Spec s sr20det conversion

[boustie]

Thanks for that I have an engine hopefully coming this week from a trader on here.
What intercooler did you use? And also did you do the loom yourself
Thanks for the reply

Sent from my HUAWEI GRA-L09 using Tapatalk

[s15_ftw]

That's OK. I think you messaged me regarding the swap back in November... I was on holiday for a few weeks in Iceland and didn't quite get around to getting back to you, apologies.

The intercooler was just a second hand one for an s14 I picked up. I completely removed my battery tray, turned the battery to the side (I have a small battery) and cut a hole so the intercooler pipe could come up past the battery. The other side should already have a hole there. I had to trim the pipes a bit and improvise slightly to get it to fit properly but was a fairly easy job. As for the wiring, I found a guy on here, goes by the name of Norfy. He done a by post plug and play deal for me which was fairly reasonable. Although, looking back on it now I would probably have just given it a go myself as it's pretty straightforward I think.

[boustie]

Brill, thanks very much for the pointers really helpful.

Hopefully will get an engine this week so i can crack on.

[boustie]

Let down on the engine I was waiting for....
I have seen a 180 sx none vvt, anyone know if that would do

Thanks

[boustie]

Oh well committed now just bought a rb25 engine. Thanks to adzsy. Was inspired after reading his build thread....

Sent from my Hudl 2 using Tapatalk