole kit it would be what they sell on that stupid wood look

JollyF is giving me the bits he's removing for me to have a look at, will take a little while though.

BTW what do you mean by sills?

[alexjj]

Can you tell me if your doing a matching centre dash aluminium (NOT aluminUM sorry yanks - learn to spell) fascia bit, you know, kind of like your gear lever surround?

I am toying with getting the gear lever surround, but in my opinion, it would look daft unless the whole centre dash bit was also in aluminIUM as well.

What say ewe?

Cheers
Alex

[200sxer]

Well I can do a stereo surround to match the gear surround, but the heater surround is not quite right.

The ones that you can buy online are sticker ones, which just lay flat on the existing trims and you can still see some of the black plastic IYKWIM and they charge a fortune for that crap.

My gear surround hides all the black plastic so it looks nice an solid and dare I say it, original this is in 0.5 mil aluminium. The stereo surround too wraps around with only a bit of the fag lighter depth visible, this has to be in 0.02 mil aluminium any thicker and it interfers with the ashtray play.


I have spent approx £350 getting this far with the interior trims, it's a work in progress

[alexjj]

Let us know when you do a whole interior fascia kit (gear surround, centre console, wireless and heater surrounds).

And let us know how much it would be, to such worthys as us SXOC members...

Cheers!

[VIDAL BABBOON]

Hi m8

Will take a set of the non drilled kickplates off you

And could you also tell me what vynel's you have on sale ?

Nick

[200sxer]

Originally posted by NICK@SW-CC
Hi m8

Will take a set of the non drilled kickplates off you

And could you also tell me what vynel's you have on sale ?

Nick

Vinyls are not "for sale" so to speak. tis a complimentary gift for purchasing a set of plates .

You can have pretty much what you like...

[VIDAL BABBOON]

And there was me trying to be clever for you lol

I will take a set of Blitz vynel's off you then m8

Nick

[200sxer]

Originally posted by NICK@SW-CC
And there was me trying to be clever for you lol

I will take a set of Blitz vynel's off you then m8

Nick

lol

Yes you clever me a bit slow

My details are on the 1st post

ta again